My isight camera is showing not connected

i tried making a facetime call but its telling me camra not connected?

If restarting Mac doesn't fix the trouble,  Troubleshooting FaceTime for Mac may help you.
If not, try How to Troubleshoot iSight.  Test more than one Apple app in more than one User Account.
If none of the above helps, Reinstall OS X.
Message was edited by: EZ Jim
Mac OSX 10.9

Similar Messages

  • HT3964 my built-in isight camera will still not work on my macbook pro after completing smc reset.  The green light comes on but no video.

    my built-in isight camera will still not work on my macbook pro after completing smc reset.  The green light comes on but no video. 
    Any Suggestions?

    Restart the computer.

  • UCCX 10.5 Real Time Report shows "Not Connected"

    Hi,
    UCCX 10.5 HA over LAN.
    As per the title, RTR shows Not connected for both nodes and no data shown for all reports. all services are In service in both nodes. 
    Any Ideas?
    Regards.

    Hi Mohamed,
    Are you accessing this via the IE or FF? If so which version?
    The Real time reporting on UCCX connects to the RMI port 6999 to pull the information on the Engine. If there are no port blockages or if there are no issues with the browsers, then it is a problem with the configuration files in root holding this information which needs in depth analysis.
    A restart of the Engine also should help. I know that everything is IN SERVICE, but I have noticed a lot of issues on UCCX 10.5 when there are stuck calls on the system, it impacts RTR with the midnight stats reset.
    The reset of the Engine is bound to clear all the stuck calls in the system and this may be a side effect of the stuck calls on the system especially if the RTR was working before you noticed the problems.
    Regards,
    Arundeep

  • I have a mac os x snow leopard. my problem is that when i go to the ethernet settings it shows 'not connected'. i called the internet person even he couldn't fix it PLEASE HELP!!!!!!!!!!!!!!

    i have a mac os x snow leopard. my problem is that when i go to the ethernet settings it shows 'not connected'. i called the internet person even he couldn't fix it PLEASE HELP!!!!!!!!!!!!!!

    System Preferences > Network > Ethernet? If that shows "not connected" that is all your Mac knows. As far as it is concerned there is no cable connected to the port on your Mac, or the other end of the cable is either disconnected or connected to something that is broken.
    Try another cable. If the cable is broken you will also get that status message. If you have exhausted all of these possibilities, the only remaining cause is an inoperative port on your Mac.

  • My photo smart 5500 is showing not connected but is!

    Have tried everything suggested,run all tests and shows wifi connection as 4 out of 5 , printed from iPad with no problem but still shows not connected in eprint centre...have tried removing and re adding,turning on/of etc any ideas...have three pictures waiting in print queue !

    Very good then, here are the instructions to start scratch.  I promise, if everything like the website and printer are working correctly, the whole process should take 10-15 minutes and hopefully not all day. I really hope this helps make everything communicate perfectly again.  The reason I am going to have you remove web services is because it seems the email is what is messing up.  Web services has nothing else to do with Airprint or "knocking the printer off the network" so-to-speak.  I just want to get eprintcenter.com to show connected and for you to be able to use your ePrint functionality to the fullest.
    Starting at the printer, press the ePrint button and go into your ePrint settings.  Follow the prompts to remove web services and the printer returns back to the main printer screen.  Press the ePrint button again to enable it again.  It will ask you about auto-updating and if you want to enable web services, so you will definitely want to allow for all of this in order for this to work.  Within two minutes, a new page will print off that will have a printer code on it.  This means your previous email is gone.  If your printer gets stuck on the "Downloading from Web" screen through this process, it is okay to just turn the printer off and back on again.
    Go to www.eprintcenter.com and sign in with your personal email address (which I know you know but some others may not). You may see your printer here and now it is definitely not connected so click the Red X to remove it from here.  Chances are you will see an option to enter in a printer code but if you do not, then look for the words "Add Printer."  It will either be a tab or a blue box in the same area where you clicked "Sign In,"
    Enter in your new printer code and customize the printer's email address. I would always tell people to leave the ability for everyone to send to your printer open for now.  Only give the customized email to people you trust and never type it in a marketing website and you will not have anything to worry about.  After you click the last "Save" button, if you see "Not Connected" click the gray "Refresh" button and it should say "Connected and Ready" now. 
    Let me know Wednesday how it goes and if it still says not connected, I will walk you through setting a static IP for the printer from the embedded web server but I really think this will work.
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • IPhone 3G showing "Not Connected" next to wifi

