My iPod Video hangs when changing track

Just now, my iPod Video hung when changing to another track... So I had to reset it (something I don't want to do). Does anyone have the same problem?
By the way, I didn't charge my iPod till it says it's full. How much would it affect the battery capacity? (It only last for about 5 to 6 hours...)

mine does this too
and occasionally it hangs (pauses) when changing screens
also when i click for the album art in full screen it often takes about 5secs+ for it to register

Similar Messages

MPD hangs when changing tracks or seeking

MPD is VERY touchy when I change the current playing track, or seek.
I've been using ncmpcpp, but I witness the same behavior with other clients too.
Since I've seen other people mention the same stability issues, I was wondering if anyone came up with a solution for this ?
I was hoping to use mpd to build my music db, but I 'skim' through a lot of music, so it's not usable to me right now...
Will appreciate any help.
Cheers
Last edited by disturb (2010-01-02 10:54:20)

disturb wrote:
MPD is VERY touchy when I change the current playing track, or seek.
I've been using ncmpcpp, but I witness the same behavior with other clients too.
Since I've seen other people mention the same stability issues, I was wondering if anyone came up with a solution for this ?
I was hoping to use mpd to build my music db, but I 'skim' through a lot of music, so it's not usable to me right now...
Will appreciate any help.
Cheers
http://wiki.archlinux.org/index.php/MPD
Try that link out and try setting it up via user in the alternate setup. I had issues it running as deamon... This way it will run as a local user and just add it to a start script when you start your .xinitrc or autostart.sh...
Last edited by JuseBox (2010-01-02 11:50:17)

Music Stutters when changing tracks encoded using FLAC

When changing tracks encoded with FLAC, the song stutters a bit at the beginning of each song. The rest of the song continues to play fine. It's just at the beginning when changing tracks manually.
These very same tracks played fine with the previous firmware on the iPod and play fine on my MacBook now using iTunes.
Anyone else running into the same thing?? Everything works, but its rather annoying!!!

disturb wrote:
MPD is VERY touchy when I change the current playing track, or seek.
I've been using ncmpcpp, but I witness the same behavior with other clients too.
Since I've seen other people mention the same stability issues, I was wondering if anyone came up with a solution for this ?
I was hoping to use mpd to build my music db, but I 'skim' through a lot of music, so it's not usable to me right now...
Will appreciate any help.
Cheers
http://wiki.archlinux.org/index.php/MPD
Try that link out and try setting it up via user in the alternate setup. I had issues it running as deamon... This way it will run as a local user and just add it to a start script when you start your .xinitrc or autostart.sh...
Last edited by JuseBox (2010-01-02 11:50:17)

Hanging when changing channels

I am currently on release 1.9 build 10.95. Ever since the software was "upgraded" I have noticed the following:
Intermittently, when changing channels, by selecting from the guide, often the system will hang, for up to a minute, before the channel finally changes, almost as if it is waiting for something to time out.
Intermittently, when I use the remote, the green light will flash on the box showing that a signal has been received, but nothing happens. I may have to issue the command two or three times.
This has happened on all three of our DVR's - Motorola QIP - 7216 1
I have reset the box via software, physically reset the box by pulling the power chord, and put new batteries into the remote, numerous times, and the problem persists.
Is it only me, or has this problem been reported under a different heading?

Usually, you can turn off a video setting and it speeds up the responce time of the set top box. Try hitting menu - settings - video settings - sd override and selecting off. There are other settings in there but they dont seem to affect the responce time much.

Ipod video "Skipping" on certain tracks

Can anybody help with this ?
When playing back a couple of tracks on my ipod video have been "jumping" and "skipping".
Could this be a serious problem ? I am worried the hard drive is damaged. Do you get damaged sectors on a ipod hard drive like on a comptuer hard drive ?
If anyone has any advice at all I would be really grateful,
Thanks,
Martin

Did you try the 'Five R's':
Reset, Retry, Restart, Reinstall , Restore
Reset your iPod.
Retry with a different USB port.
Restart your computer and make sure you have the latest software updates installed.
Remove iTunes software and then reinstall iPod and iTunes software from latest versions on the web.
Restore your iPod. See “Updating and Restoring iPod Software” in the user's guide.

