My iTouch won't turn on and the computer doesn't register it when plugged in.

The screen never went white or crashed, it just won't turn on. I tried plugging it into the computer but it won't register and the base of the iPod near the plug area got really hot. I don't know what's wrong with it or what to do. Help please?

Any charging icon when the iPod Touch get connected?
If no, you can let the iPod Touch connected with any power source, such as computer usb port, then press and hold the "sleep / wake" and "Home" button at the same time until you can see an Apple icon on the screen (usually take around 20 seconds)
Maybe you have to send it to Apple if still won't switched on.

Similar Messages

  • My ipod won't turn on and my computer doesn't recognize it, i have tried to reset it but it still won't do anything please help

    my ipod won't turn on and my computer doesn't recognize it, i have tried to reset it but it still won't do anything please help

    Try here.
    iPod Troubleshooting Assistant
    Make sure and select the correct iPod.

  • The CRT won't come on and the computer won't turn off. ???

    Hi all,
    I just got another free Rev. A iMac CRT today - it was in an old, abandoned school and the people who were moving everything out of the school thought it was dead, so they gave it to me. I tried starting it up, and it wouldn't turn on. When I took off the back to see if it had any good parts in it, it turned out everything was unplugged in the back, so I plugged it all back it. It worked great, I was deleting the school's files and apps so I could sell it, until a few minutes ago when I tried to wake it up from sleep. The display just wouldn't come on. I though it just wasn't waking up. I tried typing on the keyboard and clicking the mouse, and I finally pressed the power button on the keyboard, when I heard the normal beep it makes when you press the power button on the keyboard and it gives you the dialogue box "Do you wanna turn it off, restart it, etc?" I thought, "this is weird, why isn't the display on?" So I pressed the enter key, figuring that Turn Off was the option selected and that the display would come on when I turned it back on. Sure nuff, the computer turned off. I waited a few seconds and turned it back on. The display still wouldn't come on. I waited a few minutes til I was sure it was all the way booted up. It won't respond to the keyboard, the mouse, repeated jabs in the reset button on the side, or the power buttons on both the unit and the keyboard. I held down the power button for an entire minute and the display won't turn on and the computer won't turn off.
    This is totally bizzare. Does anyone know how to a) turn on the display or b) turn off the computer? It's looking like I'm going to have to unplug it and try again later.
    By the way, it's running 9.2.2, like the one in my signature line.

    I finally pulled the plug and restarted and it's working fine now. Does anyone know what happened? I think it could've had something to do with the PRAM battery; every time I've started it up it's said the date is January 1956 and the time is 9:55. hmmm...
    Edit: I just realized that in addition to the date being 1956, the hard drive was completely randomly renamed to "k hortdpc." ***???
    Another edit: I just realized I probably renamed the hard drive in my frantic random clicking and typing - I probably accidentally clicked the hard drive name and randomly typed a new name in my attempts to wake up the computer. oops

  • My itunes need a update and i pluged in my ipod awhile doing the updat now my ipod won't turn on and the screen has a itunes ion on it what should i do

    my itunes need a update and i pluged in my ipod awhile doing the updat now my ipod won't turn on and the screen has a itunes ion on it what should i do? i really need the help

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My macbook black shutdown during a thunder storm , what do i need to? it won't turn on and the charger light is not on green or on at all..have i fried it?

    my macbook black shutdown during a thunder storm , what do i need to? it won't turn on and the charger light is not on green or on at all..have i fried it?please help a.s.a.p...

    Most likely.
    You can try to boot from the Install DVD for your Mac and run AHT from there if it boots.
    If not it sounds like it is time to take it to Apple for repair.
    Allan

  • I was updating my ipad2 to iOS.5 version, and somehow the iPad turned of and the update was not finished. When i turned on the iPad the computer nor iTunes could recognize the iPad. I have windows xp. How can I solve this issue?

    I was updating my ipad2 to iOS.5 version, and somehow the iPad turned of and the update was not finished. When i turned on the iPad the computer nor iTunes could recognize the iPad. I have windows xp. How can I solve this issue?

    Try throwing it into recovery mode and starting over.
    http://support.apple.com/kb/ht4097

  • HT1349 My ipod touch won't turn on. The battery is not dead. When I plug it in to the charger or computer nothing happens.

    My ipod touch won't turn on. The battery is not dead. When I plug it in to the charger or my computer nothing happens. Does anyone know what to do?

    You might want to post your question over in the iPod Touch forums (this is iPhone): https://discussions.apple.com/community/ipod/ipod_touch.

  • I have a 32G ipod touch and it doesnt want to charge, turn on, and the computer doesnt even recognize it, how do i fix this?!

    i have a 32G ipod touch and it doesnt want to charge, turn on, and the computer doesnt even recognize it, how do i fix this?!