    Hi,
    I have always been able to connect to my wireless network (and friend's for that matter), however, today Wifi is showing "Not Connected" as if there are no wifi networks in sight. All the computers and iPhones in my house are connecting to internet using Wifi. I am stuck with 3G.
    All the iPhones in my house are on firmware 3.1.2. I find no reason to upgrade to 3.1.3 for the lack of features.
    Please help.
    Thanks,
    Adam

    I have tried Reset Network Settings which did not seem to help... I have also gone to the Wifi menu, clicked "other" and then typed in my network's SSID, but it says the network is unavailable.
    Thanks.

  • Email showing not connected (bluetooth)

    Good day,
    I recently purchased a Z10 with Bell, and have a BMW X3, 2012.
    Text message, contacts, calls all work fine.....however no emails make it to the vehicle.
    When I check the setting on the phone, sms/mms show connected however email shows not connected.
    Any ideas? 

    Hey,
    Welcome to the BlackBerry® Support Community Forums.
    This may be a compatibility issue, I would suggest checking with car manufactures for more information on Bluetooth compatible smartphones, see here for more information:
    BlackBerry smartphone Bluetooth car compatibility
    http://www.blackberry.com/btsc/KB29616
    Thanks.
    -HB
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Printer showing not connected

    My  HP photosmart 7520 series printer has been fine for 8 months now in control panel it shows NOT CONNECTED but it still prints and scans fine. The printer panel shows it connected to network and the the network map in Norton shows it connected and online. Scan doctor says everything is fine. Help

    Hello agroves,
    Welcome to the HP Forums.
    I see that you are having an issue with the printer showing that it is not connected when in the control panel,
    I do have a couple suggestions for you to try in the attempt to troubleshoot this issue.
    First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    The other step is to disable the Norton anti virus protection and then reboot the computer.  Once the computer is back on, check the control panel and see if it still reads that it is not connected.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • My I phone was changed today. I connected to wifi in apple store. Now at home cannot connect  Shows connected then immediately shows Not connected  What is wrong?

    Exchanged I phone at Apple store  . Was connected to their wifi. Now at home it shows connected then immediately shows NOT connected. What is wrong ? HELP

    Hi dadsphone,
    If you are having WiFi issues with your replacement iPhone, you may find the following article helpful:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Regards,
    - Brenden

  • I have a iMac 21.5", with cordless mouse, very often it shows "not-connected" or "connected", at its will, we can't do anything. Changed the battery, no improvement. Now fixed another wired mouse to the system to work. My wire less keyboard working well

    I have a iMac 21.5", with cordless mouse, very often it shows "not-connected" or "connected", at its will, we can't do anything. Changed the battery, no improvement. Now fixed another wired mouse to the system to work. My wire less keyboard working well

    Make the device a favorite.
    Also, I would reset the PRAM and SMC.
    Barry

  • Isight camera in iMovie not showing

    I've been trying to record video with the isight camera in iMovie or iMovie HD and the camera is not showing up.  Skype, Facetime, Quicktime are all fine.  Can anyone help?

    Hello there, bermudatan.
    The following Knowledge Base article offers up great steps for troubleshooting your issue:
    How to Troubleshoot iSight
    http://support.apple.com/kb/HT2090
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Able to access internet yet error message shows not connected?

    Lenovo W520 4270CTO
    Windows 7 Professional SP1 64 bit.
    Each time I connect my laptop to a location other than my (first and original) home office, the network icon in the taskbar shows a yellow triangle with an exclamation mark through it, meaning "Unidentified network, no access". Yet, I have both wifi and LAN connection as evidenced by me being able to post on this forum.
    I have tried to change my location to "home" or "work" to no effect. One of the error messages I get is 'must belong to a home network' in order to change. Well, from what I can understand, a home network is created by and for other Win 7 machines. I am the only one at this location...and I own the network (my new home office location). In another instance where this happened, I had a network engineer at that office location look at the problem and that's where I learned that although the icon shows no connection, it was in fact connected to their wifi.
    It is impacting me because I subscribe to MS Office 365. I have had Microsoft support trying to troubleshoot the problem, inadvertently as I was having trouble connecting my Outlook client to get mail. Since that time, my Office 365 subscription needs activation, but it can't hit the MS license server. Also my Skydrive is not synching. It's definitely been determined (by MS) that it's a local network issue. I don't think it is a network because it happens at other locations.
    I need to get this fixed because my MS office license has expired and it needs re-activation. I have loaded the latest Lenovo wifi driver, thinking that would help (Intel PrOSet/Wireless Software version 16.1.3). Not sure what else to do here. I am going grayer by the day.

