MY IPOS IS STUCK IN RECOVERY MODE..CONNECTING TO ITUNES APPEARS ON MY IPOD TOUCH HELPP!!

HEY, EVERYONE..I NEED HELP!! MY IOPD WORKED FINE YESTERDAY BUT WHEN I TRIED TO UPDATE IT IT WAS GOING GREAT BUT THEN IT SAID HRDWARE COULD NOT BE INSTALLED..SO IT PUT MY IPOD IN RECOVERY MODE NOW..I TRIED LOOKING FOR IT IN MY USB PORTS AND I FOUND 2 BOTH THE SAME ONE HAS AN YELLOW!! MARK ON IT.BUT IT'S NOT SHOWING UP ON ITUNES AT ALL I TRIED POWER AND HOME BUTTON NOTHING!! I TRIED JUST ABOUT THE USUAL I HAD NO RESULTS CAN
ANYONE HELP PLEASE..THANK YOU!!

Restore the device.

Similar Messages

  • My IPad is stuck in recovery mode and now ITunes wont recognize it, what do I do? Keeps giving me a long error message.

    My IPad is stuck in recovery mode and now ITunes will not recognize it, it just gives me this long error message. What do I do, I've uninstalled and reinstalled ITunes.

    Check USB connections
    Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.

  • IPad1 stuck in recovery mode with and ITunes cannot restore with an error code of 11?

    I tried to update to IOS 4.3.4 today but now my iPad1 stuck in recovery mode with and ITunes cannot restore with an error code of 11?
    (With the old discussion groups it was easy to see where other people had similar problems, these new groups seems clunky in comparison)

    OK, fixed it by using SHIFT+RESTORE to load the iPad1,1_4.3.4_8K2_Restore.ipsw  file in directly from the
    C:\Documents and Settings\<user name>\Application Data\Apple Computer\iTunes\iPad Software Updates
    folder.
    No idea why the upgrade to 4.3.3 failed in the first place and no idea why iTunes was not clever enough to just do it by itself when it detected that there was a problem in the first place.

  • How do I get an unlocked iPhone 3GS out of recovery mode (connect to itunes error) on screen. Cannot do anything on phone until problem is fixed ...

    After putting phone into DFU mode and attempting to restore and update the phone, at the end, an error message came up saying: "the iPhone could not be restored. An unknown error occured (1)."
    How do I go about fixing this problem. I need to get my phone out of this (connect to itunes) mode. Everything I've tried does not work ! By the way, I have the latest version of itunes .. (iTunes 11)

    Error 1 basically means you need to try two more times, and if the issue remains unresolved, contact Apple Support.
    Resolve specific iTunes update and restore errors - Support - Apple
    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.

  • IPod in Recovery Mode? New iTunes has made my iPods useless.

    I did a search and found others with the same problem, but no solutions. With iTunes (downloaded yesterday) neither of my iPods will work. I have a 30gb Video iPod and a third generation 20gb iPod. Both worked fine before I upgraded, now neither will work with iTunes on my work PC.
    I have tried the "5 Rs" and it did nothing but wipe all the data off my video iPod I've uninstalled iTunes, deleted all associated folders, and deleted all registery entries that reference iTunes or iPod; I must have missed something though, because when I reinstall iTunes, it somehow still has all my library data grrr.
    Any thoughts?
    I happened to have just built a new PC at home (different from the one I'm having the problems on) and with a fresh OS and file system, the iPods work with the new iTunes, but not on my older work PC. Obviously I'm missing some file that needs to be deleted, otherwise the library info would be gone and I'd have to add files to my iTunes again, but I'll be damned if I can find the file.
    Any help would be greatly appreciated. Here is my iPod Diagnostic info from my 20gb 3rd generation iPod:
    -----------------PASTE---------------------
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Dell Computer Corporation Precision WorkStation 450
    iTunes 7.0.1.8
    iPodService 7.0.1.8 is currently running.
    iTunesHelper 7.0.1.8 is currently running.
    Current user is an administrator.
    Connected Storage Devices:
    IDE\DiskQUANTUMFIREBALLP_AS40.0_______________A1Y.1500, Bus Type ATA, Bus Address [1,0]
    IDE\DiskST380023A______________________________3.33___, Bus Type ATA, Bus Address [0,0]
    USBSTOR\DiskApple__iPod___________1.53, Bus Type USB
    Universal Serial Bus Controllers:
    Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2, PCI bus 0, device 29, function 0. Device is working properly.
    Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4, PCI bus 0, device 29, function 1. Device is working properly.
    Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7, PCI bus 0, device 29, function 2. Device is working properly.
    Intel(R) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD, PCI bus 0, device 29, function 7. Device is working properly.
    No IEEE 1394 Host Controller found.
    The last connected iPod serial number: 4J609RQ0TXK.
    ---------------END PASTE----------------
    Thanks,
    Dale
    Dell Computer Corporation Precision WorkStation 450   Windows XP Pro  

