My itouch isnt connecting to wifi even though my wifi has 3 bars

i've been having trouble with my itouch lately. its been unable to connect to wifi even though i have a strong signal of 3 bars and have been using the wifi for about a year now. but just recently anytime i try to join my wifi it says "unable to join "linksys"
please help

Here's the basic WiFi repair steps:
1. Reboot your router (unplug the power cord)
2. Reset the touch network settings - tap Settings > General > Reset > Reset Network Settings
3. When your touch restarts, tap Settings > WiFi > Other. Re-enter your network name, security, and network password.
If you still have problems and appear to be logged in, tap Settings > WiFi > and then the blue ">" next to your network name. You should have a device IP, Subnet mask, router IP, and DNS IP. If you device IP starts with 169.x.x.x then you have a bit more work to do. Write back.

Similar Messages

  • My ipad2 does connects to 3G even though ther is available wifi. How can I make it prioritize wifi?, My ipad2 does connects to 3G even though ther is available wifi. How can I make it prioritize wifi?

    My ipad2 connects to 3G even though there is available wifi. it finds the network but loses it in seconds and turns again to 3G. I've tried resetting network settings, rebooting iPad etc with no luck
    Thanks

    If you are not using data and the iPhone goes to sleep, it will automatically drop the wi-fi, and will not reconnect until you wake the phone up. That is the way it is designed. The only way around that is to turn off cellular data while at home and on wi-fi.
    Cannot answer the xbox question since this is an iPhone forum and I would have no idea.

  • HT1365 My ipad has trouble staying connected to wireless even though have strong wi fi signal strength.  Suggestions on solving the issue?

    My iPad had trouble staying connected to wireless even though have strong wi fi signal strength.  Could this be an iPad issue or something to do with updates or an adaptor?  Appreciate any feedback.
    bearjr

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My phone will no connection to iTunes even though I put in my password I need help

    My phone will no connection to iTunes even though I put in my password I need help

    Based on the numerous posts regarding iTunes and the App Store, there appears to be an issue at Apple's end. Although Apple has not provided any indication on the cloud status page.
    Do not change your settings.

  • When I try and distribute form, it says it cannot connect to server, even though I'm online, sign in etc.

    When I try and distribute form, it says it cannot connect to server, even though I'm online, sign in etc. How can I get it to connect?? I need to know, urgently to get a proposal in before the deadline.

    Try downloading the Find My Friends app and signing in with your iCloud ID to accept the terms and conditions there.  If that doesn't work, go to Settings>iCloud, tap Delete Account, then sign back in.

  • Have disabled IE on windows pc and am using Firefox as browser. iTunes now says cannot connect to internet even though Firefox working: suggestions

    Have disabled IE on windows pc and am using Firefox as browser. iTunes now says cannot connect to internet even though Firefox working: suggestions?

    There is a plugin for Firefox - see here
    http://latestversionplugin.com/current-version-plugin-itunes-application-detecto r.html
    It should be installed automatically if you install iTunes, but I guess when you installed iTunes you didn't have Firefox.  Just reinstall iTunes and it should work OK  (your iTunes library will not be affected)

  • My Images won't open in Photoshop CS5 when I click on Edit in Lightroom - even though this option has been selected?  To edit in Photoshop I have to export image from Lightroom then import into Photoshop.  I have other programmes such as NIK and if I wish

    My Images won't open in Photoshop CS5 when I click on Edit in Lightroom - even though this option has been selected?  To edit in Photoshop I have to export image from Lightroom then import into Photoshop.  I have other programmes such as NIK and if I wish to edit in these everything works fine.

    Same here. I've never had trouble with this function before.
    It opens the Photoshop application with all the menus/windows, but it never opens the actual image I chose to work on.
    I'm on a Mac, using OS X Yosemite, 10.10.1  Lightroom is version 5.7  Photoshop is CS5, version 12.0.4
    FWIW, I also can't automate>Photomerge ... . Makes me think Photoshop, not Lightroom, is all wacky. I tried dumping PS preferences

  • Tried to download Mountain Lion 10.8 upgrade but it failed even though my card has been charged

    I tried to download Mountain Lion upgrade from Lion but it failed even though my card has been charged

    http://www.apple.com/support/mac/app-store/contact.html?form=account

  • Itunes is saying that 11.0.5 is the most current version on my mac book pro even though 11.1 has been released.  what gives?

    itunes is saying that 11.0.5 is the most current version on my mac book pro even though 11.1 has been released.  what gives?

