My iPOd was working fine until last night. Today, it has not updating email
My iPOd touch was working fine last night. Today it has not updated email. When I try to send an email it telsl me that the username or password is incorrect. I have veryfied both hundreds of times and they are correct. It actually allows me to send emails but it has not updated the mailboxes.
Hi jaded99, Welcome to discussions, I trust you found the correct iPod forum if not here is a link. Bob :~))
http://discussions.apple.com/category.jspa?categoryID=146
Similar Messages
-
Can not use my account, telling me the security code on my credit card is wrong, just update this a few weeks ago, was working fine until last night.
Take a look here:
http://support.apple.com/kb/TS1646
If that doesn't help, go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards. -
My iPod was working fine until I finally
My iPod was working fine until I finally decided to update the software. After i did this, it told me to update my firmware by plugging it in. I did, and then when I unplugged it later on, every song on my iPod was gone. A few days later, I plugged the iPod into my computer and all the songs magically came back on it, even the ones that were not backed up on the computer I plugged it into. It worked fine for a couple of days, but this morning when I tried to play a song, it kept lagging and would struggle, making some clicking sounds (not continuous ones like when a harddrive crashes, just occasional ones like it was having trouble reading), so I reset it. When I started up again, I got the sad iPod icon. I have since tried everything in every relevant support article I could find. I tried the 5 R's, and I also put it into disk mode (which it finally did, after much lagging), but still my computer would not recognize it, even after reinstalling iTunes.
Basically, what it comes down to, is I cannot restore it, because I cannot get my computer to recognize it. It has always worked fine on this computer -- in fact, I never had a single problem with my iPod until I tried to update the software. I guess I learned, 'if it ain't broke, don't fix it' - but how can I ever get my iPod to work again? Please help me!Hi jaded99, Welcome to discussions, I trust you found the correct iPod forum if not here is a link. Bob :~))
http://discussions.apple.com/category.jspa?categoryID=146 -
My iPad was working fine until Tues. Night. I went to go on facebook and it shows a white page like it is coming on the it goes back to the home page. I have turned it off, deleted Facebook and put it back on but it still does the same thing. What can I do?
Morning DeeHutton,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Best of luck,
Mario -
CS5 Premiere was working perfectly until last night... Now not responding. Any solutions?
Hey all,
So, for the past month I've had no problems editing with premiere. Then last night while editing on a much smaller project than normal, (same file types) the program started slowing down, considerably. Now, any keystroke puts the program into "not responding" and it takes minutes to select clips. I've restarted the computer, program, and looked at my cpu usage in the task manager. While the program is running, and then not responding, the computer is not stressing at all, 14% cpu, 31% memory.
Im running an i7 [email protected], 8gb ram, with ati hd 5770.
What i dont understand is why I've had no issues until last night, and now I cant use the product at all. My After Effects still works fine at least.
Any one else have this issue or know of a fix?Along with TClark's questions, try doing a New Project, and test it out.
There have been reports of Project files bloating, and then not working properly. Adobe is working on that. Seems that many/most/all of those came with CS4 Projects converting to CS5. Was there any CS4 to CS5 conversion anywhere in this workflow?
Good luck,
Hunt -
I was just using my iPod put it down for about an hour and then suddenly the screen wouldn't turn on and no sense of life at all. It didn't help that my home button is broken river but this is not normal also I have never dropped it.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Is there anything that i could do to fix this?
Try in order:
- Resetting the iPOd:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restoring the iPod from backup via iTunes on your computer
- Restoring the iPod to factory defaults/new iPod via iTunes.
- Make an appointment at the Genius Bar of an Apple store. -
I did an update on my ipod touch, now it says it is in restore mode. i don't want to lose my info, but my ipod won't do anything now. thanks itunes; it was working fine until i did the update you said i needed. what do i do now??????
No one here said anything about an update or your device needing it.
FYI, you are not addressing Apple here, we are all users like yourself.
If the device is in recovery mode, the only option is to restore it. All data on the device is gone. This should not be an issue if the device has been used as designed and regularly synced/backed up. -
my ipad mini was working fine until i installed this last update, now it wants me to reset it and it want let me , What do I need to do?
