MY IPOD WONT START AND WONT RESET

Hello, I own the 20g ipod with colour display and picture storage. Recently i had it connected to my computer and it was displaying the do not disconnect message. However it was not doing anything on my computer. I decided to disconnect it and since then when i try turning my ipod on there is and error message with a picture of an ipod with a sad face and exlamation point. I have tried everything to fix it. I have tried reseting it but it does not fix it. I have tried putting it in disk mode and connecting it to my computer but it does not respond. It does make the beeping noise when i connect it in disk mode but does not show up on my computer. If you have any suggestions on how i could fix this problem i would greatly appreciate it. Thank you

Looks like I might have found the solution on a youtube comment:
R.O:
"Plug into you laptop first, whichever set up you use that has iTunes, i know it won't read it, don't even open iTunes as of yet. Do the typical reboot "Menu +Center button at the same time" and hold it, DONT LET IT GO like we were told, when the apple pops up.. KEEP HOLDING IT it will make a new ding sound I've never heard before. and since its hooked to you laptop already an error message pops up and says apple will need to download something to repair your iPod. I when u see that that when i let reboot buttons go. hit ok on the laptop something downloads for like 20 seconds then the iTunes icon hops around when you open it it has a screen with an iPod classic on it and says "Software version blah blah, iTunes will check for an update on such n such date" AND FINALLY there's a "Restore" button. click that and you will be back to square one with your iPod. Renaming , adding all the music on it, but it will work again, finally. "
I had to do it twice, because my mac froze the first time, but its recognized it now and is downloading the software as we speak...
Now I've clicked the restore button and it's restoring... I'll post again if its a success, otherwise assume failure.

Similar Messages

  • IPod wont start and wont reset

    Yesterday my 80 gig 5th generation iPod wouldnt play any songs and I reset it. Once I turned it on, the apple logo appeared then the iPod told me to hook it up to iTunes to restore the iPod. After I hooked it up a red X appeared. I tried what the site says, but nothing is working.
    What should I do?

    Looks like I might have found the solution on a youtube comment:
    R.O:
    "Plug into you laptop first, whichever set up you use that has iTunes, i know it won't read it, don't even open iTunes as of yet. Do the typical reboot "Menu +Center button at the same time" and hold it, DONT LET IT GO like we were told, when the apple pops up.. KEEP HOLDING IT it will make a new ding sound I've never heard before. and since its hooked to you laptop already an error message pops up and says apple will need to download something to repair your iPod. I when u see that that when i let reboot buttons go. hit ok on the laptop something downloads for like 20 seconds then the iTunes icon hops around when you open it it has a screen with an iPod classic on it and says "Software version blah blah, iTunes will check for an update on such n such date" AND FINALLY there's a "Restore" button. click that and you will be back to square one with your iPod. Renaming , adding all the music on it, but it will work again, finally. "
    I had to do it twice, because my mac froze the first time, but its recognized it now and is downloading the software as we speak...
    Now I've clicked the restore button and it's restoring... I'll post again if its a success, otherwise assume failure.

  • My ipod is displying apple logo and wont start up, hard reset leaves it the same, disc mode works but iTunes doesnt "see" it even if the computer does.

    "My ipod is displaying apple logo and wont start up, hard reset leaves it the same, disc mode works but iTunes doesn't "see" it even if the computer does."
    It worked two days ago fine, for two years, until I installed this newest iTunes update, then for one day it kept on freezing and going to apple logo screen mode, then today it only goes to that screen and wont start up at all.
    I've tried the hold down two buttons hard reset, that doesn't help. I've tried disc mode... but iTunes doesn't "see" it even if the computer does.
    This is a pristine ipod, never exposed to adverse conditions, never dropped, never wet, and it worked perfectly two days ago.
    Can I factory reset it somehow? (considering itunes can't "see" it)
    [Ipod classic 160gb less than two years old.]

    Looks like I might have found the solution on a youtube comment:
    R.O:
    "Plug into you laptop first, whichever set up you use that has iTunes, i know it won't read it, don't even open iTunes as of yet. Do the typical reboot "Menu +Center button at the same time" and hold it, DONT LET IT GO like we were told, when the apple pops up.. KEEP HOLDING IT it will make a new ding sound I've never heard before. and since its hooked to you laptop already an error message pops up and says apple will need to download something to repair your iPod. I when u see that that when i let reboot buttons go. hit ok on the laptop something downloads for like 20 seconds then the iTunes icon hops around when you open it it has a screen with an iPod classic on it and says "Software version blah blah, iTunes will check for an update on such n such date" AND FINALLY there's a "Restore" button. click that and you will be back to square one with your iPod. Renaming , adding all the music on it, but it will work again, finally. "
    I had to do it twice, because my mac froze the first time, but its recognized it now and is downloading the software as we speak...
    Now I've clicked the restore button and it's restoring... I'll post again if its a success, otherwise assume failure.