    I had the same problem when connecting my 60GB iPod with iTunes 7, but I could get through it.
    I cannot explain precisely what the cause was, however this is what I did:
    1) uninstall iTunes 7 from Control Panel, then reboot;
    2) connected iPod to PC without iTunes (mainly because I had all my summer pictures stored in it and wanted to copy them in a safer place, which I succeded at)
    3) disconnected iPod from PC (with Safely Remove HW)
    4) installed again iTunes 6.x (found link to download setup.exe in one post in this forum)
    5) connected iPod: everything ok
    6) installed iTunes 7 with iPod connected (but iTunes 6 obviously closed): after installation it prompted that iPod needed to have SW upgraded to 1.2, which it did in the usual way
    (actually, I had no intention to install iTunes 7 again, but some podcasts I had found in the Store did not sync "because iPod SW is too old")
    Hope this helps.

  • "cannot connect to itunes store" from my ipod touch 4thgen over wifi

    I have tried setting my restrictions to allow, making sure my wifi connection is solid. I can access every other app that uses the internet except the itunes & app store apps on my ipod touch. I looked in settings and it has my login information from my last sync on windows. My wifi settings; ip address starts 10.0.xxx.x. Has anyone else encountered this and how to fix this connection issue? Thank You.

    Two things to try.  Please reply with what works.
    1: Turn on Airplane mode, then turn it off again.  This resets internet related settings.
    Does it work?
    2:  Changing the DNS in Setting, Wi-Fi, DHCP tab, DNS , replace with 8.8.8.8 (Google) or 8.8.4.4 (Google)
    Does it work?

  • How do I get out of the Connect to Itunes screen on my iPod Touch?

    How do I get out of the screen with the Itunes logo and the usb port to connect it to my computer? Earlier today I planned on updating my iPod Touch 5g to
    ios 8 and I had just enough space left to update it. After the update was verifying, it put me on the screen to connect my ipod to iTunes, and every time i try to reset the ipod, it wont let me out of the screen. I don't want to update to ios 8 anymore, because everytime I try to restore the iPod, an error occurs. I am basically being forced at this point to update it, is there any way back to normal ios 7? Please help

    Hi angelaa5508,
    If you have issues with performing the update to iOS 8 you may want to use the steps in the following article to troubleshoot -
    Resolve iOS update and restore errors in iTunes
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Windows 7 - USB Connection - Windows & iTunes can't see ipod Touch

