My itouch connectivity to my network/wifi isnt working...HELP:(!!
PLEASE HELP
Start here:
http://support.apple.com/kb/TS1398iOS: Troubleshooting Wi-Fi networks and connections
Does the iPod see the network?
Error messages?
Have you successfully connect to that network befor
Does the iPod connec to other networks?
Do other devices connect to your network?
Similar Messages
-
my iphone 4s can not scan any wifi network, i tried everything but still can not scan any wifi connection even though our wifi is working properly in our mac book and ipad. What do i need to do if the problem is the hardware?pls help
When you say it "can not scan any wifi network" do you mean it is not detecting Wi-Fi networks?
Is Wi-Fi turned on in Settings > General > Wi-Fi?
Have you tried Settings > General > Reset > Reset Network Settings?
Is it just the home network that the device will not connect to? or any network? -
Hi, i am not able to connect to the internet. wifi not working.
hi, i am not able to connect to the internet. wifi not working. not able to find proper drivers for 32 bit win.7 os. need urgent help..
This question was solved.
View Solution.Hi:
I can give you the link to the wifi driver, if you do the following steps to post the hardware ID for the wireless card, so I can figure out what model wireless card the notebook has...
To find the hardware ID, go to the device manager and click on the device labeled Network Controller.
Then click on the Details tab at the top of the Network Controller window.
Now you see a Property drop down list and it is defaulted to Device Description.
Drop down on that list and select the second item (Hardware ID's).
Post the top string of characters you see in the window. -
how can i disable my iphone and it says connect to itunes and it isnt working??!? and the iphone isnt in service??
How can you disable it?
Well anyways, sounds like it's in recovery mode. You'll need to perform a restore through iTunes on the computer. -
My volume isnt working help, my volume isnt working help
my volume isnt working help, my volume isnt working help
Hey jusmile_,
Here is an article for you that will help you troubleshoot this issue:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
No sound through stereo headset
Inspect the headset jack for debris and clean if necessary.
Connect the headset and make sure the connector is pushed in all the way.
Check the volume setting. Adjust the volume by pressing the volume up and down button on the left side of the iPhone.
If you are trying to listen to music and cannot hear any audio, make sure that the music on iPhone is not paused. Try squeezing the headset microphone to resume playback. Additionally, from the Home screen you can choose iPod > Now Playing, then tap Play.
Make sure the latest version of iTunes is installed on the computer that you are syncing the iPhone with (songs purchased from the iTunes Store using earlier versions of iTunes won't play).
Try another Apple headset (some third-party headsets require an adapter to be used with original iPhone).
Try a different song or video.
Check to see if the iPhone alert sounds or other iPhone sound effects exhibit the same audio issues.
Disconnect the headset from the iPhone and see if sound comes from the built-in speaker.
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden -
When updating itunes from 10.0.1.22 to anything higher, my network card stops working, HELP!
When updating itunes from 10.0.1.22 to anything higher, my network card stops working, HELP!
I have an iPhone 3gs, and a work iPhone 4 on iOS 4.3.3. I want to sych with iTunes but clearly must upgrade to >10.1
When I do, my network card no longer works on my desktop. Please HELP!
My spec is;
NETWORK CARD;polydorus wrote:
This isn't my thing, but the following post on this seems to have helped some people:
http://discussions.apple.com/thread.jspa?messageID=12622179#12622179
That's the go-to advice with this one, p. (I certainly don't have much to offer beyond it, but it does a superb job in the vast majority of instances.) -
I have had my ipad retina for two and a half weeks but since the week end every time i connect to the wifi network it joins then disapears as soon as i open safari for example or just disappears at intermittent intervals....i have my iphone 4s connected to the same wifi network with no such problems.
I have tried resetting the network settings to no avail
Does anyone have any suggestions?
Many thanks in advanced.I have had my ipad retina for two and a half weeks but since the week end every time i connect to the wifi network it joins then disapears as soon as i open safari for example or just disappears at intermittent intervals....i have my iphone 4s connected to the same wifi network with no such problems.
I have tried resetting the network settings to no avail
Does anyone have any suggestions?
Many thanks in advanced. -
My bb curve 8520 refuses to connect to my home wifi please somebody help me
i have had my bb curve 8520 for about 6 months now a not being the most hi-tech person in the world i have just downloaded bb app world altough i have managed to sucessfuly download a couple of free new apps to my bb
( battery booster and the sky sports live football scores app ) then i tried to down load TuneIn radio app as i like to listen to music when going to sleep and was fed up with using my top-up to keep paying for single tracks off the vodafone site at first the radio app just would not download that was at 4am this morning so this afternoon i thought i would give it another try and after a quite along wait it finally downloaded brillient thinks me but then when i went to use it i tried to connect to the USE WIFI ONLY option as i had just run out of credit but the wifi just will not let me connect to this app or website whatever it is i went to the connections on the home screen and selected wifi and connected it it said it was connected sucessfully so tried the app again but to no avail i have looked through a lot of posts on this forum and tried absolutly every thing that others have suggested some even say about not having a network service plan ( which i presume is your web monthly web allowance megabytes and that i hope anyway) but i know for a fact that i have one as i pay 5 pounds a month for 500mb and when i rang my account balance number this morning to use the vodafone I.O.U service it told me that my web allowance had been used so is there any one who can help me if this is the case about some websites and apps not being available unless you have or your service is paid upto date the why has it the wifi only option on the app and after it refuses me access to this app a screen pops up saying reload the screen but right at the top of the screen next to the app name there is a red warning triangle and next to it says" IO error :Tunnel...."