  • My ipod wont start and itunes wont recodnize it, what happened and how do i fix it?

    I recently went to: settings, general, reset, and erase all data and settings, now my ipod wont start and itunes wont recodnize it, what happened and how do i fix it?

    - After being connected to a charging source for half an hour, reset the iPod and then connect to your computer and it if appears in iTunes restore the iPod via iTunes.
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next see if recovery mode will allow a restore. For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • My ipod 5 froze and wont work or anything and my home button doesnt work so i cant soft reset or anything does anyone know what to do about this?

    my ipod 5 froze and wont work or anything and my home button doesnt work so i cant soft reset or anything does anyone know what to do about this?

    Try:                                               
    - iOS: Not responding or does not turn on           
    Ignore the reset and when it says plae the iPod in Recovery mode
    Place the iPod in recovery mode using one of these programs:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    or
    http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:       
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • Macbook wont start and makes ticking noise

    The subject line says it all. My macbook wont start and it makes clicking noises from inside the case, kind of like a watch. The display turns on and the chime goes when it starts, but the screen stays white and nothing happens.

    You can run diagnostics from the OSX disc. Insert disc one and while it is booting hold down the d key. This should take you into diagnostics.
    You might also try to reset PRAM AND PMU first.
    SMC/PMU Reset
    http://docs.info.apple.com/article.html?artnum=303319
    PRAM Reset
    http://docs.info.apple.com/article.html?artnum=2238
    Mort

  • My ipod went black and wont turn on or show up on itunes- please help

    heyy all--my ipod went black and wont turn on it wont show up when i plug it into itunes or even a charger please help me thanks

    Try resetting it by holding the sleep/wake and home buttons simultaneously for 10-15 seconds.
    Hope this helps!

  • My ipod is locked and wont inlock

    my ipod is locked and wont unlock. it says that I have to wait 23,646,570 minutes
    i have no clue what to do need help!!

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
    If you previously synced to the computer then you may be able to recover use of the iPod without erasing the iPod by following the instructions here:
      Disabled Recovery-must use syncing computer.

  • HT1212 my ipod is frozen and wont do anything!!! what do i do????

    my ipod is frozen and wont do anything!!!!!! i need help on restarting it. it is stuck on my lock screen

    If still problem try the remaining items of:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Droped my ipod touch 5g and wont charged (screen cracked)

    Droped my ipod touch 5g and wont charged (screen cracked)

    Apple will exchange your iPod for a refurbished one for this price:
    Apple - Support - iPod - Repair pricing
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • HT1414 my ipod is disabled and wont even allow me to punch in my passcode, what can I do?

    my ipod is disabled and wont even allow me to punch in my passcode, what can I do?

    Hi,
    Follow the instructions in this link:
    http://support.apple.com/kb/HT1212
    Cheers,
    GB

  • Macbook wont start -- have to reset SMC and PRAM

    Hi,
    Sometimes, when I try to switch on the laptop, it wont start.. Nothing happens.
    After reseting the PRAM and SMC, it comes up. But the issue is for the last 3days, I have to do this everytime.
    Can you help me out on this one? Sometimes, I had to wait for like 5-7 minutes and then I have to switch on the laptop after reseting.
    I dont know, whether it is affecting my laptop h/w.
    I bought this 5months ago. its Macbook Air Mid 2013 model.

    Hello there, tcpipv6.
    The following Knowledge Base article offers up a good number of steps to try for troubleshooting issues with your MacBook not turning on:
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/TS1367
    If your computer won't turn on, try each of these steps:
    Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
    If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
    Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
    Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
    If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
    MacBook Pro: How to remove or install memory
    MacBook: How to remove or install memory
    Mac Pro: How to remove or install memory
    Mac mini: How to remove or install memory
    iMac (27-inch, Late 2012): Installing or replacing memory
    iMac: How to remove or install memory
    Reset the SMC.
    If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • My ipod switched off and wont start now. what should i do?

    Ipod went off on its own and isnt starting now.

    After conncting to a chargng source for half an hour:
    - Reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next try connecting it to your computer.  If iTunes sees the iPod, restore the iPod via iTunes
    - If iTunes does not see the iPod. see if placing the iPod in recovery mode will allow iTunes to see the iPod so you can restore the iPod. For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    - Make an appointment at the Genius Bar of an Apple store

  • My ipod wont start, and makes a kind of noise. what should i do ?

    my ipod will not start and it makes a kind of noise, what can i do ?

