My iPod will NOT restore, even after 100 attempts!

So here's how it goes: I have attempted to restore my iPod literally 100 times (I have counted), and each time, only the Apple logo shows up. The actual iPod screen itself does NOT light up, and no matter how long I leave my iPod plugged into my USB ports (I have tried all three) on my laptop, nothing happens. Meanwhile, if I unplug my iPod from my laptop and then plug it back in, iTunes will recognize that my iPod is in need of restoration, and then it begins all over again! PLEASE HELP!!

Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Similar Messages

My Ipod touch says i have to connect it to iTunes so i can restore it but it will not restore even after following the steps to fix the problem.

My Ipod touch says i have to connect it to iTunes so i can restore it but it will not restore even after following the steps to fix the problem.

After pressing restore and after l5 minutes or so It comes up with the error 1611 and I followed all the steps but it still won't work.

My ipod will not open even after following instructions online

my ipod will not open even after following instructions online

Do you mean you can't unlock it?
We have no way of knowing exactly which online instructions you may have tried.
Apple - Support - iPod touch - iPod touch Troubleshooting Assistant
iPod touch: Hardware troubleshooting

TS3474 My ipod will not start even after holding down the Sleep/Wake button and the Volume Down button for at least eight seconds. What is my next step?

I have a sixth generation ipod 16gb nano. It will not turn on. I have tried hoding down the power button with the down volumn button without results.
Any other suggestions?

i have the same problem...my ipod is 4th generation?uggghhhhh

My Ipod will not unlock even after updating the software

Hi, I have an iPod Nano 4G, is locked to the Apple logo and iTunes will only recognize it when I go into hard disk mode.
and update your iPod with iTunes via the internet and everything was done in order but the iPod still has the apple logo screen
and check the test team that brings the same (Disco OK, OK Display, Touch control ok)
I do not know what else to do, I thank you beforehand all the help I can get
Greetings

Do you mean you can't unlock it?
We have no way of knowing exactly which online instructions you may have tried.
Apple - Support - iPod touch - iPod touch Troubleshooting Assistant
iPod touch: Hardware troubleshooting

My iPod Touvh 4th Generation won't turn on. It will not charge even after I used a few chargers and will not connect to a computer. The Home button is broken and I don't know if the Lock/Sleep button is now broken or stuck as well. What should I do?

My iPod Touvh 4th Generation won't turn on. It will not charge even after I used a few chargers and will not connect to a computer. The Home button is broken and I don't know if the Lock/Sleep button is now broken or stuck as well. I believe there may be a problem with the battery or the backlight. I've had my screen replaced once by some stooges. What should I do?

Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recoverymode use one of these programs.
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
For MAC or PC
The Firmware Umbrella - TinyUmbrella
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Ipod will not restore after update

I downloaded the new version to make app. to my ipod touch and I was told to restore my ipod to have the update. Now my Ipod will not restore and I have lost everything in Itunes also. What do I need to do?

I just did the install of 2.0.02 last and I had one dickens of a time restoring my library. Here is what happened to me. Right before doing the update it tells you that all of your music, videos etc.. will be removed from the Ipod Touch once the update is done installing. So I found a DVD and burned my library to it. Then I went ahead and did the install. It clean my Ipod Touch clean, but my iTunes library was still intact so I thought all will have to do is resync it but that didn't work. I tried and tried. I disconnected my external HD. Oh yeah by the way this is a new computer that I just bought and last night was the first time I used iTunes on it so I had to populate my library using iGadget.
Anyway, I realized that I didn't have manually manage my iTunes library unchecked I unchecked it and it began to sync the back up copy I had of my library. Did either of you back up your library before installing 2.02? Do you have a place where most of your music is stored outside of iTunes? You cannot have Manually manage library checked it won't restore if you do. Be aware though 96% of my cover art was gone with this restore. How annoying. I don't know if this is the information you were looking for but I hope I have been able to shed some light on the issue.

CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it. I performed a Time Machine installation from

CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it. I performed a Time Machine installation from that 2011 machine, and only Distiller and Acrobat would launch (none of the rest of the creation apps). So I ran the CS5.5 installer, uninstalled, then reinstalled, producing the same result. When I try to launch, nothing happens. What next?

Try...
Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html

App will not open even after reinstallation

How do I resolve this? Reinstalled multiple times, tried shuttting iPad down, is it a settings issue?? Running iOS 5.1.1 still, is that the issue?

I'm sorry to hear that you have trouble running
PS Touch. Please try to install via iTunes. This normaly helps.
-Guido
Am 02.02.2013 um 06:34 schrieb "seankelleher" <[email protected]<mailto:[email protected]>>:
Re: App will not open even after reinstallation
created by seankelleher<http://forums.adobe.com/people/seankelleher> in Adobe Photoshop Touch - View the full discussion<http://forums.adobe.com/message/5041972#5041972

HT201210 iPod will not restore & update?

iPod will not restore and update. I have checked my security settings and my itunes is up-to-date. My iPod will not do anything and cannot restore??

iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting
Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
http://support.apple.com/kb/TS3694#error1611

IPod will not turn off after being used as an external HD in Windows

I have disabled the option to have Itunes open when I connect my Ipod and I turned off the iTunesHelper in msconfig. This allows me to use my Ipod as an external HD without interference by iTunes. I have found that since upgrading to Ipod firmware 1.1.1, after I disconnect my Ipod using the Safely Remove hardware option in Windows XP SP2 my iPod will not turn off. I just turn on the lock, and let sleep mode set in after 2 minutes.
This only occurs if I connect the iPod as an external HD and does not occur when I connect the iPod with iTunes open to sync my music library. The problem started with firmware 1.1.1. Is anyone also having this issue, and if so, is there a known solution?

