My itouch bright settings is not working

My itouch is dark and the bright settings is not working.

Have you tried the standard fixes:
- Rest:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup via iTunes on your computer
- Restore the iPod to factory defaults/new iPod

Similar Messages

Brightness control does not work with the bluetooth keyboard connected on my iPad2. Please someone could help me ?

Brightness control does not work with the bluetooth keyboard connected on my iPad2. Please someone could help me ?

Julien-
I have the Apple MC184LL/A Bluetooth Wireless Keyboard. The brigtness control works with mine, as do most of the other functions.
Try cycling the keyboard off and on. Hold the power button until the green LED goes out. Then press it one more time to turn it back on.
You might try resetting the iPad's network. Go to Settings-General-Reset-Reset Network Settings. Then you may need to reconnect your WiFi and Bluetooth.
If that doesn't help, try resetting/rebooting the iPad. Hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow. The iPad will restart in a couple of minutes. Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
Fred

My iPod 5 will not sync ANY music. All my music was on prior to syncing. The sync deleted all my music. I can now no longer add any music. I have the "sync music" checked. Restoring factory settings did not work. Any thoughts?

All my music was on prior to syncing. The sync deleted all my music. I can now no longer add any music. I have the "sync music" checked. Restoring factory settings did not work. Any thoughts?

When you synced with iTunes It would have tried to replace the music on the iPhone with what is on the computer. which is what happens when you sync with iTunes.
If the songs are purchased you can re-downloaded them Pretty easily. You mentioned that you still see the songs and that you could not play them. Do they have a Cloud symbol next to them? If so this means that you can download them but that they are not on the device.

Transaction SE16: Field selection (User-Specific Settings) is NOT working for ALL tables

Hi Guru’s,
I have an issue in Transaction SE16, Field selection (User-Specific Settings) is NOT working in Tables (ALL tables).
Following is the screenshot attached for your kind reference,
That is in the initial screen of transaction SE16 if I choose Filed Name or Filed Label only the technical details (Field Names) are appearing and not the descriptions like Client, Purchasing Doc, and Company Code Doc. Category Document Type etc…
Right now I am using ECC6 and EHP7 SAP system.
Please help me to resolve this issue by implementing any OSS note or User Role creations or any technical changes required in system.
Hope the requirement is clear and in case need any clarification please revert back.
NOTE: Right now in Development System we don’t have any successful user to compare the settings.
Regards,
Kumar.S

Thanks Patra.
Even I searched in SAP portal and couldn't able to find the relevant OSS note.
Following is my BASIS team response,
"Only you can view Table Field values from higher release"
Can you suggest / guide on this comment as well.
Looking forward to your speedy response.
Regards,
Kumar.S

My brightness buttons do not work

I just installed mountain lion, and now only my F1 and F2 brightness keys do not work...

Now when I press the volume increase button it just flips to a different screen..

Brightness function is not working

i have hp pavilion 14-n201tx notebook.i am using it from february.from yesterday its brightness function is not working.what should i do

Hi narendra1k,
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are having an issue with your brightness. I will be happy to help you with that. Let me start by getting your operating system. I would start with a Hard Reset to see if a clean restart gets you going again.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Cant seem to make photoshop default to open photos in Windows. Its defaulting to Adobe and I changed settings, still not working

When I upload photos from my phone to computer Cant seem to make photoshop default to open photos in Windows. Its defaulting to Adobe and I changed settings, still not working. Even when I press preview on photo and they open in windows photo viewer I cannot save the file to my computer. I have Photoshop CS4

infact both are same only..http://store.apple.com/us/product/MB572Z/B/mini-displayport-to-vga-adapter "http://store.apple.com/us/product/MB570Z/B/mini-displayport-to-dvi-adapter"

Since my update, when I try to view videos(rather I already owned or just rented from iTunes) the movie starts playing then I get a pop up can't download view. I've reset my settings, still not working.

Since my update, when I try to view videos(rather I already owned or just rented from iTunes) the movie starts playing then I get a pop up can't download view. I've reset my settings, still not working.