    Edmond...
    Make sure the battery is charged and try the 5 R's >  iPod classic Troubleshooting Assistant

  • OS wont start up, PRAM reset not working :(

    Hey all,
    I came home one day to my dual 1.8 power mac frozen and fans
    blowing on high. I shut it down, and when starting up...I just got thegray screen with the apple logo, nothing else. I read through the support advice and after multiple combinations of SMU, PRAM, NVRAM
    resets, I was able to FINALLY get OS up and running. As soon as I shut
    it down, the start up issue began once again. After spending 20 min on
    the phone with tech support, learning about holding down the power
    button and waiting for the high pitch tone,resetting the PRAM( 4 - 5x)successfully (but only after many failed attempts) with the option-command-p-r key hold and then performing an archive and reinstall...it all happened again after using the computer for 1/2 the day.
    Except now (as before) I cant seem to reset the PRAM no matter when I time the command-option-P-R or in what sequence I do it in. Ive plugged/unlplugged, waited to hold/immeditately held the keys down, pushed the SMU
    button on the board/didnt push the button, opened firmware page and
    reset all and tried it from there...nothing reproduces the multiple
    chimes and PRAM reset I was able to do the 2 previous times this
    occured. I even went out and bought a new battery for the
    board(installed correctly)and nothing is helping. When holding the
    command optionp r keys, I dont even get the grey screen with the apple. If I leave the keyboard alone and perform all other possible resets...the gray apple appears, no other graphics show up, and definitely never get the
    spinning gear...just a steady increase in fan speed the longer I let it
    sit. It's like the PRAM is not able to reset, and when it
    does, all is good. The timing of the push and hold on the keys seemed
    to be crucial the last 2 times, some time after the chime, but before
    thegray screen. The tech associate told me to push and hold them immediately...that has never worked.
    Any thoughts anyone? Is there another way to reset the PRAM? Any help or advice would much appreciated.

    Alright. Here's the update.
    The computer continued to give me startup issues. Unfortunately,
    the logic board pressing must have been coincidental. And an archive install of 10.4 didnt help. The machine is
    definitely behaving erratically. It starts up when it decides, I seems
    to cycle through few and many (50) startup attempts . I recently backed
    up all my data, erased my drive, and did a clean reinstall. my last
    hope that this is a software issue was about to be
    tested. And sure enough, the computer worked well for 24
    hours.When I was about done updating OS 10.39 with 2007-2008 security
    update when suddenly...frozen again. I've read a few horror stories about this update so I wont make that mistake again.
    It then took me close to 100 attempts to get the **** thing to boot, but I did...attempted
    to reinstall windows and during the process or loading disc 2, the
    machine just went to sleep. Never has this occured. I had the fans out
    of the machine and felt the problem may be temperature related. SO now im
    back to trying to start it up again. Anyone know how to startup to CD
    from open firmware? Besides the usual mac-boot, or holding down C at startup? Is this sounding more like a power supply issue to anyone? Thanks. Gonna try and part this thing out if I cant narrow down the problem.
    I have already given up on this machine and just bought at macbook pro from Feb 08 on amazon. Im definitely getting apple care. I was so close to going back to PC. Grrrr.

Maybe you are looking for

  • How do i create a new icloud

    how can i reset a icloud and make a new one

  • Deleting task in Gantt chart - TaskId = 0

    Hi all, In JDeveloper 11.1.1.6, Project Gantt chart contains few simple tasks (with TaskId, start date, end date). When I try to delete some task, dataChangeEvent.getTaskId() throws "java.lang.IndexOutOfBoundsException: Index: 0, Size: 0" in my manag

  • NOKIA 5530 need help...

    Hello everyone .. I can somehow fix my Nokia 5530 XpressMusic phone? I am installing software suddenly my phone to power down and when I try to turn on the phone menu button lights up and shuts down! and do not go on .. anyone can help me? which prog

  • LR 3 Requests

    Before LR 3 is locked down some of my requests from the Flickr LR forum, mainly workflow issues rather than feature requests, so hopefully pretty easy to implement - it's about making LR a faster to use software more than anything else, a lot of this

  • ConcurrentModificationException from jsp

    Loadtesting 5.1, SP4 - I got a few of these:           Thu Aug 17 16:36:06 GMT+00:00 2000:<E> <ServletContext-General> Servlet           failed with Exception           java.lang.ClassCastException:           com.sun.java.util.collections.ConcurrentM