Macbook Pro Hangs when Changing locations

Hello Everyone,
I have a Macbook Pro 2.16 running Leopard 10.5.1 and every now and then when I change network Locations from Wireless access point to anther (WPA Personal to WPA Enterprise or vice versa), the laptop simply hangs?! Mouse stops moving and nothing responds. I need to hold down the power button to restart the button. It's go em really worried as I have am using FileVault and crashing the box like this will like lead to corruption in the FileVault volume. Is anyone else experiencing this? Any suggestions? It's never happened to me in Tiger!
Remy

I have wondered if VMWare fusion is involved simply because it sets up a lot of network devices.
VMWare isn't necessary for this to happen, since I've had it happen a few times to me, too, but I don't have any of the Windows stuff: Boot Camp, Parallels, or VMWare installed.
I think you're right that it's only when I switch from wireless to ethernet. I've had a couple of theories along the way, but each time it happens, things seem to be a bit different, so now I'm not sure.
One interesting thing is that at least once I did manage to get control of the machine (sort of) by logging in via SSH. Because I was in a hurry to get to work, I just shut it down using the Terminal. So I don't know if I could have gotten complete control by killing the login window, for example.
One thing I've noticed is that it seems to happen shortly after I've rebooted anyway. Yesterday morning I installed a security update and the new iTunes and QuickTime, which meant a reboot. And last night I got this hang when I was getting the computer ready to go to work today. But before I updated yesterday morning, the uptime was over 30 days. So it's not common for me.
I think, in another post, Gnarlodius mentioned only changing the location via the System Preferences and not having this problem. I may try that for a while.
charlie

Ipod video crashes when I attempt to eject after sync (Windows XP)

My ipod video synced perfectly in itunes for first two months. About two weeks ago, however, the ipod started crashing four out of five times when I try to eject it in itunes or stop the disk from Windows' "remove hardware safely" dialog box. It also crashes after syncing automatically when I disable disk use. It syncs all files fine, but when I attempt to eject, it goes directly from "Do not disconnect" to the apple logo, with the backlight flashing on and off periodically. At that point it will not reset, and I have to go into disk mode and restore it to get the ipod to show a menu again. I've restored it now about 10 times, and have reinstalled itunes but am still experiencing the same problem.
Please help!

If you're running iTunes 6.0.5, I would need the crash log to figure out why you're crashing.
Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
drwtsn32 -i
And hit return.
This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log" If there's already a file there, it most likely has multiple crash logs in it (new crash logs are just appended to the end of the file). So, delete this file. This will make sure you're not sending extra information I don't need. These crash logs are text files, so you can open them in notepad or whatever to see what information you're sending.
So, get the machine setup to collect crash logs, do the thing that makes iTunes crash. Send it to me. It doesn't hurt to put the URL to this discussion thread because I get a lot of these messages and are easily confused.

Sound is hanging when changing patch.

Hello.
The problem is that if i am pressing the sustain pedal while im changing a patch, the last notes in the previous patch stays on. it doesent goes of untill i hit the space bar or panic button.
Help.
Could it be that i need to configurw some All notes off when changing patch? Not an idel solution but that would be better than to end upp with a hang in a live situation.

Im not expessing my self corectly.
The way i want it to work is as you describe it. The note from the selected patch sustaind untill the pedal is released. Thats the way my master keyboard (Roland A80) works.
But the problem is that it newer STOPS sustaining ( after patch change, and pedal release).
Im using a New MBP, New Motu midinterface and a Clavia Stage88 keyboard.
If MS comes with the sustain feature (and thats what i want), i will check my pedal (polarity?) delet the old pedal and make a new. mayby something whent wrong whan i created the pedal.
Does that sound like a good plan?
Message was edited by: 45" Flathead

