My Itouch went white screen but when i reset it, it didnt change

It is still on the white screen even though i reset it.
And i cant erase everything because all the songs and stuff are from various computers. I think it is from pressure on it because it happened before, but not to this extreme, and i pressed on one side of it and it just fixed itself, but now it won't do anything. And when i did the usual unlocking procedure, the sliding across bottom of screen, and pressed where music would be and just randomly tapped it started to play music so i think there might be a wire or something disconnected but I'm not an expert so i wont jump to conclusions. But i really need help with this.

Can anyone help me? I have the same issue of the white screen.
My screen has gone completely white for no reason, i reset it pressing the home button and on power button at the same time, it worked great! for about 2 f**ing hours and then went completely white for good! im out of the warranty now so cant take it back. i have restored and deleted ALL of my software and started from fresh and guess what.... No change,
I am fed up with this s**t now, i am not the only person this has happened to, i know of friends who have the same problem over time and can do nothing.
I am in search of someone who knows what they are talking about and is not just going to tell me to press a bunch of buttons because that doesnt work!!
What is the point of spending so much money on a product that WILL inevitably F*k up. I am so dissapointed with this service and with apple because there is no contact or way of getting answers from any certified apple technicians.
So in a nutshell...
My screen has turned white for no reason.
I have reset it using home and power button.
I have done a system restore deleting everything.
I have not cracked the screen.
I have not applied pressure to it.
It has not been in contact with any fluids of any nature.
I have not dropped it, and it has always been in a case.
All i have done is use it.
HOW CAN YOU SELL A PRODUCT THAT WILL BREAK AND YOU CAN DO NOTHING ABOUT IT!
THIS IS APPAULING BECAUSE I HAVE SAVED VITAL INFORMATION AND SPENT ALOT OF MONEY ON YOUR APPLICATIONS AND SONGS EXPECTING RELIABILITY AND QUALITY ALL ROUND!

Similar Messages

  • I'm shooting great white screen but when I key out the white background, I have a very thin white outline around my person that I don't know how to soften without loosing some facial opacity. Any suggestions?

    Hi,
    I'm shooting white screen and FINALLY have my lighting, white balance, exposure and focus making a great looking, crispy clip! But when I key out the white background in a short segment, I'm left with a very thin, white outline around my person that I don't know how to soften, without loosing facial opacity. I only tried using the 'Edges' tool. Any suggestions?
    Thanks!

    set the wake-on lan on the main computer
    The laptop's too far away from the router to be connected by ethernet. It's all wifi.
    No separate server app on the laptop, it's all samba
    The files are on a windows laptop and a hard drive hooked up to the windows laptop. The windows share server is pants, so I'd need some sort of third party server running. Maybe you weren't suggesting to use Samba to connect to the windows share though?
    I'm glad that you've all understood my ramblings and taken and interest, thanks The way I see it, I can't be the only netbook user these days looking for this kind of convenience, and I certainly won't be once chrome and moblin hit the market.
    Last edited by saft (2010-03-18 20:38:08)

  • HT4097 I'm having problems updating my apps, when I press updates, it's just a white screen, but when I push the featured or genius buttons, apps appear, what can I do?

    I'm having problems updating my apps, the screen just stays white....

    Read this on iLounge posted by ahMEmon
    Go into Settings > General > International > Language and choose British English, then hit the Done button. The screen will go black with a comment about Language Settings. Be Patient, especially if you have a lot of apps. Let it run it's course and Then open the App Store again. Voila! Upgrade list is back. And it stuck when i changed back to plain English. He doesn't know why. I don't either. But I am now a happy camper. Worked on my 3rd gen iPad and iPad Mini.
    Hope it works for you!

  • Hello I just found a problem with my Ipod nano 6th generation. It worked fine an hour ago but then the screen turned a dark grey. Did the restore through Itunes and then it went white. But now it's totally unresponsive and seems to be off even when it is

    Hello I just found a problem with my Ipod nano 6th generation. It worked fine an hour ago but then the screen turned a dark grey. Did the restore through Itunes and then it went white. But now it's totally unresponsive and seems to be off even when it is plugged into itunes. Can't even restore it. I get Error 1415?