You said:
We still couldn't get it to stop timing out. I tried to download the firmware from iClarified but iTunes said it didn't recognise the software.
Just what did yo do to gt iTunes to see the download:

I do have HP Envy M6 1216 Tx notebook and its brightness keys are not working.

I do have HP Envy M6 1216 Tx notebook and its brightness keys are not working.
This question was solved.
View Solution.

Hi,
Try using Recovery Manager to reinstall your original AMD graphics driver - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the relevant document on the link below.
Recovery Manager - Windows 8.
Recovery Manager - Windows 7
After the reinstallation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Privacy settings STILL not working - sort it out s...

i always have my privacy settings fixed so that all options are set to "contacts" only. however i am STILL getting messages from random strangers saying that i appear interesting.
i'm not interesting. i have no interest in receiving these messages. i have updated my software and rechecked all the privacy settings but i still get these messages.
skype - can you PLEASE sort this out because it's getting so i don't even want to log in. it's SO ANNOYING!!!!!
i'm running on a mac (lion) - updating doesn't help. any other ideas? frankly at the moment i don't see why skype even bothers to have security settings - this is not the first time (by any means) that this has happened: they shouldn't make these kind of settings promises if they can't keep them.

jordankees wrote:
I am having the same issue. I've gotten over 200 abusive IMs and random people calling me. I have had Skype for years and I have never had an issue with my security. I only have a smallamount of select contacts and I have never allowed people that are not on my contact list to contact me. Please help me fix this. It is getting out of control and I now have more than200 people blocked. I tried the whole changing my online status thing and it appears to have worked, but I am still skeptical. I dont know how this happend and now I am worried that my information is out there somehow for the world to see.
If/when you have this issue, doing this http://community.skype.com/t5/Security-Privacy-Trust-and/privacy-settings-STILL-not-working-sort-it-... will fix the problem.
About Me You can also use a IP Camera as your camera for Skype video Example Instructions

I am using iPhone 4s with no sim card. My WiFi turned grey and isn't working. I've tried many methods like freezing and Resetting the network settings, still not working. Now what should I do? (iOS 7.1.2)

I am using iPhone 4s with no sim card. My WiFi turned grey and isn't working. I've tried many methods like freezing and Resetting the network settings, still not working. Now what should I do? (iOS 7.1.2)

Put in a micro SIM (SIM need not be active) and
Restore from backup
Restore as new
http://support.apple.com/en-us/HT201252

Volume & Brightness Controls do not work on Keyboard

I have a five and a half year old Mac (purchased January 2009) running OS X 10.5.8. My keyboard recently became faulty, so I went to the Apple store and bought the exact same thing as a replacement. The keys all appeared to work fine and I was very happy. However, today I tried to play a song from my iTunes library and noticed the volume up and down keys did not work! I then tried all of the keys across the top and discovered that the brightness keys that are identifiable do not work... that in fact the brightness up is the F15 key (when it should be the F2 key) and the brightness down is the F14 key (when it should be the F1 key).
I have read through the forums on these boards and tried all the suggested solutions. I have:
1) Tried checking and unchecking the "Use all F1, F2, etc. keys as standard function keys." Restarted the computer. No change. Keys still don't work.
2) Reset the PRAM. Did it three times. No change. Keys still don't work.
3) Rebooted in Safe Mode to delete system caches. Restarted from the Apple menu. No change. Keys still don't work.
4) Someone suggested going to the Apple downloads page, but they didn't follow that suggestion up with anything else. I see updates for keyboard software, however they are all for wireless keyboards. My keyboard is wired, and it has the number pad on the right.
5) Run the command "sudo killall coreaudiod" in Terminal. No change. Keys still don't work.
6) Deleted the com.apple.soundpref.plist file in the Preferences folder in the User Library folder. No change. Keys still don't work.
7) Checked the Audio Midi Setup in Applications to ensure that the settings for output are set to 2ch- 24 bit and 44100.0 Hz for format. Which they are.
I will say that something did work! I downloaded and successfully set the function keys for volume and brightness using Spark (thanks to user turtlenecknz!). I will use this method as I think it is the only thing that will fix my problem (for now, at least). I'm just curious if there is a way to avoid using a software program as I'm not sure if it will need to be re-opened on system restart... for me, it boils down to reliability.
After reading this thread - Re: Mac Aluminum keyboard VOLUME KEYS not remapping - I've determined that the original keyboard I had for this computer was the MB110LL/A model. The Apple store gave me the MB110LL/B model. That is why I'm having this issue. Does Apple even carry the A Model any more? I found the A Model on Amazon, but it's $81 + $6 shipping- yikes! Does anyone know another site that sells it for less?
Any other troubleshooting suggestions are greatly appreciated! And, if anyone knows whether Apple carries the A Model any more (or know someplace I can get one cheaper than $87!), that is appreciated as well! Thank you to anyone that read this rather lengthy message, and then takes the time to respond.

