My iPod turns on and then straight off again, it doesn't even go to the lock screen. What do I do, PLEASE HELP ME
My iPod is stuck just going on and off. It doesn't stop with or without the charger . It doesn't go to the lock screen so what do I do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
My friend loggen in with his instagram account on my phone then logged off, now i see his instagram notifications on my lock screen , what can i do about this problem ?(
I am very happy to report that my server connection tech, which I called via landline, informed me to : 1. Open Tools 2. Scan down to Clear Recent History 3. Delete All. That was it! Unbelievable! Six hours of searching through the Windows catagories. I checked the results on an internet site, and viola! It was gone! Mozilla Firefox seems to remember the usernames and passwords irregardless of the option window that asks if you if want it to remember the user and password. I finally got in touch with my friend and he said he did not answer yes to the window, even though he was aware of it. No damage. I surely do appreciate everyones' concern in this, now what seems to be, a very simple solution. Cudos to Firefox! Thank-you! P.S. I now have to enter my information at the beginning of any password protected sites...no harm done! My friend is now condemned to the 'user account' site! lol...
-
My iphone 4s won't turn on and it is in DFU mode, but my computer can read the device.... PLEASE HELP , and my iphone is not jailbroken
http://www.youtube.com/watch?v=uuulql2u37U The title is "DFU Mode vs. Recovery mode - Which is Which? and How to Enter AND Exit (iphone, ipod, ipad) It helped me, Hopes it Helped you! Also you do not need to Restore!
-
My iphone keep coming on then freezing and then shuting off again what do i do
My iphone keep coming on then freezing and then shuting off again what do i do
Try a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps... -
after resetting my phone to factory settings, it will not turn on. When i press the power button a white screen and black apple pop up. it stays on that screen and will not go to the home screen, it will just die. please help!
Make sure it is charged for about 10min using the adapter, then connect in recovery mode, explained in this article:
If you can't update or restore your iOS device -
Why don't pictures from a slideshow made in iPhoto and then burned on to a DVD in iDVD not use the full screen?
All I want to do is send my family the pictures for them to be able to see them on most dvds and use manually control.
If you want set top DVD player playback, I suggest you create a a series of slideshows IN iDVD that each contain a MAXIMUM of 99 images. Do not create the slideshow in iPhoto or iMovie.
Is there an easier way to do this, bypassing iDVD?
Some DVD players will play a disc containing jpeg images -
How do I cancel the distance between the numbers?
I'm having trouble copy phone numbers from the phone book and send it via SMS
This problem I've found in the Arabic language, numbers appear in reverse
Please help
System 6.0.1MPEG-4 should not be used in FCP unless it is converted first or optimized in the application.
Trash your preferences. Trash your project render files. Switch off background rendering. Do not re-render. Export your projects.
Ignore the last frame and first frame indicators. -
I have a 2007 macbook that is stuck on the loading page and after a while it shuts down by itself. I don't know what to do anymore please help!!!
Hello Sebas4224
Start with the article below to troubleshoot issues with your MacBook starting up and staying on. Let me know how it goes in case it does not help and I or others can assist you further.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
Regards,
-Norm G. -
2009 Mac Pro turns on and then powers off a few seconds after.
Help!!!
I have two Mac Pro's with separate issues. First Mac Pro does turn on but then cuts off by the time it gets to the Login window. I opened it up and saw that when the computer is on, there is a red light in the middle of the processor board. Is this normal? And what should i do to see what is causing this? I had 16GB RAM but i tried swapping out chips to see if maybe it was a RAM issue. Same issue even if all i put in is 2GB of RAM.
Second mac Dosent even turn on. Also a 2009 model. the red light that normally blinks once when you plug power in on the Main board, doesn't even flicker. I feel it's the power supply, but before i try swapping power supplies i thought i would see if i could get a second opinion.
Please Help
ThanksOn your first example, if the Mac detects Directory Damage such that the Boot Volume cannot be mounted, it will run the equivalent of a Disk Utility ( Repair disk ) at Startup. If that does not repair the problem, you will not be starting up, so it powers down.
On the second one, the traditional method of debugging those difficult problems is to remove everything that could be dragging down power, and hope for the Chime. Yes that means everything. If you remove all the RAM, but it is otherwise working, it will flash the power light to indicate "not enough working RAM to start up". Add back some RAM and you should get the chime. add back the graphics card and you should get the blinking question mark. Add a boot drive and... so on. -
Ok. My brother has an old Ipod nano. It's the tall one with the tiny screen. Anyway, he tried to turn it on one day and it just flashed white and then went black again. We tried everything we could and it still wont work. Now it wont flash unless it is plugged up to the computer. How do I fix it so it will work again?
