My ipod will just give me a blank white screen

I'm having trouble with my ipod, I just downloaded a new update to my ipod, and my ipod just reset itself, and when the screen came back on it gave me just a white screen... I still have that white screen at the moment, and when I reset it will give me a quick three beeps and then a couple of seconds later the white screen will come back on, what should I do

Welcome Andrew
Ah ha, that old chestnut! There is a problem with the Updater - I had the similar thing happen, and I see others have too. It's possible the iPod lost communication with the computer or the update just finished incorrectly.
Let your battery drain right down. Then charge it up....prob a couple of hours at least. Once you've done that, reset it...
Hold down SELECT and MENU at the same time to reset the iPod; immediately after the screen goes dark, switch to holding down SELECT and PLAY/PAUSE. Keep pressing for ten seconds or so to be sure; the screen should remain dark. After a bit you can connect the iPod to the computer and things should be normal again. You may have to try this a couple of times - see how it goes.
Hope this helps...
::m

Similar Messages

My iPod will not turn on: completely blank white screen! HELP!!!

It was workingn fine this morning when it was connected to my car stereo adapter (purchased from Apple). Later this afternoon, when I went to plug it in again, there was no screen at all - I mean NOTHING came up - not even the green battery icon. When I got home, I plugged it into the adapter to my computer for more than 3 hours, but alas, still nothing. NOTHING at all but a BLANK WHITE screen! What do I do??? This was a $400.00+ VERY NEW (less than 2 months old!) iPod and I have been good to it (no dropping, protected in an apple iSock all day!!! This is NOT good!

You're welcome
I would have come here myself if my iPod wasn't turning on and I didn't know about that link
btabz

Firefox give me a blank white screen when i open it and when i type in an address in the search bar it just say new tab on the top left hand corner and its cont. to be a blank white page. IDK?

k when i double click on the fire fox short cut on my desk top or the tab under the start button, my firefox gives me a blank white screen with the phase " new tab" on the top left hand corner as if u clicked for another window. Even though its the 1st window that opens. when i type a website in the search bar it regristers but it just goes to the blank white screen w the new tab phase. i tried to open some of my bookmark sites and still the same thing.. a blank all white page. ive tried re-download the fire fox 6.0 then i deleted my current firefix then re-downloaded it again.. still nothing :(. im currently usaing my interner explore to write this and search the net.

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

How do i fix my ipod touch 4th gen. its a blank white screen?

i have recently downloaded IOS 5.0 and my ipod has been doing wat everyone else`s has lagging. But this morning i got on to facebook and trying refreshing the screen my ipod went screwy it has currently just showed a blank white screen and will not do anything not even let me restart it will not sdync with itunes will not power down it wont do anything and it wont let me do anything help me plz.!!!!!

Let the battery fully drain. After charging for at least an hour try what you tried already. If it still has the white screen that indicates a hardware problem an appointment at the Genius Bar of an Apple store is in order.

My ipod touch 4th gen froze! blank white screen and doesn't respond when turned off, or connected to my laptop

my ipod touch 4th gen froze! only blank white screen and doesn't respond when turned off or connected to my laptop!

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

Updated to Firefox 9, now it gives me a blank white screen. What's going on ?

I upgraded to Firefox 9. When backup was done it gave me a blank white screen with tool bar at the top. I thought maybe it needed "backing up your info" so I did that, still no Firefox screen. I rebooted the computer, still no screen. I can go to "Most Visited" and select Firefox, and it will go back to old Firefox screen that says I don't have the latest update. What's going on ?

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls

My ipod 4th gen went onto a blank white screen and turned off. what should i do?

My iPod 4th gen was dead so I charged it, the apple sign appeared and stayed on the screen for about 10 minutes then went onto a blank white screen and turned off. Now I can't charge it and it has already happened multiple times. what should I do? I also don't know which iOS operating system it is, does that matter?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I will be using my phone and it will just go to a blank black screen and will take 2 min to come on what's should I do ?

My phone goes out to a blank black screen and then takes 2 mins to come back on and I'll have to turn it off while it's on the black screen and then turn back on

Basics from the manual are restart, reset, restore.
Start there.

After restoring my ipod all I get is a blank white screen

after restoring my ipod all i get is a blank screen - time for a new one?

Maybe but first try the troubleshooting for white screen here:
iPod touch: Hardware troubleshooting

My Ipod Nano 7th Gen has a blank white screen.

I have tried to reset but still no change. even reinstalled the software. Is it time to return to an Apple shop?