    well, first check whether you're connected to the blackberry network...
    how can I check whether myself connected to blackberry?
    Check within the network bars on the phone whether it is showing you 3G, EDGE or GPRS in capital letters...!!
    If not give a hard-reset to the phone (remove the battery put it back once)...
    And if it shows in caps letters then try requesting for services again... how? on the phone desktop > within the search bar > type "Host Routing Table".... search results shows you as "options"... select that & select host routing table... afterwards, hit the blackberry menu button > select register...
    .RoCkInG dUdE.
    Trust Your Technolust | Do not PM for any support
    If a solution received, please hit on to show your support.

  • Safari showing not connected to internet since update

    Hi all,
    Just wondering if anyone is experiencing a similar problem or has a remedy? Basically both my imac and macpro were recently updated with both OS & Safari updates. Since doing so you will often click on a link to a new page and a message will come up saying that Safari could not open the page because we're not connected to the internet. We are as you can automatically go back to the previous page or load other websites. If you click the link about 3 times it eventually opens, but naturally it's very frustrating.
    Any suggestions on what could be the cause? Any help is much appreciated.
    Thanks!

    HI and welcome...
    From your Safari menu bar click Safari / Preferences then select the Security tab.
    Click: Show Cookies.
    Delete all cookies.
    Shut down your Mac, restart, then launch Safari.
    Carolyn

  • IMac isight camera is now not found

    I have been using the iSight camera on my iMac for FaceTime. I have installed the latest security upgrade and now it is no longer recognized.
    I looked in the system information section under camera and it tells me that one is not found.
    I have restarted, zapped the Pram...
    Any ideas? David

    Try K Shaffer's suggestion from http://discussions.apple.com/thread/6770624.
    If SMC reset does not remedy the problem, use these instructions to Reinstall OS X.
    Then check again for the camera in the System Information utility. 
    If you don't find the camera in System Information's "Camera" item,
    click the Hardware's > USB tab and look for it in the USB Device Tree.
    If nothing else works, contact Apple or an Apple-Authorized Service Provider for service.
    Message was edited by: EZ Jim
    Mac OSX 10.10.2

  • While running adgendbc.sh during autoconfig it shows not connected toORACLE

    adgendbc.sh started at Sun Aug 7 16:13:46 IST 2011
    SQL*Plus: Release 10.1.0.5.0 - Production on Sun Aug 7 16:13:46 2011
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Enter value for 1: Enter value for 2: Enter value for 3: Connected.
    ERROR:
    ORA-03114: not connected to ORACLE
    ERROR:
    ORA-03114: not connected to ORACLE
    ERROR:
    ORA-03114: not connected to ORACLE
    We are not able to run autoconfig on apps Tier