Have you checked the volume button? It might be physically stuck. To determine whether a hardware repair is needed, you need to follow these steps:
1. Try doing a hard reset:
Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
After that: test the device to see whether the issue is solved.
2. If the issue is not solved, you should backup the device and restore it as new.
In that case, use: http://support.apple.com/kb/HT4137
NB: set up as a NEW device because a software issue will be in the backup.
If the issue persists after restoring as new, you should offer the device for service.
If you get specific error messages/codes in iTunes when updating/restoring, check this: http://support.apple.com/kb/ts3694 for causes and solutions
Good luck
Stijn -
My phone doesn't make sounds in the lock screen and won't take calls
Hi, for the past 2days my phone no longer plays the alert tone in the lock screen for text messages, calender events, facebook events, voicemail atert etc however does if the phone is unlocked and I am using it. Also, nobody can call me without it going straight to voicemail however if they call a second time then they can get through and it rings.
I cannot find a thread where anybody else had a similar problem.
I have turned everything and off a couple of times and have checked that everything is on (i never turned it off) and have done a hard reset. All I can think off is to completely restore my phone to factory setting but I don't want to lose all my stuff!
Can anyone help?
Thanks everyone!
JDo you have Do Not Disturb enabled?
Have you checked the position of the Mute switch on the left side above the volume buttons? -
HT4623 My apps and my phone freeze up and go back to the locked screen what can I do?
My apps and my phone freeze up during use and go back to the locked screen. What can I do?
Hi theora,
If you haven't already done so, does restarting or resetting the iPhone help the issue?
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If not, we may want to restore your iPhone using a computer with iTunes.
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Thanks,
Matt M. -
I was in the middle of updated iOS7 onto my 4s then it crashed, tried to restore and backup and it wont power off restart it just shows a black screen.
Tried the tips
Does not recognise my phone as I updated Itunes to see if this would work and I have lost all my back ups and every thing,
when i try the power on butter and the home button I get the apple icon, then it shows power cord and itunes logo and then returns to a black screen, I can hear it beeping like when you put it on the charge each time this happens on my PC.
please can anyone else help me???Unable to Update or Restore..?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Take your time... Pay particular attention to Steps 3 and 4
Note:
Some users have reported as many as 8 or 9 attempts were necessary before success. -
Before this happened, it kept on pressing buttons by itself and i couldn't do anything. I restored it and it still didn't work, so I tried again, and after 5 more restores, it still wouldn't work, Then the battery drained from full to dead in literally about five seconds. Now, it won't charge or turn on. My computer doesn't even say it is plugged in anymore. I've tried 3 different cords, both in a wall outlet and my computer, and it still won't work. Help!
Well there is one thing you can try... hold down the home button and lock/sleep button at the same time and don't forget to hold it. It should turn on. (By the way what you are doing is a restart, if you were on your iPod Touch on the home screen and you did thins it would reboot, and that is exactly why you are doing this)
-
I am designing an interactive catalog in a pdf. Is it possible to have the images as a thumbnail and then click them to enlarge the image and then click again to make them go back to the original size?
Thank you in advance!
StephanieIt can be done with Show/Hide buttons:
Here's a button created from a small version of the image (notice that it's selected in the image below):
The small button has a Show/Hide Buttons and Forms action. It's action is to make the Larger Image visible (eyeball turned on) with the small image hidden (eyeball turned off).
The large image is also turned into a button (shown below):
Notice the checkbox "Hidden Until Triggered". The large button is hidden until it's triggered by the small button. Clicking on the large image also causes a Show/Hide action which shows the Small button and hides the large button.
Maybe you are looking for
-
I have a new Mac Mini and a 7 year old Mac monitor. The connectors dont match. What to do?
-
Can iTunes split content/settings to two different devises on the same computer?
My friend has an iPod and has set up iTunes with his settings and songs. I am getting an iDevice, we share the same computer but we do not want the same things on our devices. Can iTunes have different settings for different devices? What can we do?
-
What are the minimum requirements to successfully Synchronize a SharePoint 2010 Calendar or Task List with Outlook 2010? SharePoint permission levels required for the user profile? Does the user need top level permissions on the SharePoint site? What
-
PSCS4 11.0.1 (OS 10.5.6) crash with Raw files
Throughout the day, I will open a Raw image in the Raw dialog box and CS4 will crash (see report below). Sometimes it will crash right when I quit CS4. Every few days it will crash for no apparent reason. Very annoying. Any suggestions? I only open o
-
I swich to Oracle11g express and create user CREATE USER LEO IDENTIFIED BY xy DEFAULT TABLESPACE USERS TEMPORARY TABLESPACE TEMP PROFILE DEFAULT ACCOUNT UNLOCK; -- 3 Roles for LEO GRANT AUTHENTICATEDUSER TO LEO; GRANT CONNECT TO LEO; GRANT FER_ADMIN