My ipod wont automaticly connect to my house wifi
it wont automaticly connect my house wifi what should i do
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Similar Messages
-
I just got a iphone 5 and it wont automatically connect to my home wifi?
i just got a iphone 5 and it wont automatically connect to my home wifi?
Hello Andy,
Congratulations on your new iPhone 5! It sounds like it is not automatically connecting to you home Wi-Fi network. I recommend following the steps under the section titled "Unable to automatically connect to Wi-Fi" in the following article for this specific issue:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thank you for using Apple Support Communities.
Best,
Sheila M. -
My iPod Touch is connected to my house internet and every few hours, it doesn't work so I have to shut it off and turn it back on which makes my iPod slower, how do I make it connect the whole time?
Device Not Recognised
For PC
http://support.apple.com/kb/TS1538
For Mac
http://support.apple.com/kb/ts1591 -
I forget to charge my MacBook Pro and it turned off because of that. Now it wont automatically connect to saved networks. I have to put in manually to make it work. Even after restating still the same. If I close the lid it looses conection. Sometimes pulling the Battery out will fixes it untill we forget to chage it.
Mac OS X version 10.6.8I forget to charge my MacBook Pro and it turned off because of that. Now it wont automatically connect to saved networks. I have to put in manually to make it work. Even after restating still the same. If I close the lid it looses conection. Sometimes pulling the Battery out will fixes it untill we forget to chage it.
Mac OS X version 10.6.8 -
When try to connect my iPod touch 4th gen to my house Wifi it won't connect, it used to work fine but now it dosen't work, but it does say that the internet is available, but when I tap on it it just loads. all other devices work fine.
Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My iPhone 5 will not automatically connect to my home wifi
My wifes iPhone 5 will not automatically connect to our home wifi, she has to log in each time (she has ios 6.1.4). Mine, however will connect automatically with no issues (we have same phone and ios). Here is what I have done so far to fix the issue and none have worked:
* I have reboted (hold home button and sleep/wake button)
* I have reset the network connections
* I have turned "ask to join" on, connected to the network, turned wifi off and then back on, it did not connect to the wifi
* I have manually connected to the network through the manual option, turned wifi off and then back on, it did not connect to the wifi
* I have erased all content and data and resored the backup from iTunes
* I have restored iPhone from iTunes and restored the backup from iTunes
My phone does not list a "forget this network" as an option on the wifi connection when I pull it up, so this is not an option. So, what else is there to fix the issue?Hi there Huskerscott!
I have some information here that can help you troubleshoot this issue:
Unable to automatically connect to Wi-Fi
Avoid giving your Wi-Fi network a common name.
Some wireless routers are preconfigured with a common SSID (network name) such as "wireless" or "default."
If your desired Wi-Fi network has a common SSID, try changing the SSID to something unique2.
If your desired Wi-Fi network has a unique SSID, reset network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings including: previously connected Wi-Fi networks and passwords, recently used Bluetooth accessories, VPN and APN settings.
Which is taken from this article:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
It also may be helpful to follow these settings, which are optimal for use with iOS and OS X devices:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
My ipod will not connect to my home wifi, it can see it and asks for a password but will not connect. I have tried it at another location and it will connect to other wifi connections. I have another ipod that is connecting just fine to my home wifi.
- Reset the iPod. nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections -
I use IMAC upstairs connected to the house wifi downstairs where the networked printer is. I have 'found' the network printer on my IMAC settings but when i send to print I am getting a pop-up box which has 'apple' as user name and is asking for password. I have tried my own IMAC password but to no avail. The printer also shows a pop-up box stating 'awaiting authentication.
Any help appreciatedYou are asking several different questions. If you need to store your photos, music, and movies on an external volume, you certainly can. Any externally connected hard disk drive will work, connected either directly to your Mac or to your Time Capsule as a shared volume.
You should not rely upon using that as a backup device though. Although you certainly may use it for both purposes, it is a better idea to have dedicated backup devices for a variety of reasons not limited to redundancy. You would not want to simultaneously lose all your pictures as well as your backup. If they are all on the same device, that could happen. Furthermore, a backup cannot back up the volume on which it is running.
As for adding an Extreme or Express, using its LAN port for your iMac, and then enable Internet sharing so you can effectively use the iMac as a "hotspot", you can do that too, but I am unclear on what benefit you believe this arrangement would convey for you.
