My ipod will not sync now that windows 8 has been installed, but ipod worked fine before
I am running a Ipod Nano think it's 3rd or 4th generation, when I had windows seven the ipod would be syncing fine with my iTunes, not that windows has updated windows to windows eight, I am now experiencing problems with my ipod syncing to my iTunes. It recognises the ipod but will not allow me to access it or change the music on it. I have followed all the More Info steps from the box that appears on my iTunes, I now am at a loss as to how it will ever work again, so I am stuck with the music on my ipod until I can change it. How do I go about getting my ipod back to syncing with iTunes after my windows update?
Try:
Sync Session Failed to Start iTouch iOS5: Apple Support Communities
iphone could not be synced sync session failed to start...: Apple Support Communities
Similar Messages
-
my ipad will not sync or back-up and thus cannot install OS5, it starts fine, but then says "cannot verify applications" and stops sync. Can someone help me?
going to "transfer purchases' does work - however the thermometer bar at the bottom reflecting apps, music, video, book, etc cpapcity fraks out, sliding left to right maybe 4 or 5 times during the process. Have you ever seen this?
After it is finished, the SYNC button is not longer darkened - so I thought it was safe to attampt an upgrade to OS05... which i am doing now... takes maybe 20 mins and then I normally get the error "the applications on this ipad cannot be verified" and the bottom thermometer bar zeros out all by my music. The content and apps are all fine on teh ipad. so strange. I made an appointment with customer service tomrrow AM - but i do not think i should have to pay for this - i have never even used support before!
I will update if it works - or re[eats the strange pattern again and does not update.
Thanks for your time and help! -
Hi, my phone was stolen a few days ago and just a few days ago the phone was online and it automatically locked itself since I've put it under lost mode and the thief probably switched off the phone immediately so that I cant locate it. Is it possible for me to have the last known location where he/she turned on the phone so that I can track it down from the last location? Thank you
Correct.
The only way to locate/disable/erase any lost/stolen iPhone/iPod Touch is through Find My Phone or a similar app. However, this requires that Find My Phone be setup/activated, on your phone, before it was lost/stolen. You would then login at iCloud.com & try to locate it. This requires the phone be turned on & have an Internet connection. There is no other way to locate a lost/stolen iPhone. Apple can't/won't help you, nor will your carrier. Report the loss to the Police, your carrier & Insurance company. Change all of your passwords.
If your carrier offers Blacklisting & they Blacklist the phone, it will be unusable as a phone.
If locked with a passcode, and running iOS 7.0, then phone cannot be activated or the passcode removed without knowing your Apple iD/Password. It will be nothing but a useless paperweight.
If not running iOS 7.0, the phone can be forced into recovery mode & restored. -
What will you use now that SiteCatalyst NetAverages has been discontinued?
I liked it - why was it discontined and what else do you use?
Google Analytics is all I have to fall back on for now.I had SiteCatalyst Netaverages as a free subscription ending a few days ago. I didn't realize it was cancelled for everyone though. I liked it a lot.
There's a monthly, or maybe quarterly survey that Adobe produces about browser share directly (I think), and of course Google and Microsoft track it, though nothing is as good as SiteCataliyst, as far as being impartial (and free). I will miss it. -
Problem opening Acrobat 8.1 Standard in IE Browser Now that Reader X Has Been Installed
I have Adobe Standard 8.1 and up until this weekend also had Reader 8 (I believe). This weekend my Reader was upgraded to Reader X. I can no longer successfully open a PDF in my IE browser through Standard (no problems prior to Reader X installed) Reader is ok in the browser but I have some applications that require Standard in the browser. When I try to do this, the PDF opens in a separate Adobe window. How can I adjust the settings to allow Standard to open in IE? Thank you
Problem solved. Does only happen with the Internet Explorer 32bit.
With Internet Explorer 64bit it doesn't happen.
Frederik -
i have albums that will not sync now. I have only owned my ipod for 5 mo and it appeared to sync fine. Now it say that the process is complete but there are 3 items that will not sync to my ipod. I i just purchased from the store!! please help! thanks maggibnd
Do they play in iTunes?
