My iTouch 5th generation is not recognised by my computer. why?

I downloaded ios 7.0.4 for my itouch 5th,and suddently my iTouch shutdown automatically, then my ipod showing- connect to itunes. and i disconnected the cable and reconnect it, and my computer showing a notification - like this !                                                         
after i clicked this notification, it leads to driver properties and showing this message
Please help me to fix this problem !!

Don't know how to post, plz help me here its urgent!!

Similar Messages

  • Help - My 5th Generation Ipod not recognised by ITunes but 1st Gen Ipod is!

    Can anyone help? This is driving me mad!
    I recently purchased a 5th Generation 80gb Ipod. Before installing to my PC I downloaded the latest 7.2 version of ITunes together with quicktime. However whenever I plug my new Ipod in, nothing happens other than the 'Found New Hardware Wizard' appearing in XP asking for the driver to be installed and the Ipod Charging/displaying that it is fully charged.
    I have spent hours going through the apple site and following their suggestions on this and have done the following:
    Re-started the iPod service
    Uninstalled and re-installed ITunes 7.2 (at least 5 times now!)
    Deleted all my temporary folders and temp internet folders and cleared cookies, files, etc
    Ran Windows Install Cleanup Utility to clean up any leftover installer files
    Tried the Ipod in all of my USB 1 & 2 ports (My MESH PC is less than a year old)
    I then contacted Apple Support who suggested I try my Ipod on another computer and if it didn't work to return it to them. So I duly installed iTunes (7.2) on my laptop at work and hey presto my Ipod was recognised and I was able to download a few tunes.
    I glean from this that there can't be a fault with the Ipod itself??
    Back at home I re- tried all of the things above and then after still no joy I connected my old 1st generation ipod to my pc and after some time ( at least 5 minutes) iTunes recognised the old ipod and syncronised. Using the same USB Port and the same cable I plugged in the new Ipod but still nothing happened other than being asked to install the driver once again!
    Now all would be fine if I kept my music collection on my work laptop but unfortunately this is not possible and I could even get into serious trouble for having iTunes on there.
    If anyone has any suggestions I would be really grateful as £200+ is a lot of money to pay for something that does not work!

    The "driver" never was available from Apple. The driver files that Windows uses to communicate with an iPod are standard Windows OS drivers for a USB Mass Storage Device. If Windows cannot/does not recognize your iPod at all, not even at the driver level, it's likely an OS issue, unless the iPod fails to work on another computer as well. At that point you'd been dealing with a bad cable or bad iPod. Since another iPod works with the same cable, then it should be fine.
    Try everything in this article that you haven't already tried:
    http://docs.info.apple.com/article.html?artnum=61711

  • 5th generation ipod not detected by my windows xp.  works fine on other pc.  performed necessary steps to remove and reinstall itunes but having same issue. is there a driver i can download to pc then direct to that specific location when installing?

    5th generation ipod not detected by my windows xp.  works fine on other pc.  performed necessary steps to remove and reinstall itunes but having same issue. is there a driver i can download to pc then direct to that specific location when installing?

    I have a similar issue - my iPod nano connects and is visible in Device Manager yet invisible in My Computer and iTunes. I've tried everything I can possibly think of to try and solve this myself, all in vain.
    Mine is a nano 4G. I've been using it for quite some time without the slightest problem. I have been using WINAMP instead of iTunes to manage my darling nano.
    Then, one fine day I bought a new computer and the nano would not show up in My Computer, though the nano display shows "Do not disconnect". On my old computer it worked (and still works) absolutely fine with win XP as well as with win7 (the later I currently use on my new/problematic computer, which I bought last summer and that's how long I've had this problem).
    Of course, after several first attempts I gave up and installed iTunes. I've tried using the Apple support article "iPod not recognized in 'My Computer' and in iTunes for Windows":
    - reset
    - fully charged,
    - cable works fine on two other computers
    - in normal or disk mode makes no difference
    - tried to find anything useful in the diagnostics mode
    - reinstalled iTunes several different times since then to the latest version
    - I've unplugged every other USB device except for my mouse and keyboard and tried several different USB ports on my motherboard (USB 3.0 and conventional), as well as trying different USB- related options in my BIOS.
    - I've never used any Mac with this ipod
    - I've tried fiddling with the win7 Services by stopping and restarting them and of course
    - uninstalling the iPod drivers in Device Manager. After such an uninstall the ipod would automatically be recognised and "ready for use", i.e. being invisible in My Computer.
    - Attempted to find any possible third-party conflict with msconfig or the possibility that my ipod is being confused for a network drive (for which I've disconnected my HDD, leaving only my SSD with the OS).
    Sometimes, iTunes would note that iPod service (or something, can't remember exactly) failed to install properly and asked to try and repair it. I would click YES! and voila - no change! The ipod would rarely show up in iTunes on my problematic computer like this:
    iTunes would warn me that the nano would need restoring so I would try and do it on my haunted machine upon which iTunes would freeze like you seen in the picture.
    Despite this, I've updated and restored the nano on my father's computer to the latest version without any problems. This though, did not solve my problem in any way.
    I can load music to my nano through my old computer (which for me is a real pain and hassle) and the gadget works normally in terms of its disconnected functionality.
    I've taken my nano to the local service for repair and they said it was fine. Mercifully, they didn't charge for the diagnostics service (gee, thanks for not ripping me off!).
    Here are two screengrabs from my Device Manager
    and Devices and Printers screens on my comp:
    That is my sad story as far as I can remember. It's most likely something with the drivers or something along those lines though I'm out of ideas at this point.
    If you think you have any idea PLEASR HELP, I'M DESPERATE!

