My ipod video, videos show but no sound...

well i just got an ipod video and i uploaded a couple of videos into it, they look great. however no their is no sound. i dont know what is going on, what can i do about it?

Welcome to Apple Discussions!
Were these videos converted? If so...
This is most likely because the videos are muxed. See this for more info...
iPod plays video but not audio of some exported files (Muxed Files)
You would have to use a converter that supports muxed videos, such as...
MPEG Streamclip
btabz

Similar Messages

Video Controls Shows but No Video

I have a video that I uploaded and the controls show, but not
the video. It has green lines going across the controls like it is
loading, but it never comes up.
Here is a link so You can see the issue:
Link
to Issue
Thanks in advance for any help!

Aghh... Yes I did, but when you said that it sparked a
thought in my head that fixed it. I added the MIME type to IIS and
it worked. Thank you!

HT5517 video is working but no sound in airplay

I have an Apple Tv both 2nd and 3rd generations. My vidoe is working but no sound when trying to play a video from my Iphone. I use Airport express for wi-fi. I am able to do everything else with Apple TV.

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    1.    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    2.    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    3.    Restart the Apple TV (Settings > General > Restart).
    4.    Restart the Apple TV by removing ALL the cables for 30 seconds.
    5.    Restart your router.
    6.    Restart your mobile device.

How do I use my web cam to record audio and video? I can get the video to work but no sound.

I want to record both audio and video at the same time. The video works fine but not the audio. I do use Skype without any problems using both.

PwmBoat,
This made me smile, because things like this do make me smile... I never make videos on YouCam, but I did this time, so I could test this one out.
You did not say what webcam software you are using...
======================================================================
Video and audio recording works on YouCam V3.5.1.4606
Make sure you have turned on a working microphone in Settings:
YouCam > Right-Side Settings >
Right-Side, Lower-Right, Select a working Microphone from the Drop down list
AND
CHECK "Capture with audio"
OK
You can also buy (for $38 US) YouCam 5.0 from the Cyberlink.com website and it has audio/video and all sorts of other goodies, too. (They have 3.x as well, but why buy what HP already gives you?)
==========================================================================
I hope this helps!
We work hard to help!
Whenever you see a Helpful Post - Click the Kudos Star on the Left as Thanks!
Did this Post solve your problem? Mark it “Accept as Solution”!
Note: You can find the “Accept as Solution” box on threads started by you.
2012 Year of the Dragon!
Kind Regards,
Dragon-Fur

Connected ipod to tv, picture but no sound

i have a 30GB and i'm connecting to my tv witha 3rd party set of RCA cables i can see picture but no sound. don't know how to fix, did i do something wrong when i converted files or what? help, please

Do you have to play them online
Yes; if a game does not require a web connection after it is loaded, you can go on playing it after moving out of range of the hotspot.
(31620)

Converting video with iTuns - but the sound disappered...

i converted vidoes from my last trip and then the sound was gone... the videos work on the iPod and on the iTunes but with no sound...
any ideas?

Your source video file is probably muxed.
Neither QT Pro or iTunes has the ability to successfully encode a muxed video file with audio. You'll end up with video and no audio.
You'll need to use some other third-party software to do the conversion. There's a handful of software available. Just search the forums and you'll find many titles mentioned.
Try MPEG Streamclip.

I can import video into iMovie but the sound does not come with it.

I tried using a digitizer with my Macbook Pro that worked very well with my G5 tower for the past 6 years.....I can see the video but get no sound. Any issues anybody can think of? I have tried switching cables, etc. I am using a firewire connection running from a VCR. It also does the same thing with a PowerPC Macbook Pro.

I had a feeling that was it and found the website....it said would not work with Snow Leopard or even Panther. Thanks though for taking the time to help.
Jack

Captivate video pauses slide but not sound

I have created a captivate video and as it tries to transition from slide 1 to slide 2 (or any slide for that matter) the pause button goes from || to |> (pause to play). I never push the button and I don't have any transitions or anything that should be pausing the movie. The odd thing is that the sound continues playing while the visual remains static.
Help?

Just solved it. I had some transparent buttons that needed some settings changed.
See image:

I've completed my video slide show but there are vertical lines 6.0.3

I used overlap transition between all still photos. I noticed that the resolution goes down to 117k (can this be increased?) when I bring in the large mb stills. Everything is smooth but the lines. I have created this over and over. Ultimately I want to create an instant play DVD but have trouble with iDVD is forcing me to use a lame title page with stupid music. PLEASE HELP!!