Can you directly redownload them by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
For unknown reasons iTunes will no longer open. I have an HP laptop running windows 7 with Kaspersky protection. It worked fine before but now won't open. I tried downloading the most recent up-date and it will still not open. Any suggestions?
thrillhousecody
Thanks for the reply with additional information.
Recent history for Premiere Elements points to the program having problems when more than 1 video card/graphics card is
being used by the computer on which Premiere Elements is running. This observation may seem contra indicated by the fact
that you say that the program did work well about 2 years ago in the same setup. But other factors may have set in with regard
to drivers, drivers versions, and driver conflicts. But this factor, does need to be ruled in or out.
Can you disable one or the other card to determine the impact of this on your problem?
But, of prime concern with regard to video card/graphics card is the use of a NVIDIA GeForce card with Premiere Elements 10.
Even if your NVIDIA GeForce were the only card, Premiere Elements 10 will not work properly unless the NVIDIA GeForce driver
version is rolled back to about May 2013. This may be one of the major factors here.
a. Device Manager/Display Adapters and find out Driver Version and Driver Date
b. Read the background information for the Premiere Elements 10/NVIDIA GeForce issue
ATR Premiere Elements Troubleshooting: PE10: NVIDIA Video Card Driver Roll Back
Also see the Announcement at the top of this forum regarding the matter - also with full details of the situation and how to fix with the
driver version roll back.
Please review and consider and then we can decide what next.
Thanks.
ATR
Add On...This NVIDIA GeForce situation is specific for Premiere Elements 10. You should not expect to see the problem for
later versions of Premiere Elements. -
My iphone 4S will not sync with my PC - it has in the past but now won't
My iphone 4S will not sync to my PC - it has done in the past and now no devices show up when I plug it in.?
Please help....
my itunes is up to date and I have restarted my computer.Hi,
Setting up syncing
Before setting up syncing you should download and install the latest version of iTunes. Wi-Fi syncing requires iTunes 10.5 or later and iOS 5 or later. You can change your sync options at any time. Each time you sync, content is synced between your iOS device and computer to reflect new, updated, or deleted content.
USB syncing
Open iTunes.
Connect the iOS device to your computer using the included USB cable and select it in iTunes under Devices on the left-hand side. Some tabs may not appear if you do not have corresponding content in your library. For example if you do not have any podcasts in your library, the corresponding Podcast tab will not appear.
Click Apply, in the lower-right corner of the screen, to sync.
Wi-Fi syncing
Open iTunes
To set up Wi-Fi syncing, connect your iOS device to your computer with the included USB cable. Select your device under Devices on the left-hand side.
In the Summary tab, select "Sync with this [device] over Wi-Fi".
Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it. The iOS device will sync automatically when all of the following are true:
The iOS device is plugged in to power
iTunes is open on the computer
The iOS device and the computer are on the same Wi-Fi network
While the iOS device appears in the left-hand column of iTunes, you can select the content tabs and configure sync options.
Click Apply or Sync to sync the iOS device.
Hope this helps -
My iphone 5s will not sync with itunes windows, it crashes as it is trying to sync the apps. Thoughts?
How is your iTunes "spacebar" looks like?
-
A website I frequently visit will no longer come up. Safaris says that my connection has been lost but it hasn't. I even get emails from the website but I still can't get on it. Why would it all of a sudden do this?
The reason, I included the annotation that I'd upgraded my Itunes, (On my Computer) is B/C in many forums - the very first question, *HELPERS* ask, is. "Do you have the latest version of Itunes downloaded on your computer." I wanted to knock out any obvious replies.
Now- "DO YOU have any idea,"... how your UNHELPFUL remarks, do absolutely nothing but hurt others that might not have the EXPERIENCE you have? How do you expect people to know things without asking questions? Whew! RUDE!!
Message was edited by: Apple I0S Help Team -
After loading Maverick iTunes will not launch. I get an error code: -45054. I am the administrator and have no groups or guests. Sharing options don't fix this. Also Fetch will not launch, I get error code: SSL error 9807. These worked perfectly before installing Maverick. Also everything that loads, all programs, take twice as long to load. I have MacKeeper and have cleaned and discarded all the garbage.
Remove "MacKeeper" as follows. First, back up all data.