Hello,
Simplest would be to add Spark to your Login items to have it start each time, or in the Dock, right click & choose Open at Login.
eBay might be an option, the black ones are esentially the same as the white ones...
http://www.ebay.com/sch/sis.html?_kw=usb+keyboard+mac+keyboard+apple+keyboard+us b+apple+mac+macally+keyboard+apple
http://www.ebay.com/itm/Apple-Extended-Keyboard-Thin-Wired-USB-/271546078970?pt= PCA_Mice_Trackballs&hash=item3f396856fa

My Time Capsule has stopped working. Restoring default settings does not work.

I have a 2TB Time Capsule (Model No. A1409). I think that it is approximately 20 months old. It has been working very well until around two months ago, when it began to display the flashing amber light. At that time I performed a hard reset, restoring the default settings. This worked and the capsule continued backing up perfectly for a further three weeks. However, about three weeks back the flashing amber light returned. As I have been busy elsewhere I was not able to attend to this untl recently. It does not seem to matter how many times I reset the device, I cannot return it to a working state.
The capsule has previously been set up to connect to the internet through my existing broadband service. As such, it was initially set up and subsequently restored wirelessly. I no longer seem to be able to achieve this. Has anybody else experienced similar difficulties and if so, were you able to remedy it.
Grateful for any advice. I feel another trip to the Genius Bar coming on.

Yeah absolutely - no problem.
I had the same thing happen where I did a restore on my personal TimeCapsule (TC),
and when I updated the device after installing it, it for some reason set the TC into bridged mode shutting off DHCP/NAT service.
Which means, that it doesn't reserve an IP for any client trying to attach. This is what it sounds like yours is doing.
So if you see that it says bridged, and that box with dhcp reservation is greyed out, change it from bridged to DHCP/NAT.
This will allow any client (computer/device) to attach and reserve an IP address for access to the internet.
Once that is set, and you update, hopefully the light should go green.
I would also recommend checking the "internet" tab, and making sure that your IP address is assigned using DHCP. (It probably is - but that part is essential for communication with your Internet Service Provider (ISP)...
SO - if the device goes green after the update:
If it does, then go back into the router and click on the wireless tab and confirm your wireless settings are correct, if any changes are made, update.
At that point, you should be able unplug your laptop to wirelessly connect to the router.

In windows 8.1 64 bit , brightness and sleepmode not working

I have the 15-g009AX notebook via flipkart . After installation of windows 8.1 64 bit brightness and sleepmode and hybernate mode not working
Please send the solution.
From.,
Madhu

Hello @vmsbobj ,
Welcome to the HP Forums!
I understand after installing Windows 8.1 you are no longer able to use the brightness, hibernate or sleep mode options.
I cannot seem to find the exact model you've listed. The drivers found here should do the trick for you though: HP 15-g030au Notebook PC Drivers. What you're looking for is the HP System Event Utility software found in the Software - Solutions section.
If you can respond with the product number for the notebook I may be able to give a better answer. For information on finding your product and model numbers click here: How Do I Find My Model Number or Product Number?
Let me know if this utility resolves the issue.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

The icon "Settings" is not working in my ipad2

The Icon "Settings" of my ipad 2is not working. If you click it does not respond. It just started like that yesterday but today anoher problem that i can not slide to restart, and if i t works it just open with a very low speed. Someone tell me waht to do.

Try closing the Settings 'app' completely : from the home screen (i.e. not with the Settings app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Settings app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

My itouch bright settings is not working

Similar Messages

Maybe you are looking for