  • How can i stop itunes creating playlists on itouch 5th generation

    Hi All
    Happy new year to everyone.
    I have a new iTouch 5th generation which I am trying to set up and sync etc.  One of the problems I have found is this:-
    Despite selecting in iTunes to Manually control the sync process so that I can choose which playlists are synced to the device, iTunes somehow managed to also sync playlists it created from my music.  Along with my own created playlists, were playlists for 90's music, recently played, classical, etc etc.  None of these playlists were created or chosen by me.
    How can I stop itunes creating and syncing these unwanted playlists.
    the iTouch is a 5th generation with IOS 8.1.2, : PC is running windows 8, itunes verion 12.0.1
    Many thanks

    Hi  - I never thought of using the WiFi.  Thanks.  I already have the 'manually manage music' checked  but now I need to get rid of most of the music.
    Let me look at the settings on my iPad. Okay I checked not to automatically sync.
    Brian, I do need to transfer PDF Files from my iMac to my iPad.  I suppose that using Wifi I can just drag and drop?  Using iTunes like I have been I just open Adobe on my iPad then use iTunes to drop the class files into the iPad.
    Allen

  • The head phone jack on my brand new iPod touch 5th generation is not working properly

    The head phone jack on my brand new iPod touch 5th generation is not working properly. It has sound without the headphones in but when I plug them in it has no sound, it's low, or poppy. I had only used my apple supplied headphones once before and it worked fine. I know it's not the headphones because I tried them on my girlfriends phone and they worked fine.

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iOS device. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar

  • My iPod nano 5th generation is not recognized by iTunes. I did update, but still, it won't work. I don't want to uninstall the iTunes cos  I don't want to lose my music and audio books. What to do? It started after I updated iTunes.

    my iPod nano 5th generation is not recognized by iTunes. I did update, but still, it won't work. I don't want to uninstall the iTunes cos  I don't want to lose my music and audio books. What to do? It started after I updated iTunes.

    iPod appears in Windows but not in iTunes

  • My ipod 7th generation is not recognised by itunes and my computer. I am not able to transfer any songs. Please help me on this regard. I tried all the steps from apple website

    my ipod 7th generation is not recognised by itunes and my computer. I am not able to transfer any songs. Please help me on this regard. I tried all the steps from apple website

    This article should give you the options
    https://discussions.apple.com/docs/DOC-3991

  • Ipod 5th Gen not recognised on any computer - will charge via usb

    Hi,
    Does anyone have a fix for my ipod which is not recognised by any computer. Have tried the software reset, putting into disk mode, but no computer will see it as a device. The ipod will however charge by the usb.
    I have tried another 5th Gen on the same computer which is recognised everytime.
    Cannot use the system restore as the computer does not recognise it..
    I need helpppppp!!
    Thanks
    Jimmy

    You've pretty much exhausted everything so it is time to get it serviced. Is it in warranty?

  • My ipod touch 5th generation will not turn on and the home button doesn't work. what do i do?

    Hello my name is Leslie and i would like to ask you guys a question on how to fix my ipod or what is wrong with it. My ipod touch 5th generation will not turn on and the home button doesn't work. what can i do to fix it ?

