My ipod wont display anything, just a black screen.
i took it off of the charger yesterday and the display wouldnt work, i tried resetting it, but my laptop wont recognise it and i cant tell if it's charging anymore
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
hi, i woke up nd my device will not turn on . ive tried the home and unlock button, my phones on a charger also but the battery wont pop up. just a black screen. What do i do ?
Leave it alone for an hour and try the reset procedure again. Make sure you're using a genuine Apple charger & cable in a known good wall outlet. You can also try another cable if necessary, and make sure the charging area is clean and free of fluff & debris.
-
I was downloading an app and it wasnt downloadnig so i turned my ipod off and now its a just a black screen with the the loading circle. Its been like that for 10 hours. How do i get back to my home screen? or how do i get the litle loading circle to go away.. it wont even load into itunes
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipod wont do anything! I go to turn it on and it just stays on the apple logo screen, and I can't do anything. When i plug it into the computer it still just stays at the apple logo. The ipod dont show up in itunes or on my desktop. I tried reseting it and it turns of and then comes right back on and freezes on the apple screen. After being plugged into the computer for awhile it will go to that little disc thingy with the bar at the bottom loading, which means its checking for whats wrong and stuff but after its done it shows the disc with a little checkmark by it. Anyway please help!
Try these articles:
iPod starts up to Apple logo and stays there:
http://docs.info.apple.com/article.html?artnum=61584
http://docs.info.apple.com/article.html?artnum=60999
Disk scan icon:
http://docs.info.apple.com/article.html?artnum=60943
Best wishes,
CG -
Zen vision :M wont display anything when on & computer cannot recogn
my?zen vision :M wont display anything when?i turn it on & my computer cannot recognise it... no my lcd isnt imploded or damaged...
p.s. the buttons wont even glow when on plz helpAre you sure it's turning on? If the display isn't turning on and the buttons don't light up, it sounds like the player isn't powering on at all. Do you hear it playing music?
Have you tried leaving the player charging for a few hours, and then checking if it starts up on the PC? When it's turned on, does the system recognise it at all, does it see an unknown device for instance?
Cat -
my daughter's ipod only displays the apple on the screen and we can't get it to do anything. any suggestions ?
tia,
Click on the following link, which is an Apple tutorial which is related to the problem you are having:
http://support.apple.com/kb/TS3281 -
my iphone 4 randomly froze while i was face timing and now its just a black screen with thin grey lines on it. it wount turn on even if i press the lockscreen or home screen button. ive tried chargingit but that wont work either. It's been like this for about two hours now.
Hold down the Home and Power button for 20 seconds. And try to update again.
Also read and follow this:
http://www.apple.com/support/iphone/assistant/restore/ -
My itouch camera will not work. SOmethimes the shutter wont even open. other times it opens but the camera doesnt show anything but a black screen. how do i fix this???
Basics from the manual are restart, reset, restore.
-
i erased my ipod in the setting because i wanted to restore my ipod and someone told me to delete it so i did and now its just a black screen and when i put it my pc it doesntt show up what do i do plz help
Connect the iPod to a charging source and then try the will not turn on topic of:
iPod touch: Hardware troubleshooting
If you have a 2G iPod and did not have the iPod connected to a charging source it is likely that the battery fully drained before the erase was complete since it can take hours to do the delete. -
my ipod touch 4 gen. has a black screen with a apple and under it is a load bar that is empty and wont load
Try here:
iPhone and iPod touch: Frozen and unresponsive
iPod touch: Hardware troubleshooting -
ITunes purchased shows do not playback just a black screen
My wife and son are leaving tomorrow to ME. We purchased ~1$12 worth of shows. They playback in iTunes application but do not playback on her iPod video 30GB and she is running 1.1.2 firmware.
You can select the video and feel the drive queueing it up but just a black screen is displayed. I have other videos I have converted myself and they work fine.
Any ideas on what causes this?bump
-
My camera is not working, just a black screen, won't take pics please help
WWhy won't my camera take pics..just a black screen ?
CClose the camera app and reset the iPad.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
We got a new computer so i plugged my Iphone4 in, nothing happened so i unplugged it now its just a black screen with the itunes icon & Usb and i cant turn it off or get on anything?
PLEASE HELP!Plug in your phone and launch iTunes on the computer. Then in the sidebar look for something about an iPhone. Click it and set up your iPhone. Has this iPhone ever been synced with another computer?
-
My iPod 6th Generation has just a white screen
My iPod 6th Generation has just a white screen and I can't do anything with it. What do I do to fix this, and what happened?
Never mind, I fixed it
-
TS3354 I downloaded a movie but when I play it, it's just a black screen
I downloaded a movie on my iPad but when I go to play it, it's just a black screen. The whole entire movie is just a black screen.
Hi, Ktjayne05.
I would recommend closing any open applications in multitasking and restarting the device. If unfamiliar with multitasking, I have included a screenshot on how to process an application close. Test playing the movie after processing these steps.
If the movie still displays a black screen, I would recommend deleting the movie and downloading it again free of charge by accessing your purchases via the iTunes Store.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
Hope this helps,
Jason H.
Maybe you are looking for
-
2LIS_03_BF transformation problem
Hi I am using TRCS 2LIS_03_BF_TR -> CUBE 0IC_C03 installed from Business Content but when I tried to activate it ,it gave me error in start routine. Error is: :In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter "SOURCE_PACKAGE" is incom
-
Where to type the name of a song I want to buy, at store page nothing seems to be interactive. Thanks Vladimir
-
Hi, Is it possible to drill down from World Map to country specific map by clicking on the country? The "Functions of the Advanced Geo Function Bar" white paper mentioned Drilldown function in Context menu. However, I could not find Drilldown entry
-
Replicate Tables as Staging Tables in a DWH
Hi We are in process of building a Data Mart, for the staging area we are considering to use GG as the Change Data Capture tool. The idea is in the source (OLTP Database) we have a table called T1, this table has no PK and it's partitioned by day, ge
-
HFM Calculated USD amount won't clear
Hello, I'm struggling on how to clear out a calculated USD amount in an Entity (which has a default foreign currency). There was originally a functional amount that translated an appropriate USD amount, but after I zeroed out the functional amount (E