    Hello there,
    I've gone through the 5 Rs, and tried associated articles there to see what's going on, but basically...
    My iPod touch has stopped wanting to sync with my Windows PC. Over the past two months, I've found iTunes hangs when connecting the ipod touch (just freezes, can't move the window, and then 'frees up' after about 60 seconds.)
    The iPod is connected okay - it's charging - it's just neither iTunes nor Windows spot it's connected.
    I've tried a variety of ports, cables, etc. I've even reinstalled windows on my PC (drastic, I know, but I was going round in circles, and that's the only thing I didn't have left to do!)
    One interesting thing; I can see in the Device Manager that when I plug it in, the Apple Mobile Device driver DOES show in the USB Devices area; so on some level, Windows is spotting it is there - it's almost like it's doing an internal dialogue.
    "Right then - Apple Mobile Device Driver, done. USB is receiving power, so I'm charging. And now... talk to the disk system in Windows and iTunes itself.... Nah, I'd rather do nothing."
    Any other suggestions and behaviours? I've looked into my security software (but this would only effect iTunes, not the Windows level, plus remember, the driver is spotted and starting - it just isn't going any further...)

    I haven't installed that hotfix yet, since it hasn't failed again just yet - no doubt it'll do so tomorrow though grins
    Without a word of lie, one of the things that used to get me wondering about the nVidia thing was intermittency of the various symptoms. The way that you're not getting trouble all the time is what is keeping me wondering about it for you.
    When I was doing a lot more troubleshooting of them, the other things I'd be seeing a lot (that I can recall off the top of my head) would be device timeout messages, "disk could not be read or written to" messages, and occasional blue screens. But that was back in the early version iTunes 9.x days, so the messages might have changed up a bit.
    (Most brand name PC models with nVidia chipsets started shipping with the hotfix preinstalled after a while, and manufacturers like HP shoved links to it on their drivers and downloads pages to catch shipped units without the preinstalled hotfix. So it's a lot rarer nowadays. Tends nowadays to only catch folks with custom systems, or folks who've done Windows reinstalls and haven't caught up again on the hotfixes they've lost.)

  • Cannot connect to itunes pairing record missing - ipod touch

    restored factory settings on my sons ipod and now cannot connect to itunes
    am not a very popular mom at the moment .....
    can you help please!!!!!

    See these previous discussions:
    error:  "pairing record is missing"
    Re: I can't connect my new 4th generation ipod touch to itunes. it says can't connect because no pairing record found

  • Hi so my ipad is stuck in recovery mode.  Once I connected to itunes to install the ios 8 software it says that its eligible for the request build and I tried the sudo nano command and that didn't work either. Please help thanks!

    Ipad mini stuck in recovery mode.
    My itunes is up-to-date.
    Sudo nano command is not working.

    yes i am sure. This are the exact words... "The iPad "iPad" could not be restored. The disk you are attempting to use is full. (Removing files and emptying the recycle bin will free up additional space". i tried some options, hard reset, redsnow, tinyumbrella but still it's stuck.

  • My iphone 4 stuck in recovery mode after updating to ios5.1

    i got my iphone 4 updated to ios 5 months ago and it was successful. However, i was updating my software to ios 5.1 using the phone itself and it went into recovery mode after that. The moment before updating it was fine and now it stuck in recovery mode, showing the itunes logo and usb cable.
    I connected my phone to the itunes on my laptop and it shows that my iphone is in recovery mode and must be restored.
    I've tried restoring it but after the restoration cycle was done, it pop up a window saying there's an error (1) occuring and my iphone was unable to be restored.
    I've tried it again and again for hours from yesterday evening until now but it's still the same. Anyone can help? I got no more phone to use at the moment.

    download a program called RecBoot, very easy to use, connect your iphone and click on "exit recovery mode" and it will restart normally. I had the same problem as you, but I solved it with this program.

  • HT201210 stuck on recovery mode

    plz helpmy iphone4 is stuck on recovery mode. and my itunes will not find it

    Start with this: http://support.apple.com/kb/HT1808
    Then tell us something that might be useful for diagnosis, like what kind of computer and operating system you have, how you are connecting the phone to your computer, any error messages (including the error nimber) or other symptoms.

