My ipod tuch is disabled and it wonts me to canect it to itunes but when i puge it in to the compter there is no icon that shows up for it so what am i supos to do plz help .
my ipod tuch is disabled and it wont me to canect it to itunes but i cant find the icon for it on the desck top on my computer my computer is a emac plz help me
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Similar Messages
-
I have been without mu IPhone 4 since yesterday now as I tried to do the IOS6 update and since then it has messed up my phone and I am unable to access any of it's functions as it is locked on the update screen.
My phone was bought through Vodfone and have been on their network ever since, never had any problems like this.
It prompts me to connect to ITunes and when I do it will not go any further as stating 'No sim card is inserted in the IPhone you are trying to activate'. Well there is a sim in there and I have removed it and reinserted it on many occasions today. I am also not trying to activate my phone as all I did was try to the update which I was prompted to do in my setting!
I have seen many people on the net today with the same or similar problems but as yet I am to find a solution!
Help, please as it is driving me crazy!!!Try a Hard Reset.....
Press and hold the Wake / Sleep button AND the Home button at the same time, keep them both pressed until the Apple Logo appears on the screen, it can take 10 or more seconds. Ignore the swipe to turn off message. -
Can anyone help? This was a birthday present for me and it's only about a year old.
Connect it in recovery mode using the instructions in the Apple support document below. This will allow you to bypass the passcode.
http://support.apple.com/kb/ht1808
B-rock -
I have an ipod touch first generation and it is telling me to connect to itunes but it isn't recognized by itunes when i try to connect it. what do i do?
Try disabling your security software and turning off the Firewall on your PC.
Disable antivirus software
Turn Windows Firewall on or off
iOS: Device not recognized in iTunes for Windows <--- definitely try the instructions for resetting the AMDS. -
I have downloaded firefox but when I open it I get the following message 'Firefox has detected that the server is redirecting the request for this address in a way that will never complete'. What do I do?
See:
* http://kb.mozillazine.org/The_page_is_not_redirecting_properly
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies" -
I have the movie in iTunes but when i try to transfer to the iPod it say that its not authorized... what can I do.. The computer is authorized... It was a digital copy...
melaniefrommadisonville wrote:
I want to try to un-install iTunes then re-intstall but am a new mac user and don't know how to do this.
click here and follow the instructions. -
please help. getting desperate. i cannot set up 3g on my ipad 2. when i go to mobile data in the settings there is no option to view account. which is apprently what i need to click on, any help greatly apprectiated
I got mine (2 weeks ago) 64GB WiFi+3G (Verizon) from the apple store online
I didnt have to do anything to it, turned it on, activated it, got it on my home network then I signed up for the 3G data service, it works where ever I happen to be. (if there is an unknown WiFi connection available it asks me if I want to join before it continues to connect to the 3G when I am surfing or getting e-mail)
do you have an Apple Store close enough to travel to?
I am only assuming here, but since you have a SIM you are not in the US correct? -
My ipod is disabled and says connect to itunes but when i do it says unlock the with the password
my ipod says ipod is disabled connect to itunes but when I connect it to itunes it says unlock ipod with password but I cant do that
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
I have an Iphone 4s 32gb and i'm trying to update it to ios 5.1. i've downloaded the software from itunes but when i click on it to install it to my actual phone it says: "There was a problem downloading the software for Iphone 'Donnbjj1's Iphone' . An unknown error occurred (1480)."
iOS: Resolving update and restore alert messages
For error -50: See error 13 and 14:
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network. -
My Ipad is disabled and tells me to connect to Itunes. When I do that, I get the message to enter passcode on my IPad but I can't because it's disabled:(
In one of the options, it tells me to sync as if I have never synced to itunes but I'm afraid it will reset to factory settings and I will lose what I had on Ipad.Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software. -
I wanted to suspend my verizon service, but I couldn't. The web shows "the service is not available at this time. Try it later..." How can I address this problem??
Hi Shell126 - We certainly want you to be able to easily manage the account while so far from home! Have you tested a different web browser? Also try clearing the cookie and temporary internet files on your current browser. I am eager to help get this resolved!
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport -
I have been told by two different AT&T stores to plug my phone into iTunes and it will accept it, and give me instructions to restore my phone. However, each time I plug it in, iTunes says that it can't access my phone because it's locked. What am I supposed to do now?
Looks like your iPhone is disabled because of incorrect passcode. You will have to use recovery mode to restore the phone. Follow this link for details on how to perform restore in recovery mode.
http://support.apple.com/kb/HT4097 -
Help! I don't know what to do
The problem is your friend's music does not belong to you. It is owned by your friend.
I'm afraid you cannot do what you are trying to do. Restoring the iPhone is what you would have to do.
In the future, put your music on the computer and transfer it to the iPhone, not the other way. -
I want to upgrade my phone to the new software and it says that I have purchases from my phone not added to my itunes library, so when I go to the songs they are all grayed out and I cannot download. So please help me.
Best route would be to shutdown the computer and restart from cold.
Make a secure backup of your Songs.
Uninstall iTunes.
Install the latest version of iTunes. -
Any other help? This is really a rotten upgrade.
Thanks for your suggestions. For those with a similar problem I found a solution at:
https://discussions.apple.com/thread/3137602?start=60&tstart=0
Look under entries by velocius, who tracked down the problem to the 10.6.8 socket (/usr/libexec/cups/backend/socket) and also the later entry where he posts a link to the old 10.6.7 socket file that works. (The first link posted has the new 10.6.8 file and won't help). After replacing the socket file, reboot.
Maybe you are looking for
-
Portal Run time error when created a seperate role for Transport package.
Hi Experts, I have created a seperate role for Transport Package(import/export iviews). Normally we have transport package functionality in system admin. Below steps i followed for creating the new role(trans admin) 1.Copied SAP provided system admin
-
Printing Slug Area in CS3?
Hi, folks, Our documents have Comments boxes in the slug area of the page that an InCopy CS3 user would like to be able to print out in Layout view. I don't see that option in the Print dialog; since these Comments boxes are part of the article, the
-
When I use the include tag (<!--#include file="top_nav.html -->) it works on the internet, but when I go to edit the rest of the page in the design view, everything below this tage disappears. Any solutions?
-
Br CC is freezing every time I try to look at my files
Br CC has not been working for at least 2 weeks. It tells me it can´t read the cache and to purge it. I have done this at least 50 times and nothing. I uninstalled the APP and installed it back and nothing. I cleared the iMac to have at least 300 TB
-
Put movie behind existing elements, how?
I am placing a movie clip in the swf by AS. In the resulting swf, It's hiding the buttons that are already on the stage. How do I get that movie clip to be behind other elements on the stage? Here's the background and details: In Flash CS4, I hav