IPod video hangs

Hi,
Am using the ipod video which i purchased on 22nd of Feb. I encountered a problem today while trying to load some video stuff.
I had kept my photo slide show in pause mode and connected it to the PC. I now am at loss as my ipod is simply not responding. It still remains with the same still picture that i was viewing. I had tried resetting my ipod also, but of no help!
please suggest some a good way to get it working without having to lose my files!!!
Thanks,
Arch

Welcome to Apple Discussions!
Next time, please post in the Using your Fifth Generation iPod forum.
Anyhow, try a reset by holding down menu+select...
Resetting iPod
It may take several attempts. The link above also has tips as to what to do if the reset does not seem to be working.
If you have tried a reset several times and it won't work, you will need to let the battery die and then charge your iPod back up.
btabz

Ijust got my new ipod video,and when putting videos onto it,,,,,

the audio doesnt come out,so i went on the help faq and it said i needed a third party video converter to put the videos on it.So does anyone here know of any?And if you do can you tell me how to operate it?Thank you in advance

Here's one of many:
Hopefully in answer to the many posts on “how to get various video formats onto your iPod” I have put together a summary of applications I use. I have tried a few others with varying amounts of success (some of which are free) - I have finally plumped for the software produced by Xilisoft as providing good quality video relatively affordable cost for use withPC’s and numerous MS operating systems. The link below takes you to their site which not only allows you to download trail versions of their software but also has a comprehensive set of tutorials and FAQ's for their iPod video conversion software.
I have regularly used these applications to convert various file formats to iPod friendly video. They are simple to use although frequently processor and RAM hungry:
Use Xilisoft iPod Video Converter if you want to:
[*]Convert various video file formats to MP4
[*]Convert most audio file formats to MP3
[*]Extract audio from video file and save to MP3
[*]Encode several files simultaneously
[*]Pause encoding process to run other CPU time consuming programs at any time
Supported file formats:
Video:
[*]MPEG(mpg, mpeg, dat, vob); WMV; ASF; AVI; QuichTime(mov, qt); MPEG4(mp4); 3GP; DV(dv,
dif); Real Video(rm); Animated GIF(gif - decoding only); Macromedia Flash(swf - decoding
audio only);
Audio:
[*]MPEG Audio(mp2, mp3); WMA; WAV; AU; MPEG4 Audio(m4a); Real Audio(ra); OGG; AAC; Raw
AC3(ac3); NUT Open Container Format(nut);
To convert DVD's to an iPod friendly video format:
Use Xilisoft DVD to iPod V4:
[*]Just pop the DVD in your drive select compression variables (default settings work well) and sit back!
All these products are available on a "try before you buy basis", yes there are applications for XP which are free but and may work just as well but I have converted many hours of video for my iPod without hassle using the Xilisoft products (no I don't work for them!). Check there web site HERE
MB67

