My IPod will not automatically advance to the next song.

IPod will not automatically advance to the next song. I have updated and restored. The Shuffle has the two arrows crossing which I believe means it should be advancing. Any suggestions?

While playing any song on your iPod, tap the artwork to bring up the scrubber bar and additional controls. On the left hand side is a option for repeat (the right hand side features the Shuffle feature). You want to make sure this icon is white (meaning it is set to Off). If it isn't, tap it either one or two times to change its current setting.
Any luck there?
B-rock

Similar Messages

  • When using a playlist, is there a way to NOT automatically advance to the next selection?

    When playing a playlist on my ipod nano, is there a way to NOT automatically advance to the next selection?

    Try Folder Cleaner - VersionTracker or MacUpdate.

  • Why  doesn't my ipod advance to the next song when i'm listening to it.

    why doesn't my ipod nano, 6th generation advance to the next song while playing.  i have to manually advance it to hear the next song. .This is a nex nano, 6th gen that apple just sent me  because of possible battery issues in the nano, 1st gen.

    Hi lauraleeu,
    Thanks for visiting Apple Support Communities.
    If your iPod nano isn't advancing to the next track, this article is a good starting point for troubleshooting:
    How to reset iPod
    http://support.apple.com/kb/HT1320
    Best Regards,
    Jeremy

  • My ipod nano 7th gen. will not advance to the next song, it will keep playing the current song until manuaaly changed. All updates are current.

    My ipod nano 7th gen. will not advance to the next song, it will keep playing the current song until manually changed. All updates are current.

    I had this issue with my 6th generation nano.  It was driving me nuts, until I realized that somehow locked the repeat button on. Selecting one song rather than a selection will cause whatever song you have selected to play over and over and over and over..

  • My iPod will not show up in the Itunes device list plus I get an error message

    Hello!
    My iPod will not show up in the Itunes device list plus I get an error message
    " One or more devices is getting too much power from the USB wire" or sumptin like that.
    I've tried this with two wires, so the problem is not there.
    I reseted the iPod to factory settings but it didn't help.
    Anyone??

    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another USB port and computer
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar 

  • When I play my music from my playlist it will not advance to the next song, it just repeats the song over.  I have to advance to the next song manually.

    When I am playing my music it will not advance to the next song, it just keeps repeating the song.  The only way to go to the next song is to do it manually.  It just started this after the last update.  How do I fix it, hard to listen to at the gym.

    Check the song and see if repeat is activated. Down in the bottom left corner is repeat when the music is running. It would have a colored box around it if it is active. It would either read Repeat Song, or Repeat Playlist.

  • TS1398 After leaving a wi-fi connection my iphone will not automatically connect to the internet via the 3G network unless I turn it off and then on again. Is there a setting that can be changed to overcome this issue?

    After leaving a wi-fi connection my iphone will not automatically connect to the internet using a mobile 3G network unless I turn my phone off and then back on again. Is there a setting that can be changed to overcome this?

    Then I'm at a loss. Mine has switched automatically from the start, favoring Wi-Fi, any of its registered networks, whenever available. Only thing I can think of is trying a Force Restart and see if that clears things up: hold down Home and Sleep till the screen goes black and a white Apple logo pops up. Release and allow it to restart.
    May be similar, when I got the i5 about 16 months ago, the local carrier was starting to roll out 4G service. The phone would regularly lose all carrier connection, voice and data. Haphazardly would reconnect when it felt like it afterwards. Initially did the Off/On dance to speed things up, but discovered that using Airplane Mode would do the same without the lengthier power cycle. After awhile, the carrier 'fessed they were having capacity issues and later the problem went away. So yours too may also be a carrier issue.

  • My ipod will not turn on, only the apple sign shows up and then it turns off again., my ipod will not turn on, only the apple sign shows up and then it turns off again.

    My ipod will not turn on, only the apple sign will show up an then it turns back off.