please is there any body out there that can help me with this its driving me mad thank you to anyone in advance if you can help with thisplease please someone help me out T_T
«..:itufa¤Pitufo::..» -
IPhone 4S "could not scan for wireless networks" WIFI NOT WORKING?
Ok, so I understand there is a million threads on this same issue... YOU'D think it would be fixed by now?
What I don't understand is why the wifi isn't working?
I just got the iPhone 4S yesterday, I already have an iPhone 4. The iPhone 4 is consistently using my home wifi while I am at home PERFECTLY. My iPhone 4 is updated to the latest software too iOS 5.1.
My iPhone 4S will not connect to wifi. I am entering the right WPA user & pass. It is updated with iOS 5.1.
My iPad, iMac, Macbookpro, & iPod ALL have NO TROUBLE connecting to my home wifi.
I do not understand how this is a wireless router issue when it works with all of my other Apple devices BUT the iPhone4S?
I have tried everything under the sun, restart reboot, turn off, turn on, switch network off, switch it on, reset this, reset that?
PLEASE HELP ME! I have never been this disappointed in Apple (as you can tell I own everything by Apple, so I am quite the fan..)
What the ****?Could this be the problem?
iPhone 4 Modem Firmware : 3.0.04
iPhone 4S Modem Firmware : 2.0.10
Wifi is working on my iPhone 4, NOT on 4S -
Why is my new 4S I got yesterday using a 2.0.10 firmware, isn't that old?! Isn't the newest 4.0+?
I am so tired of trying to figure this out.
The Wi-Fi addresses in the About settings are different on both phones too. -
My WiFi was working perfectly for Browser and now it isnt anymore all of a sudden? I readded my ADSL WiFi network and still doesn't work??!
What happens... what error do you get?
Details, please.
First thing...
Do a simple reboot on the BlackBerry in this manner:
With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescirbed for most gltiches and operating system errors, and you will lose no data on the device doing this.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Unable to connect to home network (WPA2-PSK, works on Windows)
Hello!
I am having problems with connecting to my home network (on a FRITZ!Box Fon WLAN 7360 SL) which uses WPA2-PSK encryption.
Windows works normally so I don't think that it is a router issue.
In addition, I managed to connect to my Universities WPA2 network and another unsecured network without problems.
I tried netcfg+wpa_supplicant, wpa_supplicant on its own and wicd (on a sidenote, wicd didn't even manage to connect to the router when using a cable). None worked.
This is the wpa_supplicant conf file that I am using:
## wpa_aachen.conf
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
ap_scan=1
fast_reauth=1
network={
ssid="myssid"
psk=hexcode
proto=WPA RSN
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
I am getting an "authentication timeout" error everytime I try. Yes, I double and triple checked the passphrase. I also tried it via hexcode and plaintext passphrase.
Does anybody have any suggestions?
Last edited by lorizean (2012-10-14 20:59:49)Ive been trying the same thing for several hours googling it etc. wicd doesnt work always ends up with bad password error no matter what..
so.. this worked for me:
get into term as root and type:
NetworkManager start
then it will pop up in the notification area click network settings / wireless /connect to hidden network and type name, pass and it connect just fine..
really simple and it works -
Can't see my own Airport - can connect to other networks. Basestation works
Until recently my Airport Express worked fine (and had done so for a year or so). But a couple of months ago I started having problems connecting to it, and finally a month ago my Powerbook couldn't see the basestation at all. I could still see the other networks in my area, and connect to these (including some airport express networks), so I reasoned that my Airport Express was dead and had it exchanged for a new one...
BUT when I brought my new basestation home i STILL couldn't see it from my powerbook (even if I placed it 3 ft away). To double check I tried it at a friends house (with his PC), and he could see the basestation just fine...
So my question is this:
If I can see (and connect to) other networks than my own airport base, and another computer can connect to my airport, and my ADSL works fine with a cable - where is the problem? I really have no idea where to start looking...
please help me, this is frustrating...!
thanks, LarsBack again, more frustrated than ever...
I had my friend come over, and with his PC and my Powerbook 10 inches apart, both situated less than 10 feet from the basestation, we can see exactly the same wireless networks - EXCEPT my very own basestation, which only my freind can see (on my friend's computer it's named "Apple Network edc585")!!!!
This leads me to think that somewhere in some program on my computer there's something blocking my access to my Airport... The only thing I did recently which has to do with the internet is that I installed an Apacheserver, but this didn't have immediate effect on my airport - so I can't think why it should have now...