An Extreme's Guest network is separate from its Main network; that is the reason for having it. -
Ipod wont stay connected and icon disappears from finder
I have a new 80g video ipod, have had it for about three weeks. Up until today all was fine, but now it won't stay connected to itunes after updating files. It connects, shows up on the desk top for a few seconds, updates any new files and then just drops out. It keeps the do not disconnect screen for a few seconds, then the red warning logo disappears and after that i can not do anything with the ipod in itunes. The ipod music list is greyed out and I can't add any new photos or change anything. The only thing I have done differently since it was last working ok was I connected my camera using the camera connector and uploaded some pictures from that.
I have done a reset and now a restore but that hasn't helped.
is the problem with the ipod or itunes? What can I do?Sorry, this may be a case of "always read the manual first"!
I think that what I thought was a fault with the ipod was in fact due to the default preference for auto syncing being enabled. As I had my previous ipod set to manual update I was used to being able to make changes to the ipods lists whilst connected, but as my new ipod is still set to automatically sync I now realise that this is why the ipods list was greyed out. In this mode it appears that it is usual that as soon as you connect, itunes updates any changes and then disconnects and the red "do not disconnect" screen on the ipod goes. If there were no new additions or changes to playlists made since the last time you connected, the sync will only take a few seconds and then the ipod screen goes back to the menu list. Also, because in auto sync the ipod will be updated with a copy of your itunes contents, the ipod's list is greyed out due to the fact that you are not able to make changes independently from your itunes list. (i.e. you have to make the changes in itunes in order for these to be replicated on the ipod).
In order to keep connected and be able to alter things on the ipod list you have to have the preference set to manually update. Then the ipods contents are not greyed out and you can add, delete and change playlists without doing this in your main itunes on the computer.
So I think I have answered my own question, unless I am still misunderstanding something here, and the moral is, download and read the manual properly before worrying that there is something wrong with the machine!
I still think its a bit weird that the ipod icon disappears from he desktop though as I thought it would be at least recognised as being attached even if not in disc mode. Should it still show in the finder anyway? -
How can I make my harrier automatically connect to my home wifi?
Hi, I got an EE Harrier about 3 weeks ago for the wifi calling (confirmed by the EE shop staff....) only to discover that it's not actually available yet - oh well. My question is how can I get the phone to pick up my home wifi automatically? Obviously as I leave the house it loses the wifi but I have to manually connect it every time when I come back in. i know on other Android phones there's a 'Smart Network Switch' but the Harrier doesn't seem to have that, or if it does it's well hidden. Can anyone help please? TIA
Hi Glossopian, did you find a remedy to this? I just renewed my contract and upgraded my phone to the harrier. Like you my last phone automatically connected to any wi fi I had already entered a password into including home, holiday accomodation, pubs etc. Now I have to manually tell it to connect every time I go out into the garden and come back into the house. Very frustrating!
-
My MacBook Pro doesn't automatically connect to my home wifi. Is there a way to set that up?
I'm new to macs as of last night. Which would explain why perhaps this is an easy task, but I have difficulty with it. Here's my situation; my wireless network is password protected. When I initially connected to it it prompted me to put in a password, I did, and then I was connected. Every time I turn my computer back on or wake it up, I have to go up, click on wifi, click on "Tardis1" and click connect. It doesn't ask me to put in the password again, however it doesn't connect automatically like it should. It also gives me this message every time I manually link it, "Mac connected as wep but not wepa/wepa2 personal" or something along those lines. Any help would be great, thanks!
Hello, andyBall_uk. I figured out the problem, and I'm going to reply to it on here in case anybody else has the same issue they can see this solution. I already had an iOS device before, which saved a "keychain" of the old login info for the router. This was back when the router did have WEP security. Since then, it has been reconfigured for WPA2 however my old keychain was trying to join it as WEP.
To solve this, I went to System Preferences>Network>Advanced
From here, I noticed the
[ + ] [ - ] Drag Networks into the order you prefer
Highlighting my router and hitting the [ - ] sign removed the keychain that would previously only connect as WEP. This now allowed my computer to automatically connect to the router every time I opened it or turned it on. -
Why can't I connect to my house wifi?
