My ipod wont power on. and holding the home and power buttons doesnt work. and it isnt recognized by itunes. what do i do? i just got the screen replaced.
Idk what to write here
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem or a botched repair job. Take it back to where you got it fixed.
Similar Messages
-
My iPod wont turn on i was using it one moment and it was fine now its not turning on. my home button doesnt work so i cant use that solution what should i do now
Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recovery mode,
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
For MAC or PC
The Firmware Umbrella - TinyUmbrella
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iphone 4s is frozen and my lock button doesnt work and i cant slide to power off the phone. HELP
my iphone 4s is frozen on the lock screen. my lock button doesnt work and i cant slide to power off the phone. It has 100% battery and nothing happens when i plug it into the computer.
My phone screen also is in negative. It is like twitching and ive tried to invert the colors but thats not it. i cant see any apps, pictures , or anything in regular colors. PLEASE HELPPP!You can't. You'll have to wait until the battery runs out and then recharge the phone. It will restart.
Sounds like now's a good time to get the phone fixed. -
i have a iphone 8g and the lock button doesnt work and i forgot my password and i was wondering if anybody can help me??
You will need to restore your iPhone, take a look at this link, http://support.apple.com/kb/HT1212
-
I´m just starting using ATV2. All is working well excepted the home share. It start working and few minutes after not more. What a ihave to do?
What I have to do to solve this problem? To get the home share working again i have to restat avering thing and then it works for a few minutes again. It is crazy
-
dropped my iphone and now home button doesnt work and will not charge.lower third of it seems not to work.i assume it's had it.what will i lose off it?
rbrook0113 wrote:
I know any device could malfucntion but if it costs $40,000 to buy you could at least warn someone of the possible malfuctions. It makes the company look bad when a large amount of your devices act up and you "cant help them" if they dont pay extra. Im just saying.
Sorry but that makes no sense at all. How can they possible know what things will possible malfunction on your device? Anything that they think is highly likely to malfunction they would have addressed in desiging and manufacturing the device in the first place, during development. They've made and sold many millions of iPhones, and many of them have lasted years without any problems (I know, I've owned such iPhones personally). So how could they possible know if yours was any more likely to develop any issues than any of those other trouble free ones?
It's hardware - stuff sometimes breaks randomly. No amout of money ever guarantees or even reduces the likelyhood of random product failures.
Take it in to Apple and see about getting it fixed. -
1.my Iphone 4s keeps searching for service ...
2. it isnt recognized by itunes or my pc
3. im stuck on the activation screen as a result
....i need helpHey Jadonalecwilson,
Thanks for the question. If I understand correctly, you have a few issues with the iPhone. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
Get help activating your iPhone - Apple Support
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
If you see No Service in the status bar of your iPhone or iPad - Apple Support
Thanks for using Apple Support Communities.
Have a good one,
Mario -
My Sleep button doesnt work and my ipod its frozen in apple screne what can i do??!?!?!?!?!?!?
My sleep button doesnt work so i tried to restore when i was restoring it was the apple with the loading circle it just stop and it dosent move from 1 day ago an i cant restore with sleep an home button cause it dont work!!!! When i connect it to itunes it dosent apper even if i press the home button. PLEASE HELP !!!!!!!!!!!!!!!!!!!!!!!!
Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset network settings: Settings>General>Reset>Reset Network Settings
- Restore from backup
- Restore to factory settings/new iPod. -
my iphone 4 is not in service its deactivated the home button doesnt work meaning theres tape to keep it in its place, and the front screen is cracked can i get a new iphone 4 for free. what should i do.
Take it to Apple for an out of warranty replacement for $149US.
-
i have an iphone 5 that i traded with from a family member. its has coverage but now the sleep/wake button doesnt work sometimes. can apple replace my iphone and give me a new one or is it just something they can repair? i dont have the box or recipit to apple care or the iphone
Apple can fix it without your receipt or box. They pull the serial number from the device and determine warranty status from that. Hopefully ApplCare was registered to the product before you lost the receipt though. If not, you can go back to the point of purchase and obtain your AppleCare receipt and Apple can help attach it to the iPhone.
-
i tried to update my ipod to the newest software and it got stuck on the apple for like ten minutes the it told me to connect to itunes and itunes doesnt recognize my ipod so now its on recovery mode ! my lock button is broken so i dont know what to do ? HELP !
Try as best you can:
Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recovery mode use this program
RecBoot: Easy Way to Put iPhone into Recovery Mode
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
This doesnt work on my phone
"To check the currect msg centre no. type
#50057672# then press calling btn.
To set a new MSG centre number:
1. Call to your service provider and get the msgcentrenumber.
2. Type 5005*7672msgcentrenumber# press calling btn.
3. rember the # sign after your new msg centre no."
Help me changing or atleast checking my msg centre number.
My phone is not sending messages.Read the manual.
The basics are restart, reset, restore.
iPhone User Guide (For iOS 4.2 and 4.3 Software) -
Just installed IOS 6. Now when I try to check my email on Yahoo I get this error. MFMessageErrorDomain error1032.
Just got this phone, now wishing I had not......HELP!!!!
Read in net to uninstall Yahoo mail and reinstall....DID THAT, still same.Hi there,
Do you have icloud account? You need firstly turn off find my iphone (by go to icloud.com -->sign in --> go to "Find my iphone" and erase your iphone in it). And then you restore your iphone with DFU mode.
When you erase your Find my iphone and if you can not restore, your iphone has a problem with hardware.
Some infos can help you.
Kind regards, -
I have an old ipod touch and it keeps saying, ipod is disabled. I connected it to itunes and it said, sorry you need to put the passcode in, but it wont let me. And my power button doesnt work.
iOS: Unable to update or restore
-
My ipod touch 5th gen. 16gb ios 8.1.2 wont turn on, i press the power button and nothing happens, and my home button doesnt work, PLEASE HELP ME OUT!!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Hi,all I have a problem with formatting date with SimpleDateFormat. I need that the date will be of format dd/mm/yyyy hh:mm:ss With date all is showing fine,I use dd/MM/yyyy ,but if I add hh:mm:ss instead of right time I give 12:00:00. What may be t
-
How to detect H&J violations from a script
Is there a way to detect all lines that violate the H&J settings? ID highlights the lines in yellow, and I'd like to get a list of those lines so I can monitor in a script how changing frame width solves the problem lines. I realize I could manually
-
Looking for copy of older MSAccess.zip (.jar) file
Hi, I had been using a version of the MSAccess.zip (.jar) file that I downloaded about a year ago (March 2005) that I lost when I got a new workstation recently. For whatever reason, the MS Access database I need to migrate doesn't play well with the
-
Interaction History. Pass Business Activity ID into ZComponent
Hello, I have a requirement to pass Activity ID into custom ZView. The main component for interaction history is ICCMP_BT_ACT. I've done binding to custom controller before but this one doesn't have it. I've adden new button to the screen to invoke Z
-
M-Audio Firewire 410 install disables all my other audio
Only a reinstall of my OS brings back audio. When I tried reinstalling the Firewire 410, it again disabled all my audio (reboot does not restore). I bought it as an interface to record vocals and guitar into GarageBand 1.1. Anyone experienced this? A