Where can I go? Is there something I can uninstall and reinstall? Should I trash the Airport-assistant and reinstall from my airport-cd?
Help pls... -
After I updated osx 10.9.5 I can't connect to internet through wifi. So, what the problem please help me to solve this problem urgent!!!
I've been having horrible wifi connectivity problems with my mid-2012 MacBook Air for the last several weeks. I just realized today that the problems started around the time that I upgraded to 10.9.5 on September 17th.
It's reached the point where I keep Airport Utility up in a corner of my screen so I can see whether I have internet or not before hitting Send or Post.
After reading Linc Davis' post from September 27th, above, I ran the Wireless Diagnostics when I lost internet. Internet access came back while the diagnostics were running. I pressed Continue and lost connection while the second was running. Based on Airport Utility, I do not have connectivity more than I do.
Note that Airport Utility usually shows that it can see the router, but there is no Internet access. Other times it shows that it can not see the router.
Wireless Diagnostics suggested that I restart the router (a new Airport Extreme that I installed in August.) Restarted the router did not solve anything.
All other devices, wired and wireless, are working fine. The affected device is the only one running 10.9.5 wirelessly.
Any help would be greatly appreciated. -
IPhone 4s Getting Hot for no reason and wifi not working help?
The otherday my phone was in my pocket and I could feel it getting hot, so I pulled it out of my pocket and noticed it was a lot hotter than it should be, after noticing this I noticed that my wifi was not connected so I checked SETTINGS<WIFI and there was no connections, the little icon just kept spinning and spinning, so then I toggeled it off and on, no luck, turn airplane mode on and off still no luck, I even toggled of my mobile data no luck.
I preformed a reboot, (held both lock and home button together) and checked again, NOTHING.
I then turnt it off for 10 mins ( held lock button slid red icon across) and the phone got colder and then the wifi started working again.
then last night it did it again, I have taken the phone out of its case and changed the charger(just incase these were affected it), I then tried everything again, it helped but not for long, tonight it has done the same thing so I thought nothing of it, il just do what I had previously done,
BUT NO! not even resetting network settings helped, neither did erasing all data, neither did placing the phone into restore mode, restoring via itunes and then setting the phone up as new, just incase the backups contained software glitches causing the wifi not to work.
I have been screen shotting the phone in and out of charge showing no wifi connections are showing for proof for when I take it to the apple store thursday (everyother day was fully booked).
Being that my phone still is covered by apple care, Ive got proof that it is defective/tempermental(incase it starts working again and then stops) and obviously they can have a look at it, take it apart or whatever i dont care I want it fixed! but will they replace it?(the whole phone) and also will it be for free as ive still got apple care warrenty and it is hardware problems?
ALSO i never had any problems with 5.1.1 so I hope if i get a replacment it will be 5.1.1 as I wont update until 6.0.1 is stable enough*also, i have just reset all settings again and my wifi connections have appeared! this is taking the P*** now apple sort it out!
-
LaserJet Pro 400 MFP not working on the network port that works HELP !!!
I have a new LaserJet Pro 400 MFP (M425dn) USB works fine. When I remove the USB and plug it into the network Port no network can be found - It doesn't pick up any activity. So I test the network with my laptop ( connectivity is confirmed ). The network port is working properly- I plug in the LaserJet Pro 400 MFP (M425dn) and restart it - no network activity. I tried several ports in the front office and the printer can't connect to the network. BUT HERES THE FUNNY THING . If I take the printer to the back room where the router/switch is and plug it directly into the switch
( the same port as the front port ) it works !!!!! so why doesn't the printer work at the front office network port, where all the other devices work just fine using the same port ? But it will work, at the router/switch using the same port lol this is drving me crazy
any help ? ? ?I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP
Maybe you are looking for
-
Itunes makes my screen go BLACK and restart- will not work at all!
hello fellow apple distressers, hoping someone can help me as i would really appericiate it:):)! everytime i try and open itunes my computer freezes then the screen goes black. after the screen goes black the computer restarts all on its own! when i
-
I updated the latest version of itunes onto my pc (windows xp) and all of a sudden I can't open it up. Everytime I try to open it I get a window that says: "Data Execution Prevention - Microsoft Windows...To help protect your computer, Windows has c
-
Can't update or download apps anymore after updating to ios8
i don't know what to do, since updating to iOS 8 I can't update or download apps ,does anyone here know a solution to this? Please help thanks
-
How do I restore iWork after a crash?
I used to have access to Pages, Keynote and Numbers. After my system crashed I don't see them. How do I restore them to my unit if they weren't on the Time Machine (had to cut out some software to make room for data files)? Should I have a disk or c
-
Problem since lollipop, headset and "smart" flip cover
Hi, Have some problem since upgrading to lollipop. First it was the headset that didnt wanna connect, but solved it with a factory reset on both the headset and telephone. But i still has a problem with the flip cover, guessing that with the update t