[SLVD] MySQL Query Browser (1.2.12) hangs when changing schma/database

After a rather big upgrade yesterday (see paste below) I have got a problem with MySQL query browser which is found in package mysql-gui-tools. Everything else seems to be okay, but after upgrading mysql-gui-tools from 5.0r12-3 to 5.0r14-1 (..and now, after another update, its at 5.0r14-2) it is no longer able to refresh schema/databases. Every time I try to change/refresh schema in the schema menu to the right the program hangs and I have to kill it. A refresh icon appears as normal to the left of the schema I'm trying to refresh, but that icon too has frozen. I am however able to execute normal SELECT queries etc if I write the full "path" to the table in the SQL query, but when I try a USE query the same thing happens.
I have done some searching on the Internet about this and found this thread to be interesting. Too bad it's from July 2007..
I tried to downgrade to the old version of query browser, but then I got this problem:
/usr/bin/mysql-query-browser-bin: error while loading shared libraries: libmysqlclient_r.so.15: cannot open shared object file: No such file or directory
..So I guess theres a dependency problem here with the old version.
Has anyone else got any problem with the MySQL Query Browser after upgrade or has any ideas for a solution?
Log from pacman:
[2009-04-12 13:52] synchronizing package lists
[2009-04-12 13:52] starting full system upgrade
[2009-04-12 13:55] upgraded xf86-input-evdev (2.1.2-1 -> 2.2.1-1)
[2009-04-12 13:55] upgraded xorg-server (1.5.3-5 -> 1.6.0-3)
[2009-04-12 13:56] synchronizing package lists
[2009-04-12 13:56] starting full system upgrade
[2009-04-12 13:56] upgraded glib2 (2.20.0-1 -> 2.20.1-1)
[2009-04-12 13:56] upgraded libcap (1.10-2 -> 2.16-3)
[2009-04-12 13:56] upgraded avahi (0.6.24-1 -> 0.6.24-3)
[2009-04-12 13:56] upgraded cdrkit (1.1.9-1 -> 1.1.9-2)
[2009-04-12 13:56]
[2009-04-12 13:56] >>> Deluge's daemon is running with the "deluge" user. The default download directory is /srv/deluge/
[2009-04-12 13:56]
[2009-04-12 13:56] upgraded deluge (1.1.5-1 -> 1.1.6-3)
[2009-04-12 13:56] upgraded jack-audio-connection-kit (0.109.2-2 -> 0.116.2-1)
[2009-04-12 13:56] upgraded gstreamer0.10-bad-plugins (0.10.11-2 -> 0.10.11-3)
[2009-04-12 13:56] upgraded hdparm (9.12-1 -> 9.14-1)
[2009-04-12 13:56] upgraded iptables (1.4.2-1 -> 1.4.3.1-1)
[2009-04-12 13:56] upgraded kbproto (1.0.3-1 -> 1.0.3-2)
[2009-04-12 13:57] upgraded kdelibs (4.2.2-3 -> 4.2.2-4)
[2009-04-12 13:57] upgraded kernel26-firmware (2.6.28-1 -> 2.6.29-1)
[2009-04-12 13:59] >>> Updating module dependencies. Please wait ...
[2009-04-12 13:59] >>> MKINITCPIO SETUP
[2009-04-12 13:59] >>> ----------------
[2009-04-12 13:59] >>> If you use LVM2, Encrypted root or software RAID,
[2009-04-12 13:59] >>> Ensure you enable support in /etc/mkinitcpio.conf .
