My ipod will connect to my computer but not to itunes

i have recently changed my ipod touch 4generation screen. i ahve done this multiple time without a problem and this time was the best ive done. when i plug in my ipod, it shows up in "my computer" but not in Itunes. if the ipod shows on my computer, its not the cord. i tried multiple hard shut downs and they did nothing. i have completely reset the ipod to defualt settings from the general setting in the device twice saving my info in drop box and icloud as back ups but that also did nothing. the ipod works perfectly fine by itself however the camera wont load. also, when i plug the device into my windows computer, even though there are pic and videos; my computer says there arent any. someone please help!!!!!

Go through the troubleshooting steps here:
iOS device not recognized in iTunes for Mac or
iOS device not recognized in iTunes for Windows

Similar Messages

  • My iPod will charge in the computer but not my iPod dock, my sisters iPod dock or the wall charger. My sisters iPod will charge in all and we both have the same sofware and generation. Why won't mine charge?

    My Ipod will charge in the computer but noy my iPod dock, my sisters iPod dock or the wall charger. My sisters iPod will charge in all and we both have the same software and generation. Why won't mine charge?

    Look the dock connector on your iPod. Look for abnormalities like bent or corred contacts, foreign material and cracked/broken plastic.
    Try:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears..
    - Restore from backup
    - Restore to factory settings/new iPod