    Hi clarity,
    Welcome to Apple Support Communities.
    You may want to first try removing and reinstalling the latest version of iTunes by following the steps in this article:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    If you continue to receive the error message when connecting your iPod, see this article for more troubleshooting tips:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/TS1814
    Best,
    Jeremy

  • Ive just updated my ipod touch 4th gen, but the bat went flat now its just a white screen and when i plug it into my laptop nothing happenes

    ive just updated my ipod touch 4th gen, but the bat went flat now its just a white screen and when i plug it into my laptop nothing happenes

    Hello,
    This will fix your problem!
    To put the device in DFU mode,
    1. Connect the device to iTunes
    2. Hold both the power button and the home button down simultaneously
    3. After 10 seconds, release the power button but leave the home button pressed
    4. iTunes should then recognize that the device has entered DFU mode and ask to restore.
    That should get you back on your way.
    ~Lt. Leviathan

  • I can no longer see my pictures.....the screen is white boxes but when I click on the box an exclamation point pops up. Please Help!!!!

    I can no longer see my pictures.....the screen is white boxes but when I click on the box an exclamation point pops up. Please Help!!!!

    The exclamation point occurs when iPhoto breaks/loses the file path to the original file.  So try the following: make a temporary, duplicate copy of the library and apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot AND
    the option to rebuild the small thumbnails. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • Hello,I have done this successful in the past but on my IPad it shows I have 4 apps that need to be updated so when I hit the update tab all I get is a white screen. When I hit the purchase or other tabs it opens up. What could be the problem?

    ****,I have done this successful in the past but on my IPad it shows I have 4 apps that need to be updated so when I hit the update tab all I get is a white screen. When I hit the purchase or other tabs it opens up. What could be the problem?

    There have been numerous reports on the forum today regarding this issue. It seems to be an issue at Apple, but no information has been posted on the status site.
    http://www.apple.com/support/systemstatus/

  • .AVI file has white screen but does have sound...

    I have an .AVI file someone sent me which by using QT Pro shows just a white screen but does have audio.
    I have Perian installed and it didn't help with the white screen. I have opened it fine in VLC player, and a couple of other media players but my issue is that I want to import the AVI file into iMovie so I can make it into a DVD. However, if I import it into iMovie, it will be the same white screen with audio.
    I have searched the web far and wide to find a solution and most are saying it could be only viewable in QT on a PC of all things.
    Is there any components out there which will help me with this problem? Any other suggestions?
    Any help would be greatly appreciated.
    Regards,
    RB

    But when I selected the problematic AVI file it too appeared with a white screen w/sound in MPEG Streamclip. So I realized it wouldn't help me either.
    A white screen usually means the selected video codec is not compatible with the actual file. Normally, I would run a conflict test. Based on your previous posts regarding the compression formats in use and the video codec attempting to perform video playback, my first guess would be that the Perian component is trying to decode a DivX (possibly v5) file. I would probably either temporarily remove the Perian component and see if the AVI file plays or remove and then replace the DivX component (if the latest one is already installed) and see if this changes the component access order so DivX is called for video playback. If you have an older DivX component installed, there may be a conflict issue. (Remember to close QT while removing/replacing components so the list will be re-initialized before making a playback test.) If all else fails, try posting a sample file so we can see if the problem can be duplicated on other systems/configurations.

  • Start up Disk full and MacBook Pro won't reboot.  Only white screen but can sleep, restart, shut down.

    Start up Disk full and MacBook Pro won't reboot.  Only white screen but can sleep, restart, shut down.

    Reboot into Safe Mode (hold the shift key down at the sound of the chime, release when the progress bar appears) Safe Mode will take longer to boot than normal.

  • Curve 8900 went white screen suddenly

    My Curve 8900 went white screen suddenly. Phone still works, but nothing visible on screen. I did a wipe and reload of application software to the latest version using Desktop Mgr to no avail. Any suggestions to resolve? Thanks

    My Curve 8900 went white screen suddenly. Phone still works, but nothing visible on screen. I did a wipe and reload of application software to the latest version using Desktop Mgr to no avail. Any suggestions to resolve? Thanks
    Here is more infomation on my situation:
    - I did a battery pull, did not resolve
    - then conneted the device to my PC using Desktop Mgr and did a backup
    - then did a wipe and reload to latest version 5.x
    - more info:
      - carrier is T-Mobile
      - symptom is white screen, nothing is visible on the screen, periodically the red led light blinks

  • White screen, but you could get the display via an external monitor.