"MacKeeper" is a scam with only one useful feature: it deletes itself.
Note: These instructions apply to the version of the product that I downloaded and tested in early 2012. I can't be sure that they apply to other versions.
If you have incompletely removed MacKeeper—for example, by dragging the application to the Trash and emptying—then you'll have to reinstall it and start over.
IMPORTANT: "MacKeeper" has what the developer calls an “encryption” feature. In my tests, I didn't try to verify what this feature really does. If you used it to “encrypt” any of your files, “decrypt” them before you uninstall, or (preferably) restore the files from backups made before they were “encrypted.” As the developer is not trustworthy, you should assume that the "decrypted" files are corrupt unless proven otherwise.
In the Finder, select
Go ▹ Applications
from the menu bar, or press the key combination shift-command-A. The "MacKeeper" application is in the folder that opens. Quit it if it's running, then drag it to the Trash. You'll be prompted for your login password. Click the Uninstall MacKeeper button in the dialog that appears. All the functional components of the software will be deleted. Reboot.
☞ Quit MacKeeper before dragging it to the Trash.
☞ Don't empty the Trash. Let MacKeeper delete itself.
☞ Don't try to drag the MacKeeper Dock icon to the Trash. -
On my PC, in I-Tunes, the iPod (touch) button disappears every time I try to sync or update. Everything has been rebooted, but no changes. Any ideas on how to sync to the IPod? Better yet, how to keep the ipod button on screen when itunes is open and the ipod is connected?
- Have you tried another USB port and cable?
- Inspect the dock connector for bend or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic. -
I am trying ot install my cs6 online. it says that my code has been redeemed but i took it off of one of my laptops to download it onto this one. it is still not working. please help
Find your serial number quickly
Download CS6 products
Activation & Deactivation Help
Mylenium -
No sound from my speaker iphone 4S, headphones play normal, phone rings normal, alarm sound normal, re-installed software, will not play sound when music is played from speaker but speaker works for everything else....(phone ring and alarm)... no notification sound for text messages......
I checked all settings..... good...
confused???
please advise,it's a hardware issue read more about it here
https://discussions.apple.com/thread/1343532?start=315&tstart=0
more hits
https://www.google.dk/search?client=opera&q=4:3&sourceid=opera&ie=utf-8&oe=utf-8 &channel=suggest#client=opera&hs=UGk&channel=suggest&sclient=psy-ab&q=iphone+stu ck+in+headphone+mode&oq=iphone+stuc&gs_l=serp.3.3.0l4.412779.418971.0.420896.16. 9.2.5.5.0.86.545.9.9.0...0.0...1c.1.9.psy-ab.HHtp6aEcO5U&pbx=1&bav=on.2,or.r_cp. r_qf.&bvm=bv.45175338,d.bGE&fp=43d9a4347e8aaeda&biw=1535&bih=773 -
My iPad will not update apps. It states it is installing but if never completes the installation this has been going on for more than 24 hours. What do I need to do?
Try a reset:
1. Hold the Sleep and Home button down (together) for about 10 seconds
2. Until you see the Apple logo (very important)
Maybe you are looking for
-
Can I get more than one song to accompany a slideshow on my iPad?
I have set up a slideshow on my iPad. I have created a playlist for it but only the first song in the play list plays and then repeats. I would like the songs on the playlist to play in sequence during the slideshow. Any suggestions? Thanks
-
Importing mp4 into Flash 8, converting to FLV
I just finished taking a Flash Video class where I understood I could import an MP4 and convert in to an FLV using encoding tools that come with Flash Professional 8. However, I opened a new FLA just now and tried to import an MP4 (File -> Import Vid
-
How to wipe my hard disk clean
How do I wipe my hard disk clean?
-
PHP include_path - Did something change in a recent security update?
We had a scare tonight when our highly customized webmail system did not come back after the system was rebooted. I quickly discovered that the include_path for php was set to ".:" which will obviously never work. Since the server has been running fo
-
Configuration for Third Party Sales Order
Hi All, I would need some advise on how should I go about to configure a third party sales order. The MM consultant has configured a special item category for it but the sales order has some incompletion data error where the schedule line could not b