If you are not past the 2 weeks return period you can just return it.. for sure the TC is not ideal when you want something to store files.. the fundamental issue is lack of backup. The TC cannot back itself up. Nor can Time Machine in the computer backup network drives.
To mount the TC disk in finder.
Use Go, Connect to server. in the top menu.
Type in AFP://TCname.local or TCIPaddress. (where TCname.local is the correct network name of the TC.. ie not its name as typed in, if it includes spaces and illegal characters like apostrophe. You need to find the actual network name from network utility netstat scan or better still use proper naming on the TC.
Local is the default domain and helps.
If the TC is in router mode the IP is static and is better used than the name.
AFP://10.0.1.1 for example with default IP is far superior way to identify a network resource.
The disk password will be requested. Add it to your keychain.
It is better to load files to a DMG or sparsebundle.. See Pondini for info.
Q3 http://pondini.org/TM/Time_Capsule.html

Permissions will not set, even after using terminal commands?

Hey,
I found a thread on here for using the terminal to type in commands for the user permissions and for the PSIX permissions on Leopard (10.5) server. These commands are supposed to clean the server of all underlying(hidden) permissions that you cant see and then you are supposed to be able to then set the permissions again and finally, to hit "Propagate Permissions" so that all the permissions set for the shared volume then get farmed out to all sub files/folders. This did not work when I tried it in the terminal, it said "Command not found" even after I typed in the admin password. Is there anyone out there who can tell me the actual way to fix the old permissions and get new ones set?
The story is: We had an old server on a G4 when i first took control of the server, I took the shared hard drive out of the G4 and inserted it into a G5 and started using it with the leopard server. the permissions did not really need to be set on that volume because they had carried over from the last time they were shared. But we recently just got a Drobo unit for our server and I recently transferred all the shared files and folders over to the new volume, but ever since I cant get the permissions to farm out to all the stations, it shows me that its done on the server. But when I go to access the files I am able to delete faculty folders where I had set the permissions to "read only" so I am wondering if there is a streamlined way of going about this or if I should just start from scratch and use all brand new HDD's?
Please Help!

Hi ..
Try the tips mentioned here > Mini-tutorial: Force-deleting stubborn or problematic files in Mac OS X

HT1933 Movie rented will not complete download after 3 attempts

Movie rented will not complete download after 3 attempts

Thank you for using the Apple Support Communities
What I would suggest doing is contacting iTunes support for assistance on this issue. https://getsupport.apple.com/Issues.action

HT201263 My Ipod will not restore after following the instructions. Any ideas besides binning it and getting a Samsung?

How do I get my ipod touch to restore? I have followed all of apples instructions to no avail.

What exactly happens when you try to restore?

IPod will not restore in iTunes

when i turn on my iPod it shows a screen that sais "connect iPod to computer, use iTunes to restore." When i connect the iPod to my computer to restore, it sais there was an unknown error and that it could not restore the iPod. How can i overcome this issue?

I think I'm experiencing a similar problem with my
20GB iPod. The iPod displays the flolder with
exclamation icon. iTunes say the iPod may be
corrupted and needs to be restored. It says it has
completed restore and that all I need to do is plug
it into an external power source but the iPod never
changes over to the wall outlet icon and plugging it
in any way does nothing. I've been unable to use my
iPod for over a month now. I think it has to do with
the latest update from Apple since that is when the
problem started.
My problems started initially with the upgrade to itunes 7.0. I have tried everytthing I can find on the website to completely uninstall and reinstall to the new version. I even ran the check disk utility to see if the problem was my computer, but I didn't get any notice anything was wrong.
I too am convinced that this has something to do with the corrupted files originally reported after I upgraded from 6x to 7.0. My computer and my ipod(s) have not been the same since. My other computer which never got the upgrade to 7.0, but went straight from 6x to 7.1 has no issues. Ipods can be restored, and disk mode works and I can drag and drop stuff from there into the ipod. However, my main library is on my main computer, where the 6x to 7.0 took place and since then I have been in ipod ****.
I even tried using a working ipod that I restored on the old computer, and trying to move the entire library to the old computer via the ipod, and then sync my ipods with it... but I get either "path too deep" errors or "I/O device" errors when I try to move the library from the main computer to the ipod.
So everytime I restore the ipod on the old computer and everything is kosher, I try to use it on the main computer (with the problems) and I get the restore/reformat/corrupt loops - even though hypothetically the ipod was just restored on the other computer and should be fine, and the itunes software there says everything is up to date, etc.
Every once in a while a restore will take place on the main computer and I think the problem is fixed, but the moment I disconnect it, and reconnect it later, the loop starts over. That and not all my music transfers and I'll have one song of one album I ripped from CD last month, and the whole album of a CD I ripped two years ago. Even stranger I have a song that appears on multiple albums (orginal album, greatest hits, live album) and that song will show up on all those albums (So I have like eight versions of one song) but the rest of the songs from the albums won't show up, or maybe one other will show.
I really don't want to have to go through my CD library and re-grab all my music... but I'm afraid that might be necessary.
I have even tried running a virus scan on the whole computer, with ipod attached to see if that's the problem (Due to the new 80 gig ipod I bought last month, which I thought might have a virus on it), but nothing shows up. Although it did pick up some cookies on it and those were removed.
If anyone has any success fixing this problem let me know. I'm getting sooo... tired.
PC Windows XP

My iPod will NOT restore, even after 100 attempts!

Similar Messages

Maybe you are looking for