Try resetting the phone:
Press the Sleep/Wake button & Home button at the same time, keep pressing until you see the Apple logo, then release. -
my ipod 4g was working fine until i locked the screen but when i tried to turn it back on the screen stays black and its been 3 days. Does anyone know how i could fix this?
- Charge the iPod for half an hour. Then reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- if still not working, connect to your computer. If iTunes sees the iPod, restore the iPod.
- If still problem, place the iPod in recovery mode and then try to restore the iPod. For recovery mod see:
iPhone and iPod touch: Unable to update or restore -
My ipod nano was working fine until i uploaded some new tunes today. It sync properly and once disconnected it just switched off and would not even turn on. I have put it on charge for a few hours but nothing happens, infact the charger is getting hot. Pleaseeeeeeeeeeee help I need my ipod.
The backlight burned out from getting it wet. You will have to replace the screen at a 3rd party shop, buy a screen and replace it yourself, or make a Genius Bar appointment at your nearest Apple Store and do an out-of-warranty replacement for $199 USD.
-
How do I fix my audio/video in iChat 4.0.9? it has worked perfectly until last night.
How do I fix my audio/video in iChat 4.0.9? it has worked perfectly until last night. I have been having video calls iChat with my granddaughter for 4 weeks. All of a sudden last night I wasn't able to complete the video/audio. We were able to iChat with writing. The message I got was to go to connection doctor.
The error log -
2011-04-24 19:33:43 -0400: No data has been received for the last 10 seconds.
Audio channel info: local machine using 10.0.1.2:16402, expecting remote machine to send to 69.138.244.124:58521
Video channel info: local machine using 10.0.1.2:16402, expecting remote machine to send to 69.138.244.124:58521
Every time we tried to connect I got the same error message.
I use an airport extreme - my granddaughter has some kind of wifi - but the error was on my side not hers as she connected to her friends.
Please help.
Thank you.Hi - I have a cable modem from comcast.
I am not sure I understand all your questions, suggestions - so I will copy what I have when I go into the airport utility under internet.
Do you have four tabs (You may have less) I HAVE 4 TABS
In the First tab what does it read at the Bottom ? AT THE BOTTOM OF THE FIRST TAB (INTERNET CONNECTION) IT DOES SAY "SHARE A PUBLIC IP" WHEN I LOOK AT THAT SETTING - I COULD CLICK INSTEAD BRIDGE MODE OFF, OR DISTRIBUTE A RANGE OF IP ADDRESSES. BUT FOR NOW THE ONE THAT IT IS ON IS THE SHARE A PUBLIC IP.
"Share a Public IP" ?
Or "Bridge (Off) Mode" ?
I DON'T UNDERSTAND WHERE TO LOOK FOR THE INFO BELOW. I ALSO HAVE UNDER THE INTERNET CONNECTION TAB - CONNECT USING ETHERNET AND ETHERNET WAN PORT AUTOMATIC (DEFAULT)
THE 2ND TAB IS TCP/IP AND THERE IT LISTS CONFIGURE IPv4: USING DHCP
IP ADDRESS: 69.138.244.124
SUBNET MASK 255.255.248.0
ROUTER ADDRESS 69.138.240.1
DNS SERVER 68.87.73.246 AND 68.87.71.230 (THESE ARE FILLED IN THE BOXES AND NOT CHANGEABLE.
THE 3RD TAB IS DHCP
DHCP BEGINNING ADDRESS 10.0 .1 .2
DHCP ENDING ADDRESS 10.0.1.200
DHCP LEASE IS 1 THEN DAY
4TH TAB NAT
CHECKED IS ENABLE NAT PORT MAPPING PROTOCOL
I HAVE BEEN USING THIS AIRPORT EXTREME FOR AT LEAST ONE YEAR.
THE ONLY DIFFERENT ISSUE IS THAT I HAD BEEN TRAVELING AND USED MY DAUGHTER'S AIRPORT EXTREME LAST WEEK. I HAVE NO IDEA ANY OF THAT INFO - BUT I DO KNOW THAT THE AIRPORT EXTREME LISTED IN THE UTILITY IS THE ONE AT MY HOME THAT I AM WITH NOW.
THANK YOU FOR TAKING THE TIME TO TRY TO HELP ME. I REALLY APPRECIATE IT.
JUDY
Between that drop down and the tabs should be the info on how it connects to the Modem.
It may list that Puiblic IP.
