My iPod touch wont turn on..but the buttons dont work

When the buttons broke it was still working,but i had to turn it on with a charger. But now when i plug it in nothing happens!!

Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recovery mode use one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
For MAC or PC
The Firmware Umbrella - TinyUmbrella
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar       

Similar Messages

  • 1st Gen. iPod touch wont turn on. Home button doesn't work. Can't reset.

    Hi there.  My 1st generation iPod touch wont turn on.  The battery has drained completely, and the few times this happened in the past, I could just reset it by holding the home and top buttons, the iPod would turn on, I could plug it in, and then it would charge--no problems.  However, now the home button does not work, so I cannot reset it. When I plug it in to the charger, the Apple logo appears for about 20 seconds, then disappears.  Also, if I hold the top button for about 2 seconds, the same thing happens (Apple logo appears for about 20 seconds, then disappears).  So, it doesn't turn on, wont reset due to the home button not working, and can't connect to the computer or iTunes.  However, it still has some life in it because the Apple logo always appears when it's plugged in or when I hold the top button.  Can anybody help?  Thanks.
    ~Brett

    See if this program will place the iPOd in recovery mode so yu can restore the iPOd.
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If the iPod still has its original battery, it could be that the battery finally bit the dust.

  • 2nd generation ipod touch wont turn on. The screen blinks but the apple icon doesn't show up.

    I have a 2nd generation ipod touch that I got from a friend. I drove all the way across the country (three day trip) and it worked perfectly. It was in a hard case and has no damages to it. I haven't dropped it or gotten water on it at all. But for some reason the screen wont turn on. It blinks on and off when I plug it into the charger (and theres like a soft clicking noise that I hear when the screen blinks) but the apple logo wont show up. And it doesn't seem to actually be charging. It doesn't seem to actually die all the way either.... It's weird.. but I know no damages have happened to it so I don't know what to do. I've tried to reset it (pressing and holding the home and power buttons) but that wont work either. Help?

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Ipod touch wont turn on and the power button is broken. Itunes also doesn't recognize my ipod and I haven't trusted my laptop. PLEASE HELP

    My ipod touch turned off while I was asleep and I don't know what to do. My power button is stuck so I can't do anything about it. Please help me!!
    Ipod touch 4th generation
    8gb

    - Make an appointment at the Genius Bar of an Apple store. Yo have a hardware problem other than the Home button
      Apple Retail Store - Genius Bar

  • My ipod touch wont turn on past the apple screen

    help how do i start this ipod up ?

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My ipod touch wont light up but app from that works fine, my ipod touch wont light up but app from that works fine

    my ipod touch works fine appart from the screen is very dark and adjusting the brightness doesnt work how can i fix it

    Back up first (Time machine) as much as possible.
    Un-install and re install Itunes.
    First and foremost download the updated iTunes from apple website. After downloading Uninstall itunes and all its component ( Dont worry, itunes library where your movies and music is located will not be deleted. Please follow instructions on the apple support page). The problem might be the AppleMobileDevice.kext
    Heres the instructions on how to un install iTunes
    http://support.apple.com/kb/ht1747
    Hope it hepls

  • My ipod touch wont turn on and screen flashes how do i fix it?

    my ipod touch wont turn on.  the ipod is charged to the computer with a working cable(tested) and it is flashing the red charging sign and the plug me in low battery sign.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Ipod touch wont turn on i tried restoring it but every time i do it just says its waiting for the ipod to respond. meanwhile my ipod is no longer a black screen but the apple logo with a loading bar underneath that after leaving for 8 hours hasnt moved.

    my ipod touch wont turn on ive tried restoring it but every time i do it just says its waiting for the ipod to respond. meanwhile my ipod is no longer a black screen but the apple logo with a loading bar underneath that after leaving for 8 hours hasnt moved.

    Try:
    - Another cable
    - Another USB port
    - Reboot the computer
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My ipod touch wont turn on the screen is balck i tried connecting it to my computer but it wont work.. Can anyone help me ?

    My ipod touch wont turn on, The screen is black and i tried to plug it inot my computer and it still wont turn on.. Can someone help me ?.

    After charging for at least an hour I would try in order:
    - Resetting the iPod:
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next try restoring the iPod via iTunes.  You may have to place the iPod in recovery mode for iTunes to see the iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    - Making an appointment at the Genius Bar of an Apple store

  • My ipod touch wont turn on!! the apple logo appears for five seconds and then it goes to a black screen and it has been repeating this when im not even touching it!! help!!

    my ipod touch wont turn on! i pressed the power button and the white apple logo appeared for five seconds and went to a black screen, and then back to the logo for 5 secs and back to the black screen for 5 secs. im not touching my ipod and it is still doing this. i did leave it onover night to update ios, is this why??