  • IPod nano recognized in MY Computer but not in iTunes

    My iPod nano is recognized under My Computer but not in iTunes.
    I formaatted the iPod nano as FAT32 using the format option when right-clicking on the drive in My Computer.
    I installed the latest version of iTunes software. I adopted the five R's approach to resolve my issue. I have wanted to restore the iPod but this option is not available in iTunes, since the iPod is not recognised by the software.
    The iPod diagnostics option in iTunes indicates the following:
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Dell Computer Corp. Latitude L400
    iTunes 7.0.2.16
    iPodService 7.0.2.16 is currently running.
    iTunesHelper 7.0.2.16 is currently running.
    Current user is an administrator.
    Connected Storage Devices:
    IDE\DiskIC25N020ATDA04-0______________________DA3OA70A, Bus Type ATA, Bus Address [0,0]
    USBSTOR\DiskApple__iPod___________1.62, Bus Type USB
    USBSTOR\DiskWD_____2500BB_External0602, Bus Type USB
    Universal Serial Bus Controllers:
    NEC PCI to USB Open Host Controller, PCI bus 129, device 0, function 0. Device is working properly.
    NEC PCI to USB Open Host Controller, PCI bus 129, device 0, function 1. Device is working properly.
    Standard Enhanced PCI to USB Host Controller, PCI bus 129, device 0, function 2. Device is working properly.
    Intel(R) 82371AB/EB PCI to USB Universal Host Controller, PCI bus 0, device 7, function 2. Device is working properly.
    No IEEE 1394 Host Controller found.
    Connected Device Information
    ORLAITH'S I (I:\), iPod nano running firmware version 1.1.1
    Serial Number:
    Bus Speed: 61440
    The last connected iPod serial number:
    The iPod Service Logging Information:
    [SERVICE: 0x834,09:19:26 INFO] Started C:\Program Files\iPod\bin\iPodService.exe (Fri Dec 15 09:19:26 2006)
    [SERVICE: 0x834,09:19:26 INFO] ##### iPodService starting as a service, version: 7.0.2.16
    [SERVICE: 0x848,09:19:27 INFO] Got signaled to go ahead... Starting device manager!
    [SERVICE: 0x87C,09:19:27 INFO] Listener Window created
    [SERVICE: 0x87C,09:35:21 INFO] [DevNodesChanged]
    [SERVICE: 0x87C,09:35:22 INFO] [DevNodesChanged]
    [SERVICE: 0x87C,09:35:23 INFO] [DevNodesChanged]
    [SERVICE: 0x87C,09:35:23 INFO] [DevNodesChanged]
    [SERVICE: 0x87C,09:35:23 INFO] [DevNodesChanged]
    [SERVICE: 0x87C,10:15:57 INFO] [DevNodesChanged]
    [SERVICE: 0x87C,10:15:57 INFO] [DevNodesChanged]
    [SERVICE: 0x87C,10:15:57 INFO] [DevNodesChanged]
    [SERVICE: 0x87C,10:15:58 INFO] [InterfaceArrival] \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x87C,10:15:58 INFO] device \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x87C,10:15:58 INFO] device is an iPod
    [SERVICE: 0x87C,10:15:58 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x87C,10:15:58 INFO] [-1] set waiting to mount = 1
    [SERVICE: 0x87C,10:15:58 INFO] [1] Assigning session 0
    [SERVICE: 0x87C,10:15:58 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_objDeviceNameMap
    [SERVICE: 0x87C,10:15:58 INFO] [1] added state machine 1 to m_objDeviceIdMap
    [SERVICE: 0x87C,10:15:58 INFO] [1] added device number 2 to m_objDeviceNumberMap
    [SERVICE: 0x87C,10:15:58 INFO] [1] added device interface "\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_vctDeviceInterfaces
    [SERVICE: 0x87C,10:15:58 INFO] [DevNodesChanged]
    [SERVICE: 0x87C,10:15:58 INFO] [1] input #0 from src #0
    [SERVICE: 0x87C,10:15:58 INFO] [DevNodesChanged]
    [SERVICE: 0x87C,10:15:58 INFO] [1] input #1 from src #0
    [SERVICE: 0x86C,10:15:58 INFO] [1] input #0
    [SERVICE: 0x870,10:15:58 INFO] [1] input #1
    [SERVICE: 0x86C,10:15:58 INFO] [MACHINE 1 INPUT #0] - (HDW) CheckDevNode
    [SERVICE: 0x86C,10:15:58 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x870,10:15:58 INFO] [MACHINE 1 INPUT #1] - (HDW) CheckDevNode
    [SERVICE: 0x870,10:15:58 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x87C,10:16:01 INFO] [SIMULATED VOLUME ARRIVAL] generating volume mount for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x87C,10:16:01 INFO] [VolumeArrive] mask = 0x1FC
    [SERVICE: 0x87C,10:16:01 INFO] looking up device # for \\.\I:
    [SERVICE: 0x87C,10:16:01 INFO] type 0x7 drive 0x2 partition 0x1
    [SERVICE: 0x87C,10:16:01 INFO] iTunes device #2 found with drive letter I, mask 0x100
    [SERVICE: 0x87C,10:16:01 INFO] [1] set waiting to mount = 0
    [SERVICE: 0x87C,10:16:01 INFO] [1] input #2 from src #0
    [SERVICE: 0x87C,10:16:01 INFO] looking up device # for \\.\H:
    [SERVICE: 0x87C,10:16:01 INFO] type 0x7 drive 0x1 partition 0x3
    [SERVICE: 0x87C,10:16:01 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
    [SERVICE: 0x874,10:16:02 INFO] [1] input #2
    [SERVICE: 0x874,10:16:02 INFO] [MACHINE 1 INPUT #2] - (HDW) Volume Mount
    [SERVICE: 0x874,10:16:02 INFO] ** CItunesDevice::HandleHardwareInput()
    [SERVICE: 0x878,10:16:02 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x878,10:16:02 INFO] [First Connect] Creating connect event for device 1
    [SERVICE: 0x878,10:16:02 INFO] [1] set waiting to mount = 1
    [SERVICE: 0x878,10:16:02 INFO] [1] input #3 from src #0
    [SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x86C,10:16:02 INFO] [1] input #3
    [SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\.\G:
    [SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x1 partition 0x2
    [SERVICE: 0x87C,10:16:02 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
    [SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\.\F:
    [SERVICE: 0x87C,10:16:02 INFO] type 0x2 drive 0x0 partition 0xffffffff