    Hey Blake Placid,
    Thanks for the question. If you have not already done so, I would download and install iTunes directly from the following link:
    Apple - iTunes - Download iTunes Now
    http://www.apple.com/itunes/download/
    Thanks,
    Matt M.

  • Already connected to wifi, has secure connection but cannot connect to app store errrormessage is a secure connection could not be established. please check your date

    already connected to wifi, has secure connection but cannot connect to app store errrormessage is a secure connection could not be established. please check your date & time settings. please help

    Can't connect to the iTunes Store
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors | iPad Insight

  • Cached results returned from LOV even though query criteria has changed

    Hi,
    JDeveloper 10.1.3.4
    JHeadstart 10.1.3.3.81
    We have a screen that is entered in create row mode. Just prior to entering the screen the user has to select a study for which the record is to be created for. On the screen we have an LOV and a few read-only fields that are populated from the LOV selection. The LOV includes a "study id" as one of its query bind parameters. The data returned by the LOV is very study specific in that a code used in one study will be the same as another however have a very different meaning. We are finding that the first time a code is used, the LOV dialog is shown, however it doesn't get shown again (just automatically populated) for any other further records created even though the user has changed study. It appears as though the code entered by the user is checked against the cache for a match and ignores the fact that the query bind parameter value has changed and should therefore either re-display the LOV dialog or retrieve the results from the correct study.
    The requery condition on the LOV seems irrelevant here (as I changed it to Always and nothing different happened). And of course there isn't a requery condition on the main view object as it is in create row mode.
    Can you point me in the direction of how to clear this cache when a new study is selected? I am unsure how to get at this cache.
    Thanks.

    Barry,
    Hard to help you as it is very specific to your app.
    Can you run in de bug mode and set a breakpoint in LovItemBean.validateWithLOV?
    This should help you find out why the LOV is not shown the second time.
    Steven Davelaar,
    JHeadstart team.

  • How do I stop "unable to download item" pop up appearing even though the item has downloaded

    how do I stop "unable to download item " pop up appearing even though the item has downloaded

    I'm getting the same response since upgrading to iso8 and downloading that bloomin' U2 album!
    I removed the album using the Apple tool, removed the booklet via itunes on my PC, still get that frocken pop-up!!!
    I have updated to ios8.2 patch, STILL GET THE POPUP SINCE DOWNLOADING U2's HORRIBLE ALBUM!!
    CAN OBI-WAN PLEASE HELP????

  • Exchange 2013 not receiving emails above 10MB even though MessageReceive Size has been configured

    Exchange 2013 not receiving emails above 10MB even though MessageReceive Size has been configured.
    [PS] C:\Windows\system32>Get-TransportConfig
    AddressBookPolicyRoutingEnabled                             : False
    AnonymousSenderToRecipientRatePerHour                : 1800
    ClearCategories                                            
    : True
    ConvertDisclaimerWrapperToEml                               : False
    DSNConversionMode                                          
    : UseExchangeDSNs
    ExternalDelayDsnEnabled                                     : True
    ExternalDsnDefaultLanguage                                  :
    ExternalDsnLanguageDetectionEnabled                         : True
    ExternalDsnMaxMessageAttachSize                             : 10 MB (10,485,760 bytes)
    ExternalDsnReportingAuthority                               :
    ExternalDsnSendHtml                                        
    : True
    ExternalPostmasterAddress                                   : [email protected]
    GenerateCopyOfDSNFor                                        :
    HygieneSuite                                               
    : Standard
    InternalDelayDsnEnabled                                     : True
    InternalDsnDefaultLanguage                                  :
    InternalDsnLanguageDetectionEnabled                         : True
    InternalDsnMaxMessageAttachSize                             : 10 MB (10,485,760 bytes)
    InternalDsnReportingAuthority                               :
    InternalDsnSendHtml                                        
    : True
    InternalSMTPServers                                        
    : {127.0.0.1}
    JournalingReportNdrTo                                       : <>
    LegacyJournalingMigrationEnabled                            : False
    LegacyArchiveJournalingEnabled                              : False
    LegacyArchiveLiveJournalingEnabled                          : False
    RedirectUnprovisionedUserMessagesForLegacyArchiveJournaling : False
    RedirectDLMessagesForLegacyArchiveJournaling                : False
    MaxDumpsterSizePerDatabase                                  : 18 MB (18,874,368 bytes)
    MaxDumpsterTime                                            
    : 7.00:00:00
    MaxReceiveSize                                             
    : 50 MB (52,428,800 bytes)
    MaxRecipientEnvelopeLimit                                   : 5000
    MaxRetriesForLocalSiteShadow                                : 2
    MaxRetriesForRemoteSiteShadow                               : 4
    MaxSendSize                                                
    : 20 MB (20,971,520 bytes)
    MigrationEnabled                                           
    : False
    OpenDomainRoutingEnabled                                    : False
    RejectMessageOnShadowFailure                                : False
    Rfc2231EncodingEnabled                                      : False
    SafetyNetHoldTime                                          
    : 2.00:00:00
    ShadowHeartbeatFrequency                                    : 00:02:00
    ShadowMessageAutoDiscardInterval                            : 2.00:00:00
    ShadowMessagePreferenceSetting                              : PreferRemote
    ShadowRedundancyEnabled                                     : True
    ShadowResubmitTimeSpan                                      : 03:00:00
    SupervisionTags                                            
    : {Reject, Allow}
    TLSReceiveDomainSecureList                                  : {}
    TLSSendDomainSecureList                                     : {}
    VerifySecureSubmitEnabled                                   : False
    VoicemailJournalingEnabled                                  : True
    HeaderPromotionModeSetting                                  : NoCreate
    Xexch50Enabled                                             
    : True