  • Ipod touch 3g stuck between recovery mode and apple sign

    Hello everyone,
    I was hoping someone could assist me... I have an iPod Touch 3g (32gb) that is stuck in recovery mode.  Once in a while, it'll go to the start up Apple Logo... but then it'll go back to the recovery mode/connect to iTunes screen.  To add to the fun, sometimes it would go into regular iPod mode and I can surf the net, and do regular things.  However, when it goes into that mode... the screen would flicker between the regular screen and a greyish screen.  At that point, I shut the iPod off... but when I do that the iPod will turn itself back on (yes, it's strange).
    Anyone with any suggestions would be appreciated.
    I have tried to recovery the iPod on iTunes... once it "succeeds", it goes back telling me to recover the iPod again so it's basically looping.  I've tried to recover this device with another computer with iTunes... same result.  I can't get this thing on DFU mode.. as it won't respond to it.  I've also tried various USB cables.
    Is there any hope? (or any ideas in terms of what could be causing the issues)
    Thanks a bunch.

    Thanks, I'll try it out, and update here.  It might take a little while for the battery to drain without being used.

  • Stuck in recovery mode and turns off after 30 seconds

    Hi everyone,
    I have done my research but no one seems to be having the exact same problem that I have. Here's what happened:
    When I was updating the firmware of my Ipod Touch 4g iOS to 4.2 in a MacBook Pro, it suddenly cut the USB power because it was low on battery. After which, my Ipod now only goes from the apple logo to recovery mode (connect to itunes screen)then turns off after about 30seconds.
    It still gets recognized in iTunes but it doesn't stay powered on long enough for something to be done (restore, iRecovery, etc.). I have tried doing the DFU to recovery mode, holding the home button when connecting the cable, etc.
    I have everything backed up so restoring is not an issue. I just need it to work.
    Help!

    Not sure if this is the same problem exactly but all of a sudden my phone was stuck in headphone mode & wouldn't make sounds through the speakers at all. This was because of a dirt/dust buildup in the port. What I did was hold the phone & a flashlight in one hand & scraped out the crap with a safety needle/pin thing. This was very useful because I could exactly see where the stuff was & eventually I dug it all out. Works fine now! Hope this helps you/anyone else having a similar problem

  • My iPod touch is stuck in recovery mode and won't restore?

    Okay my Ipod Touch is stuck in recovery mode and will not restore because "the ipod software update server cannot be contacted". I have tried to restart my computer, restart my ipod, tried different computers, and re-intalled AND updated my itunes and it still will not restore. It is stuck on the picture of the usb cable pointing to itunes and won't do anything else. I'm trying to restore it because my memory was full and I wanted to clean it out and now the ipod is useless, please help me restore it!

    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - For one user uninstalling/reinstalling iTunes resolved the problem
    - Try on another computer/network
    - Wait if it is an Apple problem

Maybe you are looking for

  • LR 4.2 crashes on Windows 7 (32 bit)

    Hello, I have serious trouble with LR 4.2 (although I had similar problems with 4.1). LR simply crashes from time to time (mainly when I edit the files), I receive message that the program stopped responding and must be closed. Please provide me with

  • I keep getting  (error code -8003) when I try to empty my trash. Any idea how to overide it?

    I cannot empty my tarsh and keep getting  (error code -8003). Is there any way to override it and get ride of my trash?

  • Can I twirl down (and up) a group of folders?

    Is there a way of selecting a bunch of folders in a column and then twirling all of them down but only one level in? Option+double click can open and close a group of folders and that would be more or less the idea but the windows are stacked on top

  • Problem in Activation of Workflow

    Hi, We are using a workflow when we test the workflow through SBWP then we get activated version as 'X'. When we test  workflow through SWUS, we get activated version as 'Y'. Can any one tell us what can be the reason for the same. Regards, Sandeep G

  • Upload failure. Lost important photos - greyed out subfolder

    Uploaded many photos but it created a greyed out subfolder with no photos behind.  Nothing in iphoto, recovered file.  The subfolder created by date shows a palm tree in grey but nothing behind.  How can I recover these photos.