    [SERVICE: 0x87C,10:16:02 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
    [SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\.\E:
    [SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x1 partition 0x1
    [SERVICE: 0x87C,10:16:02 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
    [SERVICE: 0x86C,10:16:02 INFO] [MACHINE 1 INPUT #3] - (HDW) Interface Arrival
    [SERVICE: 0x86C,10:16:02 INFO] [1] progress state is 2, Waiting to mount = 1
    [SERVICE: 0x86C,10:16:02 INFO] [1] progress is now 2
    [SERVICE: 0x86C,10:16:02 INFO] [1] progress is now 2
    [SERVICE: 0x86C,10:16:02 INFO] [MACHINE 1 TRANSITION] - {Unknown} ==> {Connected}
    [SERVICE: 0x86C,10:16:02 INFO] [MACHINE 1 ACTIONS] - {Connected}
    [SERVICE: 0x86C,10:16:02 INFO] [1] SCSI Inquiry attempt #0
    [SERVICE: 0x86C,10:16:02 INFO] VendorId: Apple
    [SERVICE: 0x86C,10:16:02 INFO] ProductId: iPod
    [SERVICE: 0x86C,10:16:02 INFO] revision: 1.62
    [SERVICE: 0x86C,10:16:02 INFO] vendor bytes:
    [SERVICE: 0x86C,10:16:02 INFO] 02 01 00 00 00 00 00 00 00 0C 00 06 92 00 00 00 00 00 00 00
    [SERVICE: 0x86C,10:16:02 INFO] [1] firmware version: 1.62 (0x13E)
    [SERVICE: 0x86C,10:16:02 INFO] [1] Power State: Powered
    [SERVICE: 0x86C,10:16:02 INFO] [1] Checkpoint attempt #0
    [SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\.\D:
    [SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x0 partition 0x3
    [SERVICE: 0x87C,10:16:02 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
    [SERVICE: 0x86C,10:16:02 ERROR] Did not find first letter of stage
    [SERVICE: 0x86C,10:16:02 INFO] got HotPlugState 0
    [SERVICE: 0x86C,10:16:02 INFO] [1] serial number 000A270018314842
    [SERVICE: 0x86C,10:16:02 INFO] [1] *** CONNECTED - Sending event out, device session 0.
    [SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x87C,10:16:02 INFO] [SIMULATED VOLUME ARRIVAL] generating volume mount for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x87C,10:16:02 INFO] [VolumeArrive] mask = 0x1FC
    [SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\.\I:
    [SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x2 partition 0x1
    [SERVICE: 0x87C,10:16:02 INFO] iTunes device #2 found with drive letter I, mask 0x100
    [SERVICE: 0x87C,10:16:02 INFO] [1] set waiting to mount = 0
    [SERVICE: 0x87C,10:16:02 INFO] [1] input #4 from src #0
    [SERVICE: 0x870,10:16:02 INFO] [1] input #4
    [SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\.\H:
    [SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x1 partition 0x3
    [SERVICE: 0x87C,10:16:02 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
    [SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x87C,10:16:02 INFO] looking up device # for \\.\G:
    [SERVICE: 0x87C,10:16:02 INFO] type 0x7 drive 0x1 partition 0x2
    [SERVICE: 0x87C,10:16:02 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
    [SERVICE: 0x87C,10:16:03 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x87C,10:16:03 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x87C,10:16:03 INFO] looking up device # for \\.\F:
    [SERVICE: 0x87C,10:16:03 INFO] type 0x2 drive 0x0 partition 0xffffffff
    [SERVICE: 0x87C,10:16:03 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
    [SERVICE: 0x870,10:16:03 INFO] [MACHINE 1 INPUT #4] - (HDW) Volume Mount
    [SERVICE: 0x870,10:16:03 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Mounted}
    [SERVICE: 0xD40,10:16:03 INFO] <0x4> Got Serial #
    [SERVICE: 0x87C,10:16:03 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x87C,10:16:03 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x87C,10:16:03 INFO] looking up device # for \\.\E:
    [SERVICE: 0x87C,10:16:03 INFO] type 0x7 drive 0x1 partition 0x1
    [SERVICE: 0x87C,10:16:03 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
    [SERVICE: 0x870,10:16:03 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x870,10:16:03 INFO] [MACHINE 1 ACTIONS] - {Mounted}
    [SERVICE: 0x870,10:16:03 INFO] [1] progress state is 2, Waiting to mount = 0
    [SERVICE: 0x870,10:16:03 INFO] [1] progress state is 2, Waiting to mount = 0
    [SERVICE: 0xF74,10:16:03 INFO] [1] Progress state is 2, Waiting to disconnect = 0
    [SERVICE: 0xAD8,10:16:03 INFO] Mounted
    [SERVICE: 0xAD8,10:16:03 INFO] [1] already mounted!
    [SERVICE: 0x87C,10:16:03 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x87C,10:16:03 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x87C,10:16:03 INFO] looking up device # for \\.\D:
    [SERVICE: 0x87C,10:16:03 INFO] type 0x7 drive 0x0 partition 0x3
    [SERVICE: 0x87C,10:16:03 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
    [SERVICE: 0x870,10:16:03 ERROR] Did not find first letter of stage
    [SERVICE: 0x870,10:16:03 INFO] got HotPlugState 0
    [SERVICE: 0x870,10:16:03 INFO] [1] OS says filesystem is FAT32
    [SERVICE: 0x870,10:16:03 INFO] File does not exist!
    [SERVICE: 0x870,10:16:03 INFO] [1] iTunes Preference file does not exist!
    [SERVICE: 0x870,10:16:03 INFO] [1] ===== iPod Nano =====
    [SERVICE: 0x870,10:16:03 INFO] [1] progress state is 2, Waiting to mount = 0
    [SERVICE: 0x87C,10:16:03 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x87C,10:16:03 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x87C,10:16:03 INFO] [VolumeArrive] mask = 0x100
    [SERVICE: 0x87C,10:16:03 INFO] looking up device # for \\.\I:
    [SERVICE: 0x87C,10:16:03 INFO] type 0x7 drive 0x2 partition 0x1
    [SERVICE: 0x87C,10:16:03 INFO] iTunes device #2 found with drive letter I, mask 0x100
    [SERVICE: 0x87C,10:16:03 INFO] [1] set waiting to mount = 0