    Hi,
    We are getting following error in alert log file.
    ORA-07445: exception encountered: core dump [kopxccc()+92] [SIGSEGV] [Address not mapped to object] [0x000000062] [] []
    We are able to connect in database from application side.
    Detail of adconfig log file
    adgendbc.sh started at Sun Aug 7 16:13:46 IST 2011
    SQL*Plus: Release 10.1.0.5.0 - Production on Sun Aug 7 16:13:46 2011
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Enter value for 1: Enter value for 2: Enter value for 3: Connected.
    ERROR:
    ORA-03114: not connected to ORACLE
    ERROR:
    ORA-03114: not connected to ORACLE
    ERROR:
    ORA-03114: not connected to ORACLE
    ERROR:
    ORA-03114: not connected to ORACLE
    ERROR:
    ORA-03114: not connected to ORACLE
    ERROR:
    ORA-03114: not connected to ORACLE
    ERROR:
    ORA-03114: not connected to ORACLE
    ERROR:
    ORA-03114: not connected to ORACLE
    ERROR:
    ORA-03114: not connected to ORACLE
    ERROR:
    ORA-03114: not connected to ORACLE
    ERROR:
    ORA-03114: not connected to ORACLE
    ERROR:
    ORA-03114: not connected to ORACLE
    ERROR:
    ORA-03114: not connected to ORACLE
    ERROR:
    ORA-03114: not connected to ORACLE
    ERROR:
    ORA-03114: not connected to ORACLE
    ERROR:
    ORA-03114: not connected to ORACLE
    ERROR:
    ORA-03114: not connected to ORACLE
    ERROR:
    ORA-03114: not connected to ORACLE
    ERROR:
    ORA-03114: not connected to ORACLE
    ERROR:
    ORA-03114: not connected to ORACLE
    ERROR:
    ORA-03114: not connected to ORACLE
    SP2-0359: memory exhausted
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
    With the Partitioning, OLAP and Data Mining options
    Params=fnd_jdbc_buffer_min=1
    fnd_jdbc_buffer_max=5
    fnd_jdbc_buffer_decay_interval=300
    fnd_jdbc_buffer_decay_size=5
    fnd_jdbc_usable_check=false
    fnd_jdbc_context_check=true
    fnd_jdbc_plsql_reset=false
    Unique constraint error (00001) is OK if key already exists
    Application server ID already exists for this host - loading..
    ADD executed successfully - /u05/prod/apps/apps/prod_stl-replication/appl/fnd/12.0.0/secure/PROD.dbc
    Trying to update information ...
    Changed GUEST_USER_PWD to GUEST/ORACLE
    UPDATE executed successfully - /u05/prod/apps/apps/prod_stl-replication/appl/fnd/12.0.0/secure/PROD.dbc
    Updating parameters: fnd_jdbc_buffer_min=1 fnd_jdbc_buffer_max=5 fnd_jdbc_buffer_decay_interval=300
    Changed GUEST_USER_PWD to GUEST/ORACLE
    UPDATE executed successfully - /u05/prod/apps/apps/prod_stl-replication/appl/fnd/12.0.0/secure/PROD.dbc
    Updating parameters: fnd_jdbc_buffer_decay_size=5 fnd_jdbc_usable_check=false fnd_jdbc_context_check=true
    Changed GUEST_USER_PWD to GUEST/ORACLE
    UPDATE executed successfully - /u05/prod/apps/apps/prod_stl-replication/appl/fnd/12.0.0/secure/PROD.dbc
    Updating parameters: fnd_jdbc_plsql_reset=false
    Changed GUEST_USER_PWD to GUEST/ORACLE
    UPDATE executed successfully - /u05/prod/apps/apps/prod_stl-replication/appl/fnd/12.0.0/secure/PROD.dbc
    Updating Server Security Authentication
    java.sql.SQLException: Io exception: Invalid number format for port number
    Database connection to jdbc:oracle:thin:@host_name:port_number:database failed
    Updating Server Security Authentication failed with exit code 1
    adgendbc.sh exiting with status 1
    ERRORCODE = 1 ERRORCODE_END
    Trying to update information ...
    Changed GUEST_USER_PWD to GUEST/ORACLE
    UPDATE executed successfully - /u05/prod/apps/apps/prod_stl-replication/appl/fnd/12.0.0/secure/PROD.dbc
    Updating parameters: fnd_jdbc_buffer_min=1 fnd_jdbc_buffer_max=5 fnd_jdbc_buffer_decay_interval=300
    Changed GUEST_USER_PWD to GUEST/ORACLE
    UPDATE executed successfully - /u05/prod/apps/apps/prod_stl-replication/appl/fnd/12.0.0/secure/PROD.dbc
    Updating parameters: fnd_jdbc_buffer_decay_size=5 fnd_jdbc_usable_check=false fnd_jdbc_context_check=true
    Changed GUEST_USER_PWD to GUEST/ORACLE
    UPDATE executed successfully - /u05/prod/apps/apps/prod_stl-replication/appl/fnd/12.0.0/secure/PROD.dbc
    Updating parameters: fnd_jdbc_plsql_reset=false
    Changed GUEST_USER_PWD to GUEST/ORACLE
    UPDATE executed successfully - /u05/prod/apps/apps/prod_stl-replication/appl/fnd/12.0.0/secure/PROD.dbc
    Updating Server Security Authentication
    java.sql.SQLException: Io exception: Invalid number format for port number
    Database connection to jdbc:oracle:thin:@host_name:port_number:database failed
    Updating Server Security Authentication failed with exit code 1
    adgendbc.sh exiting with status 1

Maybe you are looking for