It may list another LAN IP (one from the Modem)
Does it start 192.168....
Or 172.16 (or up to 172.32....)
Or possibly another 10.... number ?
If the modem is issuing IPs to the LAN there are two things that can effect things
One is the fact the computer gets two IPs (even though the mac can only display one)
And If you used Port Forwarding in the Modem the Place (IP/Computer or device) that it was pointing to may not be the Airport Base Station any more. -
i keep the itunes encountered a problem and needs to shut down . it was working fine until after i updated to 10.5 can someone plz help
I did get a "server busy" message when I loaded quicktime, but I'm not sure if it is related or not since I've been seeing that over the last couple of days, I can't remember if it came before iTunes stopped working or not. That message reads "This action cannot be completed because the other program is busy. Choose 'switch to' to activate the busy program and correct the problem." My options then are to choose switch to or retry. When I press "switch to" my Start menu opens, and nothing appears to happen when I select retry.
that's an odd sort of a message (or series of messages).
hmmmmm. let's try an experiment aimed at working out if there's a program interfering with the QuickTime (which is in turn causing grief with your iTunes).
try a selective startup using MSCONFIG, with just the itunes and QuickTime background processes enabled, as per the following document:
Using MSCONFIG to troubleshoot conflicts in Windows
does QT open without the strange message after the selective startup?
does iTunes launch properly? -
my apple tv was working fine untill the AirPlay option disappeared. I haven alterd the settings and have tryed rebooting both iPhone and ipad. I even rebooted the ATV and that disn't work. i am connected to the same network on both devices to. My iPad is up to date but my phone isn't but as I said mirroring and AirPlay worked fine on both devices befor...
Hi F1N5G10,
Thanks for contributing to the Apple Support Communities.
It sounds like you don't have the AirPlay option on your iOS devices. Restarting your Apple TV and iOS devices was a good first step, and you can find some additional tips to guide your troubleshooting at this link:
Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch - Apple Support
Sincerely,
Jeremy -
I am having the same problem that Paul Birgy is having. It was working fine until the update.
I am having the same problem that Paul Birgy is having. I can send email from my program but now the reciever cannot read it. Before the update my emails I sent from my program were readable by the reciever.
I send out invoices from Peachtree Premium Accounting 2005. I click on the email icon on top of page and it goes to Microsoft office outlook 2007. It shows as an attachment and in the message it tells the receiver they need adobe reader installed in their computer to read it. It was all working fine until the last update for adobe reader.
Now they get error message. Adobe Reader could not open "Invoice #106.PDF" because it is either not a supported file type or because the file has been damaged (for example it was sent as an email attachment and wasn't correctly decoded.)
This started March 3, 2010. Since then I have been faxing out of the Peachtree program. That still works fine.
This problem seemed to start right after one of the updates. I was told to try and reinstall Adobe Reader. I have tried that twice and still have the same problem.
To the best of my knowledge I have not had any problems with Peachtree.
Cathy
Date: Tue, 25 May 2010 14:40:25 -0600
From: [email protected]
To: [email protected]
Subject: I am having the same problem that Paul Birgy is having. It was working fine until the update.
Sounds like either
A. Something in your accounting software is corrupting the file or;
B. Something in your email is corrupting the file (some email providors use compression to make the transfer faster which can mess up a PDF).
What hapens when they try and open it? Do they get an error message? If so, what is it (this matters)?
At any rate, it's doubtful that this is a Reader issue but give us some more detail and maybe someone can help here.
>
Maybe you are looking for
-
What all necessary action should i have to take before selling my iphone 3gs?
What all are the necessary steps should i have to take before selling my iphone 3gs??
-
Before I formatted my computer, I had a box that said translation, but now after formatting has disappeared. How do I get back it? m.v.h. Tore == This happened == Every time Firefox opened
-
Hi Can anyone help me? Since upgrading to v6 of the iphone software the other day, all my contacts have gone, and I can't connect to orange contacts restore to get them back, or access my email. Other web pages seem ok. When I try to connect to the
-
Currently we are using P_ORIGIN Authorisation. In this we are using personnel area and Org. Key as restrictions. Org. Key is currently set to be Personnel Subarea. Example- Authorization level: M, R, W Infotype: * Personnel Area:
-
Attaching a picture to a text message
Is it true that you cannot attach a picture to a text message?