    [SERVICE: 0x87C,10:16:03 INFO] [1] input #5 from src #0
    [SERVICE: 0x878,10:16:03 INFO] [First Connect] Creating mount event for device 1
    [SERVICE: 0x878,10:16:03 INFO] [VolumeArrive] mask = 0x1FC
    [SERVICE: 0x878,10:16:03 INFO] looking up device # for \\.\I:
    [SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x2 partition 0x1
    [SERVICE: 0x878,10:16:03 INFO] iTunes device #2 found with drive letter I, mask 0x100
    [SERVICE: 0x870,10:16:03 INFO] 10:16:3, year 2006, day of yr. 348, GMT offset 0 isDST 0
    [SERVICE: 0x878,10:16:03 INFO] [1] set waiting to mount = 0
    [SERVICE: 0x878,10:16:03 INFO] [1] input #6 from src #0
    [SERVICE: 0x878,10:16:03 INFO] looking up device # for \\.\H:
    [SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x1 partition 0x3
    [SERVICE: 0x878,10:16:03 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
    [SERVICE: 0x870,10:16:03 INFO] [1] progress is now 0
    [SERVICE: 0x87C,10:16:03 INFO] [DevNodesChanged]
    [SERVICE: 0x87C,10:16:03 INFO] [1] input #7 from src #0
    [SERVICE: 0x878,10:16:03 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x878,10:16:03 INFO] looking up device # for \\.\G:
    [SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x1 partition 0x2
    [SERVICE: 0x878,10:16:03 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
    [SERVICE: 0x878,10:16:03 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x878,10:16:03 INFO] looking up device # for \\.\F:
    [SERVICE: 0x878,10:16:03 INFO] type 0x2 drive 0x0 partition 0xffffffff
    [SERVICE: 0x878,10:16:03 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
    [SERVICE: 0x878,10:16:03 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x878,10:16:03 INFO] looking up device # for \\.\E:
    [SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x1 partition 0x1
    [SERVICE: 0x878,10:16:03 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 1
    [SERVICE: 0x878,10:16:03 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x878,10:16:03 INFO] looking up device # for \\.\D:
    [SERVICE: 0x878,10:16:03 INFO] type 0x7 drive 0x0 partition 0x3
    [SERVICE: 0x878,10:16:03 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
    [SERVICE: 0x878,10:16:04 INFO] looking up device # for \\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0x878,10:16:04 INFO] type 0x7 drive 0x2 partition 0x0
    [SERVICE: 0x870,10:16:05 INFO] [1] *** MOUNTED - Sending event out, device session 0.
    [SERVICE: 0x870,10:16:05 INFO] [1] Auto-launch iTunes ENABLED
    [SERVICE: 0x870,10:16:05 INFO] iTunes located at 'C:\Program Files\iTunes\iTunes.exe'
    [SERVICE: 0xAD8,10:16:05 INFO] [1] progress state is 0, Waiting to mount = 0
    [SERVICE: 0x870,10:16:05 INFO] [1] input #5
    [SERVICE: 0x86C,10:16:05 INFO] [1] input #6
    [SERVICE: 0x874,10:16:05 INFO] [1] input #7
    [SERVICE: 0x870,10:16:05 INFO] [MACHINE 1 INPUT #5] - (HDW) Volume Mount
    [SERVICE: 0x870,10:16:05 INFO] ** CItunesDevice::HandleHardwareInput()
    [SERVICE: 0x86C,10:16:05 INFO] [MACHINE 1 INPUT #6] - (HDW) Volume Mount
    [SERVICE: 0x86C,10:16:05 INFO] ** CItunesDevice::HandleHardwareInput()
    [SERVICE: 0x874,10:16:05 INFO] [MACHINE 1 INPUT #7] - (HDW) CheckDevNode
    [SERVICE: 0x874,10:16:05 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple&prod_ipod&rev1.62#000a270018314842&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0x844,10:16:05 INFO] iTunes already running in current session.
    [SERVICE: 0xD40,10:16:05 INFO] <0x4> GetFormatType() returned unknown format 0
    [SERVICE: 0xF74,10:16:05 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0xF74,10:16:05 INFO] Mounted
    [SERVICE: 0xF74,10:16:05 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0xF74,10:16:05 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0x858,10:16:05 INFO] <0x4> COM request for device 1 drive letter - I
    [SERVICE: 0xF74,10:16:05 INFO] Mounted
    [SERVICE: 0xF74,10:16:05 INFO] Device 0 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0xF74,10:16:05 INFO] Device 0 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0xF74,10:16:05 INFO] File does not exist!
    [SERVICE: 0xF74,10:16:05 INFO] [1] CreateFileW error 0x3
    [SERVICE: 0xF74,10:16:05 INFO] [1] WriteNewPrefs FAILED!
    [SERVICE: 0xF74,10:16:05 INFO] [1] ReadDevicePreferences() failed!
    [SERVICE: 0x858,10:56:59 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0x858,10:56:59 INFO] Mounted
    [SERVICE: 0x858,10:56:59 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0x858,10:56:59 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0xCFC,10:56:59 INFO] Mounted
    [SERVICE: 0xCFC,10:56:59 INFO] [1] already mounted!
    [SERVICE: 0xCFC,10:56:59 INFO] [1] progress state is 0, Waiting to mount = 0
    [SERVICE: 0x858,10:56:59 INFO] Mounted
    [SERVICE: 0x858,10:56:59 INFO] Device 0 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0x858,10:56:59 INFO] Device 0 not in intermediate state. It appears to be truly mounted.
    [SERVICE: 0x858,10:56:59 INFO] File does not exist!
    [SERVICE: 0x858,10:56:59 INFO] [1] CreateFileW error 0x3
    [SERVICE: 0x858,10:56:59 INFO] [1] WriteNewPrefs FAILED!
    [SERVICE: 0x858,10:56:59 INFO] [1] ReadDevicePreferences() failed!
    [SERVICE: 0xD68,10:56:59 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0xD68,10:56:59 INFO] Mounted
    [SERVICE: 0xD68,10:56:59 INFO] Device 1 is FAT32 and appears mounted, checking intermediate state...
    [SERVICE: 0xD68,10:56:59 INFO] Device 1 not in intermediate state. It appears to be truly mounted.
    I think a more comprehensive format might solve the problem. Anyone with any ideas.