[2009-04-12 13:59] >>> More information about mkinitcpio setup can be found here:
[2009-04-12 13:59] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
[2009-04-12 13:59]
[2009-04-12 13:59] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2009-04-12 13:59] ==> Building image "default"
[2009-04-12 13:59] ==> Running command: /sbin/mkinitcpio -k 2.6.29-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
[2009-04-12 13:59] :: Begin dry run
[2009-04-12 13:59] :: Parsing hook [base]
[2009-04-12 13:59] :: Parsing hook [udev]
[2009-04-12 13:59] :: Parsing hook [autodetect]
[2009-04-12 13:59] :: Parsing hook [pata]
[2009-04-12 13:59] :: Parsing hook [scsi]
[2009-04-12 13:59] :: Parsing hook [sata]
[2009-04-12 13:59] :: Parsing hook [usbinput]
[2009-04-12 13:59] :: Parsing hook [keymap]
[2009-04-12 13:59] :: Parsing hook [filesystems]
[2009-04-12 13:59] :: Generating module dependencies
[2009-04-12 13:59] :: Generating image '/boot/kernel26.img'...SUCCESS
[2009-04-12 13:59] ==> SUCCESS
[2009-04-12 13:59] ==> Building image "fallback"
[2009-04-12 13:59] ==> Running command: /sbin/mkinitcpio -k 2.6.29-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
[2009-04-12 13:59] :: Begin dry run
[2009-04-12 13:59] :: Parsing hook [base]
[2009-04-12 13:59] :: Parsing hook [udev]
[2009-04-12 13:59] :: Parsing hook [pata]
[2009-04-12 13:59] :: Parsing hook [scsi]
[2009-04-12 13:59] :: Parsing hook [sata]
[2009-04-12 13:59] :: Parsing hook [usbinput]
[2009-04-12 13:59] :: Parsing hook [keymap]
[2009-04-12 13:59] :: Parsing hook [filesystems]
[2009-04-12 13:59] :: Generating module dependencies
[2009-04-12 14:00] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
[2009-04-12 14:00] ==> SUCCESS
[2009-04-12 14:00] upgraded kernel26 (2.6.28.8-1 -> 2.6.29.1-3)
[2009-04-12 14:00] upgraded klibc-udev (140-1 -> 141-1)
[2009-04-12 14:00] upgraded libavc1394 (0.5.3-1 -> 0.5.3-2)
[2009-04-12 14:00] upgraded libcddb (1.3.0-3 -> 1.3.2-1)
[2009-04-12 14:00] upgraded libdatrie (0.1.2-1 -> 0.2.1-1)
[2009-04-12 14:00] upgraded libdrm (2.3.1-3 -> 2.4.9-1)
[2009-04-12 14:00] upgraded libdvdread (0.9.7-1 -> 0.9.7-2)
[2009-04-12 14:00] upgraded libfontenc (1.0.4-1 -> 1.0.4-2)
[2009-04-12 14:00] upgraded libid3tag (0.15.1b-2 -> 0.15.1b-3)
[2009-04-12 14:00] upgraded libmatroska (0.8.1-1 -> 0.8.1-2)
[2009-04-12 14:00] upgraded libmpd (0.16.1-1 -> 0.18.0-1)
[2009-04-12 14:00] upgraded libmysqlclient (5.0.77-1 -> 5.1.33-1)
[2009-04-12 14:00] upgraded libogg (1.1.3-1 -> 1.1.3-2)
[2009-04-12 14:00] upgraded libsamplerate (0.1.6-1 -> 0.1.7-1)
[2009-04-12 14:00] upgraded libthai (0.1.9-1 -> 0.1.11-1)
[2009-04-12 14:00] upgraded libx11 (1.2-1 -> 1.2.1-1)
[2009-04-12 14:00] installed libftdi (0.15-1)
[2009-04-12 14:00] upgraded lirc-utils (0.8.4-1 -> 0.8.5pre2-1)
[2009-04-12 14:00] upgraded m4 (1.4.12-1 -> 1.4.13-1)