    hi stephan... lets put in this way... are you sending attachment ...did you checked the max attachment size as mail send size and attachment size are two different things.. please check this for info on different size creteria
    http://technet.microsoft.com/en-us/library/bb124345%28v=exchg.150%29.aspx
    can you please share the output of below three commands... i doubt your receive connector is not configured properly.
    Get-TransportConfig | Format-List -Property MaxReceiveSize, MaxSendSize
    Get-SendConnector | Format-List -Property Identity, MaxMessageSize
    Get-ReceiveConnector | Format-List -Property Identity, MaxMessageSize
    you can also check this link which gives a perfect info on how exchange works for email size... http://rajisubramanian.wordpress.com/2014/01/26/exchange-server-2013-message-size-configuration-detail/
    Mark as useful or answered if my replies helped you solving your query.
    Thanks, Happiness Always
    Jatin
    Skype: jatider2jatin, Email: [email protected]

  • HT1725 My purchases are only playing halfway through the song then they jump to the next song even though the download has been completed "successfully". Does this mean an incomplete download? How do I rectify this? Please help

    My purchases are only playing halfway through the songs then they jump to the next song even though the download has been completed "successfully" Does this mean I have to repurchase and download again?

    Delete and redownload.
    You do not pay for redownloads.  Follow the direction:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Has anybody experienced that the water indicator has been damaged even though the phone has been in contact with any fluids?

    My 6months old Iphone 4S started to turn itself of or freeze before shutting down about a month ago.
    I've been told it's the top water indicator that is broken and that the phone has been in touch with fluids-which it really hasn't!!
    Has anybody else experienced that the water indicator has been damaged even though the phone has not been in contact with fluids?

    Hi,
    I'm going to contact you via private message to get more contact info and case number.
    regards,
    steve

Maybe you are looking for

  • How do I duplicate custom print layouts across multiple pages?

    Hi there, brand new to LR. Using a Macbook Air. I understand that in order to print 3 4x6 images on one 8.5 x 11 sheet of paper I need to create a Custom Package Layout and then manually drag and drop each photo into a cell. That's fine, I've created

  • Slows down, hangs then fails to restart - Hardware or software ?

    Hello everyone. This has happened a couple of times in the last week. I'll be working away and applications suddenly start hanging for long periods of time. It might take up to 5 minutes to get a menu to pop down for example. All applications start m

  • Error of PO - "Purchase Order Does not exists"

    Dear Experts, Here i am facing one error of Purchase Order Creation and its further processing. I have created purchase order and saved it, system issued message that, Purchase Order XYZ is created. (I have taken trial for 2-3 Purchase orders). When,

  • My iMessage won't work on my iPod touch 4g

    It use to work and then one day it stopped it says after in with my apple ID it said you could not sign in please check your network connection and try again later

  • Print JTable with multi line header

    I need to print a JTable with multi line header, I want to know if I can use the method jTable.print(int, MessajeFormat, MessageFormat) by manipulation of the MessageFormat. How I can manipulate it? Otherwise, How I can print this?