    see if this helps
    http://docs.info.apple.com/article.html?artnum=93716

  • IPod shuffle appears in My Computer but not in iTunes after upgrade to 8.1

    I recently upgraded to iTunes v.8.1. Now my generation 1 Shuffle shows up in 'My Computer' but not in the iTunes 'devices'? I followed the iTunes 'help' advice - even reloading iTunes but to no avail. Anyone help please?

    hi haptic!
    I had it all working fine until I formatted my pc. Now windows recognizes it but not iTunes or the updater, and I don't get any error message.
    just checking. have you investigated these possibilities yet?
    Strange iPod behavior when Windows confuses iPod with network drive
    iPod for Windows: Fast user switching in Windows XP is not supported
    iPod not recognized and Windows Device Manager is empty
    ... another thing to check if your Device Manager is blank is this possibility:
    No Items Appear in the Device Manager List When You Open It
    otherwise, try steadily working through this document (apologies if you've seen this one already, but there are things in this one that you didn't explicitly mention having tried.)
    EDIT: sorry, got the link wrong first time around ...
    iPod appears in Windows Explorer but does not appear in iTunes
    keep us posted.
    love, b

  • Ipod will sink to my computer but not another computer, ipod will sink to my computer but not another computer

    Today i added some shows and it compleatly deleated my playlists.. they were from my brothers library the songs..but now it will not sink to his computer. but it will to mine. i tride reseting it, and nothing.