[2009-04-12 14:00] upgraded man-db (2.5.4-2 -> 2.5.5-1)
[2009-04-12 14:00] upgraded man-pages (3.19-1 -> 3.20-1)
[2009-04-12 14:00] upgraded nvidia-utils (180.29-3 -> 180.44-1)
[2009-04-12 14:00] installed dri2proto (1.99.3-1)
[2009-04-12 14:01] upgraded mesa (7.2-1 -> 7.4-1)
[2009-04-12 14:01] upgraded mpfr (2.3.2-2 -> 2.4.1-1)
[2009-04-12 14:01] upgraded mpg123 (1.7.1-4 -> 1.7.2-1)
[2009-04-12 14:01] upgraded mysql-clients (5.0.77-1 -> 5.1.33-1)
[2009-04-12 14:01] upgraded mysql (5.0.77-3 -> 5.1.33-1)
[2009-04-12 14:01] upgraded mysql-gui-tools (5.0r12-3 -> 5.0r14-1)
[2009-04-12 14:01] In order to use the new nvidia module, exit Xserver and unload it manually.
[2009-04-12 14:01] upgraded nvidia (180.29-3 -> 180.44-1)
[2009-04-12 14:01] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
[2009-04-12 14:01] upgraded pacman-mirrorlist (20090108-1 -> 20090405-1)
[2009-04-12 14:01] upgraded pango (1.24.0-1 -> 1.24.0-2)
[2009-04-12 14:01] upgraded php (5.2.9-2 -> 5.2.9-3)
[2009-04-12 14:01] upgraded pm-utils (1.2.4-3 -> 1.2.5-1)
[2009-04-12 14:01] installed perl-xyne-common (0.01-5)
[2009-04-12 14:01] installed perl-html-tagset (3.20-1)
[2009-04-12 14:01] installed perl-html-parser (3.60-1)
[2009-04-12 14:01] installed perl-libwww (5.825-1)
[2009-04-12 14:01] installed perl-xyne-arch (0.03-5)
[2009-04-12 14:01] ######################
[2009-04-12 14:01] ## IMPORTANT NOTICE ##
[2009-04-12 14:01] ######################
[2009-04-12 14:01] Powerpill options and configuration file syntax have changed with
[2009-04-12 14:01] version 16.0. Please remove old configuration files and use the
[2009-04-12 14:01] default configuration file at /etc/powerpill.conf as a template for new
[2009-04-12 14:01] ones. Please see the man page for information on the command-line options.
[2009-04-12 14:01] upgraded powerpill (15.12-1 -> 16.0-5)
[2009-04-12 14:01] upgraded python-numpy (1.2.1-4 -> 1.3.0-1)
[2009-04-12 14:02] upgraded qt (4.5.0-3 -> 4.5.0-4)
[2009-04-12 14:02] upgraded qt3 (3.3.8-9 -> 3.3.8-10)
[2009-04-12 14:02] upgraded redland (1.0.8-1 -> 1.0.8-3)
[2009-04-12 14:02] upgraded tdb (3.3.1-1 -> 3.3.3-1)
[2009-04-12 14:02] upgraded smbclient (3.3.1-1 -> 3.3.3-1)
[2009-04-12 14:02] upgraded subversion (1.6.0-2 -> 1.6.1-2)
[2009-04-12 14:02] upgraded syslog-ng (3.0.1-4 -> 3.0.1-6)
[2009-04-12 14:02] upgraded tzdata (2009d-1 -> 2009e-1)
[2009-04-12 14:02] upgraded udev (140-2 -> 141-1)
[2009-04-12 14:02] upgraded xf86-input-keyboard (1.3.2-1 -> 1.3.2-2)
[2009-04-12 14:02] upgraded xf86-input-mouse (1.3.0-1 -> 1.4.0-2)
[2009-04-12 14:02] upgraded xf86-video-vesa (2.1.0-1 -> 2.2.0-1)
[2009-04-12 14:02] upgraded xfce4-mpc-plugin (0.3.3-2 -> 0.3.3-3)
[2009-04-12 14:02] upgraded xorg-server-utils (7.4-3 -> 7.4-4)
[2009-04-12 14:02] upgraded xorg-utils (7.4-2 -> 7.4-3)
Last edited by siaco (2009-04-14 21:42:10)

