My iSync doesnt work at all, please help

Ok, my iSync does not work anymore. Everytime i open it, it freezes up And have to force quited it all the time. Is there anyway to fix this problem? Thx.

Hi coffeee,
Perform a backup of your hard drive. Then do an Archive and Install. Then run Software Update, until there are none left. Make sure your firmware is up to date. Then Repair Permissions. This would be an easier task then trying to figure out what is wrong with iSync. Plus your system would be in top shape. Afterwards, when you know it's not needed, you can delete the Previous System folder.
You first asked bouth this I think Friday. By now you could be using iSync. I find the process of Archive and Install to be an easy fix for any glitch, and much less stressful then troubleshooting.

Similar Messages

  • Touch screen doesnt work at all, Please Help

    I have a HP Pavilion touch smart 20 all in one PC.  I have had my computer for a few months and everything was working.  I really never used the touchscreen but I tried it out and it worked fine.  Just recently I tried using the touchscreen and it doesn't work at all no response to touch.  My wireless mouse and keypad work fine still.  PLEASE HELP.  I am running 64 windows 8

    To get your touchscreen to function normally, you can try out the following options:
    (Note: Follow these options in the same order as they are given)
    1. Clean the screen
    Follow these steps:
    a) Turn Off your computer
    b) Take a soft, damp cloth and spray some good-quality glass cleaner on it.
    (Important: Do not spray the glass cleaner directly onto your touchscreen)
    c) Wipe the screen gently to remove smudges and dirt that may be present on your screen.
    d) Once done, turn On your computer and see if the touch screen responds now. If it does not, follow the steps ahead.
    2. Perform a complete shutdown (if you have not done this already)-
    Follow these steps:
    a) Press Windows +1 key
    b) Click "Power", then press and hold Shift key and click "Shut Down"
    c) Turn On the computer by pressing the power button
    d) Check if the touch screen responds. If it does not, refer to the next section below.
    3. Configure your touch display settings
    Follow these steps:
    a) In your Windows Start screen, type "Tablet PC Settings" (without quotes) to open Search.
    b) From the results that appear, select "Tablet PC Settings"
    c) On the display box that pops up, click on "Setup…"
    d) Follow the on-screen instructions. By following this process, you are notifying your system to identify your screen as a touch screen.
    e) Now tap your screen to see if it responds. If it doesn't, go to the next point below.
    4. Perform a System Restore
    A System Restore will enable you to roll-back recent changes in your system and take it back to a stage when it was working perfectly. To know how to restore your system, refer to the following HP Support link:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03327545&lc=en&cc=us&dlc=en
    If this does not resolve your issue, go to the next step.
    5. Perform a HP Recovery Manager
    To use HP Recovery Manager on your computer, refer to the following link:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03489643&lc=en&cc=us&dlc=en#N206
    6. If the issue still persists, you need to contact HP Support on the following link:
    http://www8.hp.com/us/en/support.html

  • My iPod will turn on, but will not work at all. (please help)

    ok i know about ipods, and this issue is not something that i have come across. when i plug in my ipod to my pc a screen shows on my ipod saying "do nto disconnect" i dont, i want until it is loaded. then the folder with a "!" pops up, and i read on www.apple.com that i am supposed to try the 5 w's, and i have tryed all 5 w's 3 times each. nothing works, nothing. when i click start and click all programs and go to ipod then i click ipod updater i cannot restore my ipod because a message pops up saying "The attached iPod model is not supported by this application." someone please help me.

    Download and install the newest software if you have not already done so. See my post above for the links. After you have done this, try putting the iPod into disk mode and restoring.
    iPod Updater 2006-03-23
    www.apple.com/ipod/download
    iTunes 6.0.4
    www.apple.com/itunes/download
    Putting iPod into disk mode:
    http://docs.info.apple.com/article.html?artnum=93651
    Restoring iPod:
    http://docs.info.apple.com/article.html?artnum=60983
    Best wishes,
    CG
    PS- What do you mean when you say it will not allow you to right click on it? FYI- Sometimes when there's something going on with your iPod's hard drive, it takes a really long time for the computer to respond to commands for it. So, if you're right clicking and then getting an hourglass, please be patient. You'll get there eventually.

  • Z10 not working at all please help in solving this problem

    Z10 has been stuck in "Preparing Blackberry HUB" mode for hours despite several restarts and battery pulls. Five swipe solution to restarting HUB only results in screen flashing on and off. Frustrated. Any ideas appreciated. Phone calls too not working, cant receive email, text messages or launch applications although preview screen seems to be working.
    Have reviewed other threads for solution with no success. Would rather not use security wipe option.
    Please help in sloving this problem 

    I would start with a Security Wipe:
    To perform a Security Wipe please follow the instructions below. Be sure and use BB Link to make a full backup before proceeding with the wipe:
    http://www.blackberry.com/btsc/KB33591
    Once the wipe is complete you can restore your backup. Keep in mind that data in the backup may be the source of the original problem and restoring it may restore the problem, as well. To alleviate this I recommend not restoring the Settings portion of the backup.
    If that doesn't work then use an autoloader to reload the OS:
    http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • I need help! my usb ports don't work at all, Please HELP!