    However, you can manage music among different computers.   See:
    Using iPhone, iPad, or iPod with multiple computers

  • My ipod is connected to the computer but not shown in itunes

    so i hooked my ipod nano 4gb to my computer and it says do not disconnect on the screen. also the owner ipod is not showin in itunes player what should i do.

    Have a look at these.
    iPod appears in Windows Explorer but does not appear in iTunes.
    iPod does not appear in iTunes.
    Fast user switching in Windows XP is not supported.
    Strange iPod behavior.

  • My iPod is appering in my computer, but not in iTunes

    I recently installed iTunes 10 and today I installed 10.1, but neither is recognizing my iPod touch. I have tried everything support has sudjected, including reinstalling iTunes twice. Today, I tried what another user had sudjected, by plugging in my iPod while holding down the home button, and this showed the "plug into iTunes" screen like the first time you plug in a new iPod, but about ten minutes later it was back to the charging green battery screen, and still not showing up. Any help would be appreciated, thank you!

    Disconnect any usb devices except keyboard and mouse. Reboot your computer. Turn off all antivirus, spyware, zone alarm, firewall, etc. Then:
    1. Disconnect the USB cable from the iPod touch, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the the iPod touch to turn off.
    * If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    3. While pressing and holding the Home button, reconnect the USB cable to the touch. When you reconnect the USB cable to the touch, the device should power on.
    Note: If you see an image of an empty battery with socket to lightening bolt symbol, let the device charge for at least ten minutes to ensure the battery has some charge and then start with step 2 again.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When a screen with a Usb cord pointing the iTunes symbol appears you can release the Home button.
    5. If necessary, open iTunes. You should see alert text: "iTunes has detected an touch in recovery mode..."
    6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see [this article|http://support.apple.com/kb/TS1495] and its related links.
    Most of the time this should work, although it make take a few attempts. If it doesn't and you can try it on a different computer. Or bring it to an Apple store - I don't know if they charge to restore or not since I've never been to one and am not affiliated with Apple.
    After this, the only other option is [DFU mode restore|http://www.podzombie.com/2010/01/using-dfu-mode-to-fix-ipod-touch-and-i phone-errors>.

  • Ipod shows up in My Computer but not in itunes....HELP

    my ipod has been working fine since i got it a few weeks ago. only recently has it been acting up. I connect it to my computer via USB cable and itunes doesnt automatically show up anymore. I then click on itunes icon but my Ipod doesnt show up. i check My computer and see the the ipod is connected and under removable disk. i donk know whats wrong. Please helpp

    Do you know I've now got the same problem!
    Can I ask if you've downloaded any updates at all as since I've updated mine I've been left with no tracks on my iPod -I've tried every possible thing I know-I'm left with a uselss empty iPod! I've only had it a couple of days so I can see it going back! Wouldn't care but it was working smashing before this too-**** annoying.
    I've also had software probs with the Sony one I had to after updating stuff.

  • My ipod will connect to my computer but it wont come up in itunes. What should i do?

    When i plug my ipod into the computer it comes up as being connected. However, when i open itunes, it doesn't show my ipod. What could be the problem?

    Welcome to the discussions,
    Did you check if Apple Mobile Device Service is installed? http://support.apple.com/kb/TS1567
    USB drivers installed properly? http://support.apple.com/kb/TS1538
    Did you try to connect in recovery mode? http://support.apple.com/kb/HT1808
    More on unexpected freezes here: http://support.apple.com/kb/TS1421
    Message was edited by: Ingo2711

  • IPod connects to the computer, but not to iTunes

    When I connect my 30 gb iPod to the computer, the "do not disconnect" screen appears on the iPod, but it does not show up on a Source list on iTunes nor does it update. The iPod does appear in the Finder, so I know the connection is made. I have OSX 10.4.11 and just updated to iTunes 8, but this problem occurred prior to the update (I was hoping the update would solve the problem!). What to do???