I found the error on this. In the current PGKBUILD found in AUR, the patch mysql-gui-tools.chema_change_freeze_bug.patch is no longer applied.
I downloaded all related files to this package and built it myself now, with some changes to PGKBUILD and the mysql-gui-tools.chema_change_freeze_bug.patch. It works again :-)
New PGKBUILD:
# $Id: PKGBUILD,v 1.14 2009/04/12 11:52:45 dsa Exp $
# Maintainer: Douglas Soares de Andrade <[email protected]>
# Contributor: Vinay S Shastry <[email protected]>
pkgname=mysql-gui-tools
pkgver=5.0r14
pkgrel=2
arch=('i686' 'x86_64')
pkgdesc="Set of programs to manage and interact with a MySQL server."
url="http://www.mysql.com/products/tools/"
license=('GPL')
source=(http://mirrors.uol.com.br/pub/mysql/Downloads/MySQLGUITools/$pkgname-$pkgver.tar.gz
bad-char.patch
mysql-gui-tools-sigc_2.1.1_api_fixes.diff
mysql-gui-tools-5.0_p12-deprecated-gtk+-api.patch
mysql-gui-tools-gcc43.patch
mysql-gui-tools.chema_change_freeze_bug.patch)
depends=('gtkmm' 'gtkhtml' 'libmysqlclient' 'pcre')
replaces=('mysql-administrator' 'mysql-query-browser')
conflicts=('mysql-administrator' 'mysql-query-browser')
provides=('mysql-gui-common' 'mysql-administrator' 'mysql-query-browser')
makedepends=('pkgconfig' 'lua' 'libxml2' 'libgnomeprint')
options=('!makeflags')
build() {
cd $startdir/src/$pkgname-$pkgver
# Patch from mysql.com to fix the freeze when selecting a schema
patch -p1 < ../mysql-gui-tools.chema_change_freeze_bug.patch || return 1
# Patch to make 5.0r14 compile
patch -Np1 < $startdir/src/bad-char.patch
patch -Np1 < $startdir/src/mysql-gui-tools-sigc_2.1.1_api_fixes.diff
patch -Np1 < $startdir/src/mysql-gui-tools-gcc43.patch
patch -Np0 < $startdir/src/mysql-gui-tools-5.0_p12-deprecated-gtk+-api.patch
cd $startdir/src/$pkgname-$pkgver/common
sh autogen.sh
./configure --prefix=/usr --datarootdir=/usr/share --with-gtkhtml=libgtkhtml-3.14 || return 1
make || return 1
make DESTDIR=$startdir/pkg install || return 1
cd ..
cp -R common mysql-gui-common
cd $startdir/src/$pkgname-$pkgver/administrator
sh autogen.sh
./configure --prefix=/usr --datarootdir=/usr/share --with-gtkhtml=libgtkhtml-3.14 || return 1
make || return 1
make DESTDIR=$startdir/pkg install || return 1
cd $startdir/src/$pkgname-$pkgver/query-browser
sh autogen.sh
./configure --prefix=/usr --datarootdir=/usr/share --with-gtkhtml=libgtkhtml-3.14 || return 1
make CFLAGS="${CFLAGS} -D_GNU_SOURCE" || return 1
make DESTDIR=$startdir/pkg install || return 1
#cd $startdir/src/$pkgname-$pkgver/mysql-workbench
#patch -p1 < ../../mysql-gui-tools-5.0_p12-workbench-lua.patch
#./configure --prefix=/usr --with-gtkhtml=libgtkhtml-3.14 || return 1
#make || return 1
#make DESTDIR=$startdir/pkg install
# Some adjusts to make mysql-workbench run
#cd $startdir/pkg/usr/bin
#mv mysql-workbench mysql-wb
#mv mysql-workbench-bin mysql-wb-bin
#install -m755 $startdir/src/mysql-workbench.sh mysql-workbench
#rm -rf $startdir/pkg/usr/lib/
# Fixed startup scripts
install -m755 $startdir/mysql-administrator $pkgdir/usr/bin
install -m755 $startdir/mysql-query-browser $pkgdir/usr/bin
md5sums=('b8efefbf20b7264c8f3afd34424467d7'
'4279c75bb5e6c2bfcb16c98817d55b80'
'4625629385142862cd01d37f814d5e80'
'33205d45329ab4fa4096b6b298a60b2c'
'1368384dac87bc0a64adb774ab2e6cbd'
'2ff840932405f7a6a6863f633a639fe9')
New mysql-gui-tools.chema_change_freeze_bug.patch: (only changes to paths in file. Don't know if this was really needed, but I belive so.)
diff -ruN mysql-gui-tools-5.0r11.ORIG/query-browser/source/linux/MQQueryDispatcher.cc mysql-gui-tools-5.0r11/query-browser/source/linux/MQQueryDispatcher.cc
--- mysql-gui-tools-5.0r11.ORIG/query-browser/source/linux/MQQueryDispatcher.cc 2007-02-21 01:31:19.000000000 +0000
+++ mysql-gui-tools-5.0r11/query-browser/source/linux/MQQueryDispatcher.cc 2007-11-09 15:31:38.000000000 +0000
@@ -558,8 +558,8 @@
Gtk::Main::instance()->run();
- while(!req->is_complete())
+// while(!req->is_complete())
+// ;
return sps;
I hope this helps anyone else who needs to fix this!