    If not succesful try the remaining items of:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My ipod wont advance to the next song on its own

    When a song plays, it won't advance to the next song unless I manually click on the next song. I want to be able to have the whole album play without haveing to click on next songs. Thanks for your help

    Have you double checked to make sure the repeat setting has not been enabled?  If it's a 5G Nano, you do from with the Settings menu. If it's a 6G Nano, you can do it from the Now Playing screen.
    B-rock

  • HT4623 ios 7 download on iphone 4 stuck at rescue email.  Can only go back, will not go on to the next page.

    Please help!  ios 7 download on iphone 4 stuck at rescue email.  Can only go back, will not go on to the next page.

    That makes no sense . Can you take a screenshot and show me? hold home button and power for about 2 sec then on computer import the photo (http://support.apple.com/kb/ht4083) and upload it here. Have you restarted the iphone yet?

  • The nano advances to the next song in the middle of a current song.

    My nano (refurbished) will (in the middle of a song) suddenly advance to the next song.  What can be done to get the nano to play a song completely before advancing to the next song?

    Does it do this for every song, or just some? I had this problem with DRM-protected iTunes purchases (file name ends in .m4p). If this is your problem, I might be able to help.

  • My songs in my Music folder are stuck on repeat, how do I get them to advance to the next song?

    How do I get the songs in my music file to advance to the next song?  All they do now is repeat the same song unless I advance it myself.

  • When I am editing information is there a keyboard shortcut to advance to the next song without using the mouse to click "next"?

    When I am editing information is there a keyboard shortcut to advance to the next song without using the mouse to click "next"?

    Thank you so much. I've been trying to find a way to do this for a long time!
    Paul

  • Next Song Button - Stops the song and does not advance to the next song

    I just loaded 8.0.2.20. Now I cannot use the ">>" next song button. I've tried many playlists and rebooted the system - no luck.
    If song 1 in my playlist is playing and I click on the next song button, song 1 stops, song 1 remains highlighted in the main display area (list view).

    I just figured this out. All of my songs were "unchecked" after I was working on setting up iTunes for multiple ipods. Now that they are all check, the "forward" or "Next" button works fine.

  • HT4628 My macbook pro will not automatically reconnect to the wifi after a sleep. This has started after having upgraded to mountain Lion (10.8).

    Hi
    After I have installed Mountain Lion (10.8) - my macbook pro will not connect automatically to my preferred wifi network. It used to do that on the previous versions. It seems that the mac does not recognize the preferred network, as it asks me to choose a network after evey sleep/restart. I have modified the network preference to have my preferred netwrok at the top of the list. I have tried with/without checking the "ask me before joining a new network". It still behaved the same.
    Thanks
    Eitan

    Try making a new network connection and renewing the DCHP lease as detailed here:
    fix-os-x-mountain-lion-wireless-connection-problems

Maybe you are looking for

  • Upgrades to iTunes Plus are not showing up

    I'd love to upgrade more of my 128-bit tunes to 256-bit. I see that some are now available as such via iTunes, but my "Upgrade to iTunes Plus" doesn't show them. When I click on the title of one of them, I get a message that it is not available for c

  • How to connect to my printers network /wi/Fi

          I don't know how to connect my Windows 8 device to my Envy 4502 printers network ? What is my printers SECURITY KEY ?

  • How batch export layers to files in CS5

    Hi, I am a newbie in CS5 , I tried to batch export layer to files in CS5 , because I have thousands  PSD files that I need to export layers in  separated png files.. In each script I made I have the following error.." reference error: dlgMain is not

  • Apps stalling out at 90%

    Tried to install what used to be Production Premium under CC.  Selected all the apps.  After Effects begins to install, but stalls out at 90%.  I close the Adobe CC desktop app and try launching AE.  It opens just fine, but without an icon in my Wind

  • After "create application from database"

    hi all, i succeeded to build server and client side code using "create application from database" now my question is: how to use these files to build my application? for example, i need an OlapDataGrid that works on joined tables, not on a single tab