Is the problem occurring in iMovie or iDVD?
If iMovie, give this basic remedy a try. Quit iMovie and delete your iMovie preferences. To do this, go to your username> library> preferences> com.apple.imovie.plist. Delete this file. Then reopen iMovie; it will create a new preference file with all of the default settings.
If iDVD, do the following for troubleshooting purposes. While working on your project in iDVD, create a disk image. Go to File>Save as disk image. This will create a file that can be viewed on your computer's DVD player. You will be able to see just how your project will work when viewed on a regular DVD player. You will be able to catch errors and correct them before burning and possibly wasting a disk. If the disk image plays correctly, then you know that the encoding is being done correctly. This would point to problems with the burn process. If there are problems with the disk image, then the issue is with encoding.
Message was edited by: Glo H

How do I get photoshop cs10 on a windows 7 laptop after a wizard doctor download the officejet 7610 all-in-one is not printing showing i need to load paper but i've done as the person in the video is showing but it's stll not resolving?

HOW AFTER A DOWNLOAD OF A WIZARD DOCTOR FOR THE OFFICEJET 2710 TO RESOLVE NO PRINTING OR SCANNING AND FOLLOWING THE INSTRUCTIONS ON THE LED DEMO TO LOAD THE PAPER WHAT CAN i DO?

Dennis,
what has that go to do with Photoshop? If you can't print on an HP 7610 no matter what you may need to print it is a legitimate question. Yes? I guess you've nothing to offer in terms of a printing solution.
No caps as far as I can see from the full threads. So no shouting. Each time I asked the question the reply from the monitor was that I didn't put it in the form of a question. Assuming that the monitor was saying re-word it and send it again. So I did. Not realizing that each time it was a different post.
Mark

Slide show but no sound

<pre><i>Locking duplicate thread.
Please continue here: [[/questions/972218]]
</i></pre>
It does not have sound. It also takes a very long time to open a link. Most of the time the little timer just runs fir ever until you click on it then you see a play button. After clicking on play, the slide show starts but there is no sound. How do I address this issue for a Galaxy Note 10.1 on 4.1.2?

I don't have a tablet, but perhaps the same issue occurs on a phone. Could you provide a URL for the problem page so a volunteer can take a look?

Ipod plays when docked but no sound from headset or when not docked

My Ipod plays only when docked. No sound through headset or when not on docking station

Try the following to eliminate a software problem:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If still a problem that indicates a hardware problem with the iPod. An appointment at the genius Bar of an Apple store is in order.

Ipod nano 3rd gen. doesnt have sound during videos

i upload videos into itunes and they play fine, with sound. after converting to ipod format the sound is lost. the video is fine, but the sound is either absent or loud crackling. help please!

Welcome to Apple Discussions!
If the sound is absent, it is probably because it is muxed, or the video and audio are all on one track. If you open the video in QuickTime Player, and go under the Window menu to Show Movie Inspector. In the Format line, if you see anything like, "MPEG1 Muxed", or the word 'Muxed' at all, you will need to use a program to 'demux' it.
There are programs such as MPEG Streamclip, available for download at [http://www.squared5.com/svideo/mpeg-streamclip-win.html] that can demux audio. Under the File Menu, there are options to demux it, or save as MPEG-4.
If you don't like that, you can use VLC Media Player [www.videolan.org/vlc] to convert. When you open a file, click Streaming/Saving Options, and save as an MP4.
Sorry, but I don't know how to help you with crackling, but following the same directions as above may help. Please let me know. I'll search around to see if I can find anything about that.

Video randomly pauses, but sound continues

I have an iPod Touch 32GB 3rd Gen. I have a problem where videos sometimes pause, but the sound keeps playing. It can take anywhere from 20 seconds to a minute before the video comes back.
This is happening with both podcasts and videos I've converted from DVD movies to mp4 using HandBrake.
Any thoughts?

Hello,
I was wondering if you ever found out what the cause of this was? I'm having the same issue now. Using Handbreak etc.
It worked on my old iPod Touch but this new 32GB one is starting with a pause and then has random or systematic stops, can't quite figure it out yet. Any solution you found that worked?
Thanks

Video but no sound on YouTube

Running the newest version of FF, Windows XP. Everything was working beautifully until I downloaded the ActiveX plugin when prompted a few days ago. Then the sound on YouTube got borked--I can see the videos just fine, but no sound at all.
I've tried uninstalling and reinstalling Flash, the Active X plugin, and Shockwave, to no avail. Can someone explain suggestions to someone who is in no way a computer person? Thank you!

Hello, I am not familiar with FF, using IE6. But what caught my eye is you said you downloaded the active x plugin "when prompted"
That is how I came to know there even was a F.P.10 update, a window popped up and said it was availabe and did I want to install now,
later or remind me later. I said, sure, install now. LOL I have since resolved my problem.
I know on the Adobe site, there is a download and install for Windows and one for FF. Do you think the "prompt" installed on IE? I wouldn't think so, but it's a thought. I know you can switch back and forth from FF to IE
Also it might be a good idea to go to www.adobe.com/software/flash/about and Adobe will tell you if you have installed F.P. & they will tell you the version as well.
Like I said, not familiar with FF, but with IE, I had to go into manage add ons & update the active x of Shockwave Flash & Reboot.

My ipod video, videos show but no sound...

Similar Messages

Maybe you are looking for