    Yep add me to that list too, and I have tried the menu and select button on the ipod all that happens is the contrast goes very faint, tried the combo thing and it tells me it can't be installed on this computer, tried the 5 R's on the ipod frequent question page, all do nothing, totally un impressed with Apple for the first time, never had any problems but version 8 of itunes really needs bugging out before it was released, if anyone has any other ideas please do add them as I have just bought a whole load of music which is sat on my library and cant move to ipod...oh and I have also tried the create a new account and see if that works, well I could see the ipod but couldnt transfer the contents back to itunes - sooooooo unhappy can't do apple care as classic ipod is way past 2 years

  • My Ipod Touch is connecting to my computer, but not to Itunes?

    I connected my Ipod touch to my Windows 7 Laptop, and It connected. But when I checked Itunes, it didn't say that my Ipod was plugged in! WHen I checked in my ipod to see if it said it was connected, it didn't say anything. Help?

    Have a look here  >  http://support.apple.com/kb/TS1363
    and here  >  http://support.apple.com/kb/TS1538

  • Iphone 4s will connect to the computer but not itunes...help!!!

    when i connect my iphone 4s to my laptop it appears as ''AutoPlay'' as a camera but does not appear in itunes. any1 got any solutions??

    I'm having the same problem right now. I tried to connect my iPhone 4 to my laptop and the sound indicating that it is connected sounded off and my iPhone is charging but it won't sync. I tried reinstalling iTunes but that did not work for me.

  • Ipod is read in 'my computer' but not in itunes cant get it to sync but ipod screen says its connected, ive tried charging, restarting and updating but no success?

    any ideas how i could resolve this? last time it worked i was restoring it and it wiped all music so i have an empty ipod...

    Do the iPod Disk Diagnotic in this excellent post by tt2.
    If the report is good
    Try using the USB 2.0 port at the back of the PC
    Disconnect all other USB devices
    Dont use any other Apps while you are syncing or Restoring.the iPod.
    Disconnect from Internet and stop the Antivirus or other monitoring software.
    Have anice day!

  • TS1538 Devices (iphone/ipod) show up on my computer but not on itunes!

    OKAY so i cannot connect any devise to itunes my iphone 5 and ipod are not being shown on itunes yet appear on my computer, i have uninstalled and re insalled itunes and gone through the proxy steps and all the steps on itunes help BUT IT WONT CONNECT also the itunes store will not connect to the internet it appears with ERROR- 3212, and its really frustrating!! NEED help!!

    If you are using a pc in contrast to using an apple product computer - please uninstall all anti-spyware programs. (Norton, Mcaffee, AVG, avira, kaspersky ect ect.)
    Once you've uninstalled anti-spyware and all windows firewall give it another go.
    Good luck!

  • IPod classic recognized in 'my computer' but not in iTunes

    This has been going on for about a year and I've been able to fix it (but now I can't remember how) but now nothing will work. I connect it and this message pops up and asks 'Do you want to scan and fix iPod?' and I click 'continue without scanning' (because clicking scan and fix does nothing) and then my iTunes freezes. I don't know what to do!

    Next time you plug your iPod in, ignore the Scan and Fix message.  Click the Start Menu and type "cmd" into the search bar.  Then click on the appropriate Command Prompt application that appears in the results. 
    Then inside the command prompt type chkdsk [driveletter]: /f and then hit Enter.  So if you iPod's drive letter was g you would type chkdsk g: /f.
    This should resolve the issue of the scan and fix prompt.
    B-rock

Maybe you are looking for

  • Error when creating a Report with Form component

    I am trying to create a new report with form component but when I try to choose the Table/View name I get a web error "404 web not found". I know for a fact that the list is working because I see the list when I create a "simple form". Is this a bug

  • How to put measures correctly into spreadsheet

    Hi expert,      I loaded data into a planning model, and I can see data in BW and BEX, but when I put 'ACCOUNT' into row, and 'TIME' into column, I can't see 'measures' in spreadsheet, eventhough I drag 'measures' into spreadsheet from EPM pane, then

  • When will there be support for the panasonic gh-4

    wondering when the new gh-4 will be supported?

  • The node 'mysitename" is invalid.

    Hello all - i am getting the following error in contribution mode when i click on the create link wizzard: (link to a section is trying to enable) Unable to perform the action due to the following reasons: [+] The node 'mysitename:' is invalid. any i

  • Question using Java API in a multi threaded application for MDX queries

    Currently I'm building a web application that makes a lot of MDX calls using the Essbase Java API. Each time we run an MDX call we basically run the following code: IEssbase ess = IEssbase.Home.create(IEssbase.JAPI_VERSION); IEssDomain dom = ess.sign