Iphoto hangs when changing layout of cards

Hi,
I create a card with some pictures in it. When I change the layout all pictures are gone.
Now I have to exit iphoto ohterwise it hangs.
Can someone help?
Sbroesamle

There seems to be a bug with iPhoto 8.1.2 and Mavericks 10.9.2 on some machines. Report your problem to Apple via http://www.apple.com/feedback/iphoto.html. However, since iPhoto is up to 9.5.1 now I doubt if there will be any effort put in by Apple for that version of iPhoto.
You can upgrade to iPhoto 9.5.1 via the App Store but it will be a paid upgrade.
OT

Score Window: Thru Instrument no longer changes when changing tracks

Today is my 8th day working in the score window and all of the sudden the thru instrument no longer changes to the track (stave) selected in the score window.
What button/key command did I press and how do I get the previous behaviour back?

some of theswe 'inconsistencies' are there for a reason:
- because that is the way the program evolved
- because they are not inconsistencies on another level or work flow.
also you should be aware that logics philsophy is to be customizable. in general it is almost always possible to set something up so that it behave you would like or expect it to. there problems inherent with this kind of philosophy, but it is what makes logic unique and very flexible.
i would strongly advise you to start perusing the ley command list at every possible moment. reassign key commands so that they behave more consistently for you. for example i have developed my own heirarchy of key commands:
- single strokes for all the most commonly invoked key commands and opening of editors.
- any other editor or subeditor i will use the 'shift' modifier (ie for me shift means open...)
- then complex modifiers for actions that are quite drastic, such as merge etc.
i try to keep all KCs relevant to their function...so for example
c = convert
m = mute
q = open event editor (ok not that one so much)
finally, when in doubt customize, customize, customize.

Gnome hangs when changing theme [SOLVED]

Hey guys,
Don't know if anyone had this problem of if its been posted before so anyways .....
I recently installed Voodoo with kde, gnome & xfce.
My main desktop is KDE but I do use GNOME & XFCE occasionally.
When on KDE I like to be able to change my gtk theme so I installed gtk-qt-engine.
After choosing a theme in the GTK-QT-Engine settings box my gtk apps would adjust accordingly and everything would be fine.
However, when I logged into GNOME and tried to change the GNOME theme .... my desktop would freeze
If I did a ctrl+atl+del I would be taken to gdm but would now get .Xsession errors when trying to re-login.
I would have to login back to KDE, delete the gconf directories and only then was I able to log back into GNOME.
Now the reason I could not change the theme in GNOME was coz the gtk-qt-engine program modified my .gtkrc-2.0 .... and this was causing all the hang ups .... pun intended.
So I edited the gtk-qt-engine modified .gtkrc-2.0 file & commented out everything.
After this GNOME works perfectly and changing themes is now a snap
Hope this helps someone.
Cheers,
hack

Thank you! This saved my life! Well, it did not save my life but it was important. I thought my GNOME was borked and ended up deleting every config and re-installing it before I came across this. DOH!

Odd Error When Changing Track T

I am getting the following error when I try to change the tags on some songs:
"The Track Information has been updated in PC Music Library, but not in the audio file, because the file may be in use, or the file is marked as read-only."
For some reason, the Artist, Album, and Genre are (Unknown) on maybe ten tracks. When I change any one of them I get the error.
I am using Creative MediaSource, (because I am too dense to figure out MP3 Library) as I want to update to the newest firmware, which will format my Touch again.
In Windows, the files do not show the read-only box checked.
It would not be a huge deal to just re-rip the songs, but does anyone know why this might happen? I want to prevent it in the future.
Thanks,
Eric

Have you downloaded and installed the latest MediaSource v3.30.2? If you have already done so, and you are sure that the files are not read-only and not in use, I am interested to see the file because I think that the file may have a corrupted tag. If you don't mind, you can send one or two of the "problematic" files to me at:
[email][email protected]][email protected][/url]

My iPod Video hangs when changing track

Similar Messages

Maybe you are looking for