    Hi,
    A few weeks ago, my Macbook pro(A1212) stopped displaying. It only showed a white screen, but you could get the display via an external monitor. A friend looked at it and we discovered a burnt Mosfet (SI3443DV) which was item Q9400 on the motherboard. He went and changed it but it only displayed for less than 5 minutes and it went back to the white screen. would you please advice on what to do since i am not in a financial position to take it for repairs at the apple store?
    Joe

    Forget it.
    1: If it was tampered with, then it doesn't qualify for warranty or AppleCare.
    2: Repairing it will incur a new expensive logicboard, because that's how they do things. Swap parts out.
    3: No money, means no Mac.
    Sorry. We don't do hardware repairs here.

  • Ipod shows a white screen but  it still connects to my computer

    Today I was silly enough to drop my Ipod accidentally on the ground (by accident of course) though not very hard, when I turned it back on a white screen shows up. However I can still reset it but it still shows up as a white screen. When I plug the Ipod into my computer Itunes still picks it up and all of my songs & albums show up still. When I take the Ipod out it's still a white screen. I've tried resetting the thing many times but still no luck. What should I Do? Does anyone still think there may be hope restoring this?
    Message was edited by: Mama Luigi

    Try the white-screen topic of:
    'iPod touch: Hardware troubleshooting
    Frequently it is due to a hardware problem.

  • I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

    I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

    Hi there Fgonzalez2015,
    You may find the camera troubleshooting steps in the article below helpful.
    Get help with the camera on your iPhone, iPad, or iPod touch
    You see a closed lens or black screen
    If you see a closed lens or black screen when you open the Camera app, try these steps:
    Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
    Force the app to close, then open the Camera app again.
    Restart your device, then open the Camera app again.
    If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
    -Griff W.  

  • My iPhone 4S has a blank black screen but when someone calls me I can answer it, I just can't see anything

    My iPhone 4S has a blank black screen but when someone calls me I can answer it, I just can't see anything

    Try a reset: hold down the home button along with the sleep/wake button until you see the apple, then let go. (No data loss)

  • My ipod 4g was working fine until i locked the screen but when i tried to turn it back on the screen stays black and its been 3 days. Does anyone know how i could fix this?

    my ipod 4g was working fine until i locked the screen but when i tried to turn it back on the screen stays black and its been 3 days. Does anyone know how i could fix this?

    - Charge the iPod for half an hour.  Then reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - if still not working, connect to your computer. If iTunes sees the iPod, restore the iPod.
    - If still problem, place the iPod in recovery mode and then try to restore the iPod.  For recovery mod see:
    iPhone and iPod touch: Unable to update or restore

Maybe you are looking for

  • Unable to update iPhoto in Mac AppStore

    Hi guys, I'm stuck with updating iPhoto 9.1.5 to 9.2.1. I called with Apple because of this matter but they couldn't help me out. I bought my iMac last year and from the beginning it's saying there is an update for iPhoto. But when I try to update wi

  • Freight costs in SRM

    Hi, We are implementing Extended Classic Scenario. We would like to capture the Base price and Freight cost separately. In SAP ECC system we would like to capture the freight cost separately. If I look at the help documentatation, it is mentioned tha

  • How to fit multiple guassian peaks ?

    Hi, I have a  two column data set (x,y) that contain large number of Gaussian peaks ( several hundredes infact). You can think of it more like a wavelength spectrum. The number of spectral peaks is not known exactly. There is no problem in detecting

  • Reader XI: There was an error processing a page. A file I/O error has occurred.

    I have a user who has been experiencing this error sporadically when trying to open PDFs. Since the problem is not occurring for EVERY PDF, it becomes more difficult to figure out the cause. I had the user email me the PDF as an attachment, and I had

  • SAPScript: Formating an Address/Endaddress part as bold

    Hello, I want to format an Adrdess/Endaddress part as bold. Don't know how to do this. Thanks. Regards, Lars.