    Has the home button worked in the past, or is this been something that hasn't worked for some time? The only way to reset the device is with the sleep/wake (power) and home buttons together. Without it, you would have to wait until the battery dies and then plug it in to try and reset it. The Home button is used for several user troubleshooting steps. Without it, you cannot perform a reset, put the device into recovery mode, or place it in DFU mode. You need to get the home button repaired.

  • My ipod touch 5th generation is not turning on and i cant restart it because the home button does not work and it will not connect to anything

    my ipod touch 5th generation is not turning on and i cant restart it because the home button does not work and it will not connect to anything

    Get it fixed then, make an appointment with the Apple genius bar.

  • Ipod 5th generation will not turn on, charge, or connect to macbook laptop. i was using it for music then all of a sudden the screen went black and was unresponsive. i have tried using other cords. also my home button is broken. someone please help!

    ipod 5th generation will not turn on, charge, or connect to macbook laptop. i was using it for music then all of a sudden the screen went black and was unresponsive. i have tried using other cords. also my home button is broken. someone please help!

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My ipod classic 5th generation is not playing any kind of audio. i tried resetting it and i used multiple speakers/ear buds. nothing worked. do you have any other suggestions?

    My ipod classic (5th generation) is not playing any audio. when i play a song the little picture of the album cover comes up and the seconds clock and the blue line come up and change/move, but there is no sound. i have tried multiple speakers/ear buds and i have tried to reset it but notheing worked.
    What should i do? 

    Assuming that you actually have the volume turned up (you don't say that you have, after all), make sure that the Volume Limit is not turned all the way down.
    Look in the Settings/Volume Limit menu. The small arrow controls the volume as well.

  • HT1351 hello my apod nano 5th generation is not showing my videos on itunes...what can i do to watch my videos on itunes?

    hello my apod nano 5th generation is not showing my videos on itunes...what can i do to watch my videos on itunes?

    Try changing the cord. I could NOT get my computer to recognize my iPod 5th Gen until I read somewhere that different apple devices use different cords. I was inadvertently using my iPad cord and that caused my computer to not recognize my ipod.

  • Does anyone know when they will be making iHomes with 8 pin docks (to work with the iPhone 5 and iTouch 5th Generation)?

    It has been almost six months now since the iPhone 5 and the iTouch 5th Generation were released and I am still unable to find new iHomes with the 8 pin docks.  I refuse to buy the adaptor because it will be too unstable on my current iHome but I also refuse to buy a more stable iHome with the old dock.  Does anyone know if/when they will be releasing iHomes explicitly for the iPhone 5 and the iTouch 5th generation?

    I doubt anyone here will have any information about what iHome's plans are. Try contacting them here:
    http://www.ihomeaudio.com/support/

  • My ipod touch 5th generation will not connect properly to charger.  I have tried on different cords but it will not show that it is charging.

    My ipod touch 5th generation will not charge when connected to charging cord.  I have tried two different cords with same result.  It will charge for a second then show not charging.   Any suggestions?

    - See:       
    iPod touch: Hardware troubleshooting
    - Try another cable
    - Try another charging source
    - Inspect the dock connector for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genus Bar of an Apple store.
    Apple Retail Store - Genius Bar

Maybe you are looking for

  • Distorted sound on M30-604

    Hi, I have got a problem with the sound on my Satellite M30-604. If for instant I play a cd or an mp3 (doesnt matter with what program), the sound is distorted. It sounds a bit like back in the old days when my taperecorder got jammed. After a while

  • Dispacher and server0 is not started during NW2004s installation

    Hi, Dispacher and server0 is not started during NW2004s installation. SAPInst is stopped on the step of the 'Start java instance'. SDM is 'running' but dispacher and server0 is 'Starting framwork'. So I configured the some parameters via configtool b

  • Can create 52 publication, but creating 53rd leads to problems

    Hello, My apologies in advance for a long post, but I was really trying to make sure I do my due diligence before turning to the community for help, so here it goes. I am working on a proof of concept with the purpose of using transactional replicati

  • Clicks and pops for no apparent reason

    Old Today, 05:17 PM #1 USCRash New User Join Date: Apr 2008 Posts: 12 Default Clicks and pops, audio dropouts I don't know if anyone else has this problem, but it's driving me crazy. I can't have any other program open while running soundtrack pro, e

  • Resetting to factory default?

    I have seriously messed up some settings in my server, I'd like to reset windows server to the factory default, I am using windows server 2008... I would just put the 2012 trial inside of it, but I cant get it to work, So I am going to stick with my