    I have a t42 and my usb's use to work just fine and now they simply just won't work at all now.  i only used them for my camera and to sync my phone.  if anyone knows what the problem is, please get back to me asap.  more than anything i need to sync my laptop with my phone and vice versa soon.  thanks

    http://forums.lenovo.com/lnv/board/message?board.i​d=T_Series_Thinkpads&message.id=20595&query.id=432​...
    have a read.
    If it does stop working due to hardware failure, then just get a PCMCIA USB card, it works just as fine.  
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Itunes not working at all please help

    ok so when ever i open my itunes it says it has to redownload, after it goes through that it says that to make the operation work i have either restart my computer or restart it later. i have done both and its not working, i dont know whats hte matter with it, oh and if it has anythin to do with it i have Vista

    Hi jayna_lagomarsino,
    If you are having issues with your Apple ID security questions, you may find the following articles helpful:
    Apple ID: All about Apple ID security questions
    http://support.apple.com/kb/HT5665
    Apple Support: Rescue email address and how to reset Apple ID security questions
    http://support.apple.com/kb/ht5312
    Regards,
    - Brenden

  • Email Not Working At All Please Help!

    hey, i just got my black berry today and the email is not working. I go to the email set up page and it brings me to the terms of service but when i click next it says that this black berry already has an account? i do not know what to do. I also have not created account. It hasn't let me and i have clicked the Options/Router  register thing has not worked. I really need help with this

    Venny19 wrote:
    hey, i just got my black berry today and the email is not working. I go to the email set up page and it brings me to the terms of service but when i click next it says that this black berry already has an account? i do not know what to do. I also have not created account. It hasn't let me and i have clicked the Options/Router  register thing has not worked. I really need help with this
    If you go to the setup wizard>Email Setup you should have two choices
    1.  Create/Add
    2.  Use work email account
    If you are wanting the first option  it shouldn't deny you access as you can have multiple accounts.
    The ony reason I can think of would be if you bought the device used and it is max'd out.
    What are the details on your Blackberry?  If purchased new did you activate it at time of purchase?  What steps have you taken to establish service with your provider.
    Наглый пес! Вы должны быть благодарны мы даем Вам возможность проживать в нашем мире!
    BB 9550 Verizon OS 5.0.0.1015 My Storm My Blackberry My Lifeline
    If there is a Theme on my Blackberry, Hedone it!
    If someone successfully helped you with an issue, say thank you by clicking "kudos" in their post and clicking the star.
    Antiquis temporibus, nati tibi similes in rupibus ventosissimis exponebantur ad necem
    If your issue has been solved, please mark the post that solved it for you!

  • HT201210 IOS 7.0.4 updated and now my alarms do not work at all, please help.

    Since the IOS 7.0.4 my alarm to wake up has not been working. It does not go off and when I do wake up (late) it lists the alarms as "12:00am" and "off." I have redone them so many times and still nothing. Suggestions? I have an iphone 4S.

    How do I reset the network settings? Are you referring to the phone or my computuer? I am very dodgy at doing computer things so a step by step process would be very helpful for both the phone and computer please.
    I did set another alarm and this time it did go off. No resetting itself to 12:00am, but I did not ask it to repeat itself either. Still a bit worried though.

  • Hello to everyone!! I have a huge problem and I feel very angry grrrrr!!! My iPhone 4s has iOs 6.0.1 and my wifi doesn't work at all please dear apple do sth!!! help me!!!!!!

    Hello to everyone!! I have a huge problem and I feel very angry grrrrr!!! My iPhone 4s has iOs 6.0.1 and my wifi doesn't work at all please dear apple do sth!!! help me!!!!!!

    Κανε backup στο iTunes και μετά κάνε restore as new. Δηλαδή Settings>General>Reset>Reset all Content and Settings. Οταν τελειώσει θα έχουν σβηστεί όλα. Μην κανεις restore from backup. Δοκίμασε πρώτα νε δεις αν δουλεύει το wi-fi. Αν δεν δουλεύει πας στο service. Αν δουλεύει κάνε restore from backup. Αν το πρόβλημα ξαναεμφανιστεί τότε πρέπει να ξανακανεις restore as new και να το στησεις απο την αρχή. Αν δεν εμφανιστεί έχεις καθαρίσει. Μην ξεχάσεις να συγχρονίζεις επαφές και ημερολόγια πριν το restore.

  • My iTunes, on my computer is not syncing anything at all. We have tried re-downloading it but it does not work. Someone please help me?

    My iTunes, on my computer is not syncing anything at all. We have tried re-downloading it but it does not work. Someone please help me?