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • My ipod touch wont turn on at all even when i connect it to my computer

    So my ipod touch wont turn on at all even when i connect it to my computer! it was working fine then outta no where it wouldnt wanna turn back on. i tryed resetting but it doesn't do anything. Also when i put it on the charger it seems to get pretty hot...is the normal? help please...

    There are two different causes of this, either it has been overheated, or the iPod just crashed.  If it crashed, there is one simple step to fixing it.  Letting the battery die.  Do not connect to a charger port, or the device may get overheated, and need to be replaced.  Once it dies, it normally will show the icon, that is needs to be charged. Once you charge it back up, it should go back to normal.  If this doesn't help, then contact apple to the nearest store about getting a replacement.

  • Ipod touch wont turn on how do I fix it?

    my ipod touch wont turn on, it was working fine and then the screen got dim and now it wont turn on. If I connect it to the computer it shows in Itunes but the screen does not come on. any help?

    Try the remaining items of:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • My old 1st gen ipod touch wont turn on and makes a clicking sound when I plug it in.

    My old 1st gen ipod touch wont turn on and makes a clicking sound when I plug it in. The ipod doesnt turn on when I plug it into the wall, even if I let it charge, and itunes won't recognize it. I have tried to reset it with the home and power buttons. Whats wrong and how can I fix it? I think it might be the memory or the battery. What could the clicking sound be related to? Thanks

    Try placing the iPod in recovery mode and then try restoring the iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    After that I would make an appointment at the Genius Bar of an Apple store.

  • What do I do if my ipod touch wont turn on

    My ipod touch wont turn on...my daughter was using it and it just went black.  It has been needing to be charged more frequently lately...

    Do you see it charging? If it does then what does the screen show? Or try holding the power button for a few seconds, what shows on the screen?
    Else just press and hold the Power and Home buttons together until you see the apple logo.

  • My ipod touch 3g turns on but doesn't have any icons. What do I do?

    My ipod touch 3g turns on, has the display picture, but doesn't have any icons. What do I do? No safari, music, videos, app store, itunes, no apps at all! I've tried restoring it, but it tells me "the ipod could not be restored. This device isn't eligible for the requested build". It won't let me do anything. Goes back to the empty screen and search. HELP!!!

    The Apple article listed at the bottom of this post states:
    Cannot be restored. This device is not eligible for the requested build: If you receive this error, you likely do not have the latest version of iTunes installed. Check http://www.apple.com/itunes/download/ for the latest available version of iTunes. If you do have the latest version of iTunes, this can occur when you attempt to restore using an older .ipsw file. Try restoring in a new user to ensure that iTunes downloads a new IPSW. Downgrading to a previous version is not supported.
    From:
    http://support.apple.com/kb/TS1275

Maybe you are looking for

  • Transport error while adding new Navigational Attr to InfoCube on BIA

    Hi Gurus, I have added a new field in the Profit Center Master data(0PROFIT_CTR_ATTR) in R/3 and the changes seem to be working fine in BW. This 0PROFIT_CTR is present in one of the InfoCubes that we have on the BIA. I have turned 'ON' the newly adde

  • Missing self ID for node ...

    For no apparent reason, my G5 has been having kernel panics (i.e., the grey screen full of text in different languages, telling you to press the power key). It has been doing it repeatedly, and I'm not sure I "fixed" it--I turned off a FW800 drive, j

  • How do i transfer music from my ipod to my iphone

    I just got a new iPhone and i have all my music on my iPod and id like to transfer it from one to th other but dont know how

  • Can I use "BAPI_MATERIAL_SAVEDATA"  Mass Change Material for IS Retail

    Hi, I have customize program to do mass material changes for IS Retail. Currenlty we are using BAPI_MATERIAL_MAINTAINDATA_RT to do the changes for each selected article and site, it could be 70k combination. since BAPI_MATERIAL_MAINTAINDATA_RT cannot

  • Missing Menu on Crystal Report OEM Version XI

    File/View/ Edit Menu Missing in Crystal Report OEM Version XI.  Unable to access with short cut keys. Shows the menu when program starts, lose the menu when I open any reports (even samples)