Let the battery fully drain. After charging for at least an hour try what you tried already. If it still has the white screen that indicates a hardware problem an appointment at the Genius Bar of an Apple store is in order.

I can't connect to game centre - suddenly just a blank white screen?

Please help - I've had my ipad for a few years and never an issue - all of a sudden yesterday Game Center won't open - none of my games connect so I logged directly on to the Game Center app icon and it just brings up a blank white screen. I have logged out of my apple account and logged back in again, I have switched the ipad off completely and then switched on again, I have checked that wifi is connected and I have gone into settings to open the game centre settings and again it just hangs - it has my Apple ID at the top and then a blank screen underneath. I'm at a loss what to try next ... Any ideas welcome!! Thank you.

reset all settings
settings-general-reset-reset all settings
now reconnect to wifi
settings- wifi- click network name- enter password - join
if issue persists back up and restore as new via iTunes
Peace, Clyde

Blank White Screens After Installing Lion in Software

Before I start, I have a Macbook Pro 5,1 -- 2.66Ghz Core2Duo with 8GB of RAM, 500GB 7200rpm HDD, and an nVidia 9600GT M Graphics card
I installed Lion. This install was an UPGRADE from 10.6.8. Most of my apps arent working at all. Adobe CS 5.5 Master Collection, Final Cut Pro, Ableton Live, and even Time Machine.
They all just open up and give me a blank white screen (literally, a window, and instead of there being stuff inside the window its just a big giant WHITE BOX OF NOTHING). Time machine actually shows me the selected finder window but i couldnt select any older time machine dates.
Additionally I tried dragging icons off the dock, and it froze up my entire machine just by dragging them off the dock. I had to right click on icons to remove them.
I finally booted up into the "Recovery HD" and recovered my Time Machine backup to Snow Leopard 10.6.8 that I was using before.
I would very much like to use Lion, but it seems to have alot of problems with my machine. Should I do a completely fresh install maybe?
Any other solutions?

I have reverted to a backup from yesterday in which Lion was first installed and ran without problems. But this time, the windows of my apps were still white.
I also tried creating a new user account, thinking that there was a chance that it was a conflict with a piece of 3rd party software. Not that I can rule out software conflicts, but I still had the same problems.
So I'm now reverting to Snow Leopard. Ugh…
At least the "Recovery Partition" is pretty cool ;)
-Chris

Macbook does not shut down or restart. It stops at an blank white screen with the cursor moving around it. Updated to the latest software

I have a Macbook Air 13.3" 2012 model. For a couple of days my Macbook does not shuts down. It just stops at a blank white screen with the cursor still hovering around it. I have to shut it down forcefully every time using the power button.

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Note the timestamps of the BOOT_TIME log messages, which refer to the times when the system was started. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
☞ When posting a log extract, be selective. A few dozen lines are almost always more than enough.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
☞ If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

My iMac is giving me a blank white screen at startup help

I just installed the sims 3 on my iMac and after the installation it kept giving me the spinning wheel so I restarted it. Once it restarted it just gave me a blank white screen for thirty minutes so I restarted it and held the option key so I could go into the recovery HD and repair the disk but still blank white screen. Now I've run out of ideas.

Brendan,
I would post this in the iMac forum for a quicker reply.

Standalone (.exe) Flash 8 apps have stopped working with blank white screen

We have some standalone executable flash applications coded with Flash 8. These are the Microsoft Office 2007 command reference guides produced by Microsoft. Recently they have stopped working and now just display as a blank white screen when run.
As they are self contained Flash 8 movies, I'm unsure what would cause this.
Any ideas please? Could they be converted to a later version somehow? Or converted back to SWF so they can be recompiled back to exe with a later version of Flash? Any help would be appreciated. Thanks.

Check what you have at; '''http://get.adobe.com/reader/'''
Lets make sure you only have one program.
Type '''about:plugins'''<enter> in the address bar. Now search for the plug-in.
Example Only;
'''Adobe Acrobat'''
'''File:''' nppdf32.dll,nppdf32.dll
'''Path:''' C:\Program Files (x86)\Adobe\Reader 11.0\Reader\browser\nppdf32.dll,C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AIR\nppdf32.dll
'''Version:''' 11.0.9.29
'''State:''' Enabled
Adobe PDF Plug-In For Firefox and Netscape 11.0.9
Copy and post what it says here.
BTW, is it flash, or Firefox crashing? Please post any new crash reports.

My ipod will just give me a blank white screen

Similar Messages

Maybe you are looking for