My ipod wont advance to the next song on its own
When a song plays, it won't advance to the next song unless I manually click on the next song. I want to be able to have the whole album play without haveing to click on next songs. Thanks for your help
Have you double checked to make sure the repeat setting has not been enabled? If it's a 5G Nano, you do from with the Settings menu. If it's a 6G Nano, you can do it from the Now Playing screen.
B-rock
Similar Messages
-
Why doesn't my ipod advance to the next song when i'm listening to it.
why doesn't my ipod nano, 6th generation advance to the next song while playing. i have to manually advance it to hear the next song. .This is a nex nano, 6th gen that apple just sent me because of possible battery issues in the nano, 1st gen.
Hi lauraleeu,
Thanks for visiting Apple Support Communities.
If your iPod nano isn't advancing to the next track, this article is a good starting point for troubleshooting:
How to reset iPod
http://support.apple.com/kb/HT1320
Best Regards,
Jeremy -
My IPod will not automatically advance to the next song.
IPod will not automatically advance to the next song. I have updated and restored. The Shuffle has the two arrows crossing which I believe means it should be advancing. Any suggestions?
While playing any song on your iPod, tap the artwork to bring up the scrubber bar and additional controls. On the left hand side is a option for repeat (the right hand side features the Shuffle feature). You want to make sure this icon is white (meaning it is set to Off). If it isn't, tap it either one or two times to change its current setting.
Any luck there?
B-rock -
My ipod nano 7th gen. will not advance to the next song, it will keep playing the current song until manually changed. All updates are current.
I had this issue with my 6th generation nano. It was driving me nuts, until I realized that somehow locked the repeat button on. Selecting one song rather than a selection will cause whatever song you have selected to play over and over and over and over..
-
The nano advances to the next song in the middle of a current song.
My nano (refurbished) will (in the middle of a song) suddenly advance to the next song. What can be done to get the nano to play a song completely before advancing to the next song?
Does it do this for every song, or just some? I had this problem with DRM-protected iTunes purchases (file name ends in .m4p). If this is your problem, I might be able to help.
-
How do I get the songs in my music file to advance to the next song? All they do now is repeat the same song unless I advance it myself.
-
When I am playing my music it will not advance to the next song, it just keeps repeating the song. The only way to go to the next song is to do it manually. It just started this after the last update. How do I fix it, hard to listen to at the gym.
Check the song and see if repeat is activated. Down in the bottom left corner is repeat when the music is running. It would have a colored box around it if it is active. It would either read Repeat Song, or Repeat Playlist.
-
When I am editing information is there a keyboard shortcut to advance to the next song without using the mouse to click "next"?
Thank you so much. I've been trying to find a way to do this for a long time!
Paul -
My iPod will not play the next song, it continously plays the same song unless I manually change it.
It sounds like the repeat setting has been enabled. See page 21 of your iPod's User Guide for instructions on turning it off.
http://manuals.info.apple.com/en_US/iPod_nano_6thgen_User_Guide.pdf
B-rock -
Next Song Button - Stops the song and does not advance to the next song
I just loaded 8.0.2.20. Now I cannot use the ">>" next song button. I've tried many playlists and rebooted the system - no luck.
If song 1 in my playlist is playing and I click on the next song button, song 1 stops, song 1 remains highlighted in the main display area (list view).I just figured this out. All of my songs were "unchecked" after I was working on setting up iTunes for multiple ipods. Now that they are all check, the "forward" or "Next" button works fine.
-
ITunes wont continue to the next song
Ever since upgrading to iTunes 7 I have had the following problem. Occasionally iTunes will get to the end of a song and just stop playing. It will not move on to the next song. This will often happen after just a few songs have played in a very large playlist. How can I fix this?
Windows XP ProHi!
Did you make sure that the songs which you want to play in a playlist or in the library one after another are selected through the checkbox on the left? Otherwise the songs won't play automatically.
Hope this helps...
Bye
Thomas
MacBook 13'' Mac OS X (10.4.8) 2 GHz Intel Core Duo 2 GB 667 MHz DDR2 SDRAM -
Ipod touch is skipping and changing songs on its own
My ipod touch skips like a scratched cd and changes songs on its own when i am outside with it. I usually take it to the pool and listen while i'm laying out but recently it started doing this. I don't let sunlight hit it directly i have it covered by my leg or a towel. When i come home it starts working again. Is this a common problem and i cannot take it outside when it is hot, or do i have a defective one?
- Do you have the headphones with a remote? Sometime there is problems with sporatic signals from the remote especially with moisture/high humidity.
- Try the standard fixes:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod
If still problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
How do I get my music to stop repeating? The same song just keeps playing over and over unless I manually advance it. This happens whether I am on a playlist or not. All was fine when I used it yesterday..
Check the repeat icon to see if it is turned off.
Check in the Music chapter here: iPhone User Guide (For iOS 6.1 Software) -
Can anyone help with an iPod touch that will not shuffle or move on to the next song on an album/playlist?
After you dry the iPod:
How to fix a wet iPod or iPhone | eHow.comfix-wet-ipod-iphone.html
Connect the iPod to a charging source overnight and then try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
If iTunses can see the iPod you can backup the iPod
iOS: How to back up
http://support.apple.com/kb/HT1766and copy media from the iPod
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
If iTunes does not see the iPod then its contents are lost -
After updating my Ipod with IOS 5, some of my music no longer plays. Album cover is shown, but the IPod skips to the next song. Any ideas why?
A not uncommon problem. See this previous discussion.
Problems with IOS 5 Music App (Updated)
Maybe you are looking for
-
What do I do when I get the message: This Apple ID is valid but is not an iCloud account?
-
I just downloaded iPhoto upgrade for my Macbook. I just bought Lion and wanted to upgrade my iLife suite. I downloaded this and it works great. I looked the other day at the App Store and saw it said upgrade beside iPhoto. I clicked it and it told me
-
How to use dataview xtype in cq5..
Hi, Can anyone help me how to use the dataview xtype component in cq5.. I am able to show dataview grid in dialog with styles and default text. But passing the data to that dataview is the task for me. I am not able to get the process to pass the val
-
Reduce Remaining Order Planned value for services with PO
Hi guys, I'am looking for a way to reduce the remaining or residual order plan value for a network activity with services where the amount on the PO is below the planned value. If for example the planned value amounts up to 1000 and the PO has been r
-
NIK HDR Efex Pro 2 anomaly with Photoshop CC
Every time I use HDR Efex Pro 2 to create a HDR when I return to Photoshop CC the preview in brush size/hardness is missing. To recreate the error, execute Photoshop CC, open 5 files to create a HDR. Select one of the files and while pressing Contro