I just recently moved to a new house and my macbook pro can't connect to the wifi. Even if it was connected, the page doesnt load. Sometimes it works fine but usually it disconnects. When i try connecting back, it says "connection time out" or "invalid password". The other laptops in the house doesnt have any problem connecting. My iphone also does not have any problem connecting either. Whenever i try clicking "network diagnostics" and click on my wifi, it says "This computer was unable to join the Wi-Fi Network you selected. You may have entered an incorrect password or network name, chosen the wrong type of wireless security, or you may be out of range of the base station." Though the wifi modem is just right outside my room. When i click "network setup assistant" and click on my wifi, it always say "invalid password" and i know i type in the right password. The house i was previously staying in, the wifi works totally fine. Can anyone help me? Is there something wrong with my mac or is it the wifi? Though, i doubt its the wifi because all the other laptops in the house is working perfectly fine. Its just my mac that is having problems (btw, im the only one using mac in the house).
Wifi problems seem to crop up a lot on here and unfortunately there doesn't seem to be a 'one fix' solution.
However, sometimes any one of the following may help although, unfortunately, not always. - in no particular order:
Check wifi security - if it's WEP change it to WPA or WPA2 (preferably, as it's more secure)
Change the wifi channel on the router
Create a new Network Location: http://support.apple.com/kb/HT5289
Reboot the router
Also take a look at this link and the links within the article for other ideas. They mainly reference Lion, but still seem to be relevant to Mountain Lion:
http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conte n t=FaceBook
...and this link:
http://osxdaily.com/2012/11/30/resolving-stubborn-wi-fi-connection-problems-in-m ac-os-x/ -
cannot connect to itunes store
wifi works and confirmed by accessing google & ew.com
tried reset and removed everything from ipod
still receive error cannot connect to itunes store
did google search and could not find a solution. found other's also asking for help
sent request to apple and received response with list of articles. already tried these and still don't have answer. inluded ipod model and serial number (ma62ll / 9c740wffw4n) thinking this might help them provide a specific solution.
version: 1.1.5 (4b1)
help, i want to connect to itunes,Try:
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors | iPad Insight -
I message NOT working... cannot send large files through sms... occassionally I can get it to connect but soon as I leave wifi it wont reconnect to wifi OR let me use imessage again... Getting really irritated.. switched to iphone because of the lack of glitches... maybe time to go off the grid...
Help pleaseThe solution that worked for me was to Backup and then Restore.
For the backup: you can do it via iTunes (plug the iPhone and right click over its icon on the Devices section and then choose Back Up) or download your photos, contacts and other important documents to your Mac using iPhoto (just download your photos) or apps like My Contacts Back Up (it will email you the full list so you can upload it to the iPhone later). Make sure you backup properly please!
After you have done the back up choose Restore in iTunes and that will erase all the files and apps from the iPhone so it will be back to the settings it had on the day you used it for the first time (you'll be able to recover all the apps you paid for since they'll be linked to the Apple ID you used to purchase them).
The iPhone will still have the latest version of iOS (6.1.3) so if the problem is -like in most cases- software related it would be fixed and you'll able to pair the device again. If not maybe you will have to downgrade the iOS to the previous version.
Hope this helps! -
My iPod wont get connected to iTunes because its continuously being asked to be restored
iTunes keeps asking me to restore my ipod (5th gen,16GB) when I've done it already. How can this be fixed?
Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Reg. Expense without tax was found
Hi Experts, When i'm adding A/R invoice gettting Expense without tax was found, i put all the line item given tax code, Even im getting error, Can anybody help me.... Thanks in Advance. Anand.R
-
Defining an SLD Strategy for XI Migration using CMS
Can the following scenario occur? Please explain if any of my assumption are incorrect. -> An XI DEV, QA, and PRD environments each with a separate "slave" SLD. -> A separate "master" SLD that contains all XI dimensions (i.e. transport, solution, an
-
Dial up access crashes after SB Audigy 2Zs installat
My Audigy 2ZS sound card seems to work fine, although I'm just starting to explore the options. My problem is that since I installed this product, I experience a hard crash (blue screen) whenever I try to go online. I only have dial-up, but both aol
-
App shuts down when moving files
After updating the files, when I try to move them back to their folders, every time I try to scroll down to select the folder to move them to, the app shuts down.
-
hello, how can i get the position of the mousecursor (in x, y coords relative to the complete screen) if its not invoked by a mouse event (else its easy with event.getX / Y ())? cu, cpio