    Here:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • Guys how to fix the audio problems of my itouch? The volume bar dosnt exist and the loudspeaker doesnt work. . .Sounds only works in headset  please help thanks!!!!

    Guys how to fix the audio problems of my itouch? The volume bar dosnt exist and the loudspeaker doesnt work. . .Sounds only works in headset  please help thanks!!!!

    Post this in the iPod Touch forum.
    https://discussions.apple.com/community/ipod/ipod_touch
    B-rock

  • Ipad mini, after ios7 upgrade if turn off the mobile data, my carrier gets turned off and wifi doesnt work at all. Its slow and app store crashes everytime. Help me to gowngrade to ios6. This really *****.

    Ipad mini, after ios7 upgrade if turn off the mobile data, my carrier gets turned off and wifi doesnt work at all. Its slow and app store crashes everytime. Help me to gowngrade to ios6. This really *****.

    Tap Settings > General > Reset > Reset All Settings
    Then restart your iPad.
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, then swipe the slider to power off.
    Then press and hold the Sleep/Wake button until the Apple logo appears.
    Downgrading is not an option for an iOS device.

  • Premiere ele. 6, 7, pro 2.0 not working!! Please Help!!

    Whenever I open the above programs, there's this error that says "--- has stopped working. Windows is trying to find a solution to the problem" and there's always no solution. it only happens to adobe premiere on my computer but not photoshop, soundbooth or bridge.
    I've tried reinstalling every single one of them but it still doesnt work.
    Can anyone help?
    vista home premium 32-bit sp1
    Intel quad Q6600 2.4ghz
    4.00 gb ram
    nVidia 9800GT 512MB dedicated RAM
    I don't think this is regarding issues with computer stats because I previously used the software for 3 or 4 times already, but now it just crashes

    Welcome to the forum. Unfortunately, it is the wrong forum. This one is for Premiere, the big brother to PrElements, but before the change over to Premiere Pro.
    You will get a lot more useful input HERE.
    Before you post your question there, please read this ARTICLE (from the PrE Tips & Tricks sub-forum). Also, when you get to the PrElements forum, look through the FAQ's sub-forum, accessed by clicking on FAQ's to the right of the main page. Steve Grisetti has done a good job of putting those back together after the forum change over. He talks about a lot of things that one can do to improve their computer.
    This ARTICLE will help you to troubleshoot your issues a bit more too.
    Armed with info in those articles, plus the info that they suggest you post, someone will be able to help you immediately.
    Good luck,
    Hunt
    PS - since they worked, but do not now, I would first update all audio and video drivers, and also install the latest version of QT Player. Those little tweaks will often repair problems, such as you indicate. See ya' in the PrE forum.

  • Just updated itunes 10.5 and now it won't open at all please help me

    Just updated itunes 10.5 and now it won't open at all please help me

    Already a thread about this problem. Check to see if any of the given solutons here work for you.
    https://discussions.apple.com/thread/3381033?start=0&tstart=0

  • InDesign CS5 is not opening after deactivation/activation. How can I fix this? Illustrator and Photoshop open and are working fine. Please help!

    InDesign CS5 is not opening after deactivation/activation. How can I fix this? Illustrator and Photoshop open and are working fine. Please help!

    First of all, thank you for replying so promptly to my posts this morning!
    I can't remember how I got the software on his computer, but I'm pretty sure it wasn't through migration assistant.
    I was looking into doing an uninstall of InDesign and a fresh install. However, I initially downloaded the CS5 suite digitally and I can't find out how I am able to perform a fresh install of InDesign. Do you know where I find this info or gain access to download just InDesign again? I can't seem to find anything in my Adobe account that shows where I might do another download.

Maybe you are looking for

  • Problem with BIS after upgrading to v5.0.0.822 (1385) :(

    Hi all, I have a Bold 9000 and after upgrading software to v5.0.0.822 (1385) my BIS start working. I do have BIS conection, however the service is turned off on the phone. How can I activate this? If try to acess to the web the web browser tries to c

  • Problem with Transport Layer

    Hello every body, We are doing an upgrade from 4.6C to ECC6. we have imported a transport request from 4.6C to ECC6. When I change the transport layer of a package that is newly imported and save it, the system prompts for a local work bench request.

  • Creating a control sequence of digital outputs with timing

    I'm trying to create a controls system for a cleaning process. I am controlling a pump, heater, and several solenoid valves using relays that I am opening and closing with the +5V from my USB 6008 and each relay goes to one of the digital I/O lines,

  • HOW CAN I GET A DIFFERENT STATE WHEN CREATE THE VM

    All i Always get is  Country United States  (US)  Region Washington (WA) City Redmond ZIP code 98052 What do i do to change the state ...Please help

  • How well does Aperture 2.0 run on the new 13" Macbook Pro?

    Hi, I'm seriously considering buying a new mac in the next week or so. I was just wondering if any of you had any advice as to whether the new 13" Macbook Pro is good enough to run Apple's Aperture 2.0, quite well? I'm not worried about the screen si