    - Seee if resetting the iPod will make it work or make it visiable in iTunes so you can restore it.
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next see if placing the iPOd n recovery mode will make it visible in iTunes.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • My i pod touch 4th gen will not power up. the battery is fully charged and the computer doesn't recognize that it is plugged in. What should i do

    my i pod 4th gen will not power up and the battery was fully charged about 5 days ago. it just won't come back on and the computer doesn't recognize that it is plugged in. what should i do? i tried to call apple and they wanted 30 dollars just to talk to me

    Have you tried a reset?
    Are you able to restore?
    iPod touch User Guide (For iOS 5.0 Software)

  • Running 10.4.11 and trying to restore OS9 as well as iLife etc. I tried to install iLifer from the original disc and the computer doesn't open the install program with the .mpkg file extension. Can you help?

    Running 10.4.11 and trying to restore OS9 as well as iLife etc. I tried to install iLifer from the original disc and the computer doesn't open the install program with the .mpkg file extension. Can you help?

    Hi Barbara,
    Try Pacifist...
    http://www.charlessoft.com/
    then extract/install what you need from your Install Disc.

  • When on a phone call when I need to enter numbers on the keypad, the screen goes black and the device doesn't register the numbers.  Sometimes it works, but most times not...very frustrating.  Any recommendations?

    When on a phone call when I need to enter numbers on the keypad, the screen goes black and the device doesn't register the numbers.  Sometimes it works, but most times not...very frustrating.  Any recommendations?

    Is there a case or screen protector that is possibly interfering with the proximity sensor (detects if the phone is near your face, allows the keypad/screen to be visible when the phone is away from your face)

  • Computer won't turn on and the power cord doesn't light up

    My problem with the computer is that it will not turn on. The battery is fully charged, power cord is plugged into a working outlet. I have held down the power button for 10 second or even longer. Nothing turns it on and the power cord doesn't light up at all. Any thing will help.
    Thanks

    First, check that your AC outlet has power. Second, see this article: Intel-based iMac- What to do if your computer won't turn on and this one Resetting MacBook and MacBook Pro System Management Controller (SMC).

  • My macbook air won't turn on and the led light on the cord doesn't light up

    I can't get my macbook air to turn on and the cord light won't go on, either. It was not dead last night when I shut it down . . . any ideas?

    Hello srsymington,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue where your MacBook Air will not power on, I'd like you to please reset the SMC as directed below.
    Resetting the SMC on portables with a battery you should not remove on your own
    Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer.
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    Cheers,
    Alex H.

  • Why does my computer (windows 7 w/iTunes12.0.1.26) not recognize my gen 4 iPod? Trying to sync to my computer and the computer doesn't connect to it... help?

    Computer running Windows 7
    Itunes 12.0.1.26
    iPod Touch 4 gen   ios 6.1.6
    Computer will not recognize device when plugged in to usb port
    yes USB port is working
    recognizes other devices
    will not recognize 2nd iPod gen 4 either
    help?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or                     
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • IPod Touch 5th Generation won't turn on and the home button is broken, followed the steps from another thread but it's still not working

    I have an iPod Touch 5th Generation with iOS 8.1, my home button is broken and I've been using AssistiveTouch for months now. Today I just locked my iPod and it wouldn't unlock again, it doesn't respond at all, it won't turn on. It was almost fully charged, so it's not the battery. I followed the steps from this thread, but I'm still getting the "USBMuxListenerCreate: No Error" message in CMD Prompt. I bought my iPod abroad and even though I do have the warranty, I've been told at the iStore that it's not valid here, so going to the store isn't really an option. Any ideas how to solve this?

    Sorry, but without a working home button it is not possible to reset or restore your device. You should visit an Authorized Appel Service Provider or Apple Store to get it serviced. The warranty for an iPod is not limited to the country where it has been bought, check here: one-year limited warranty
    Jailbraking the device will void the warranty.
    You can check the warranty status by inserting the serial number on this page: https://selfsolve.apple.com/agreementWarrantyDynamic.do
    A list of Authorized Apple Service Providers can be found here: iPod touch - Contact Us - Apple Support

Maybe you are looking for

  • Error -196736204 occurs when deploying shared variables?????

    When I try to deploy shared variables contained in a library named 'DAQ_sv.lvlib' I get the following message for each shared variable in the library. Deploying DAQ_sv.lvlib:exit \\192.168.1.100\DAQ_sv\exit deployment failed (error: -1967362041, IAK_

  • Import from iPhone stuck in the middle

    I tried to use 'force to close" but it threatened I will use all unsaved data. As I am not sure how many pictures I had nefore starting the import, how can I avoid loosing and be able to continue the import?

  • VI Conversion from LV5 -- LV2009 (or LV8.5)

    Hello, could someone please convert the VI so that I can open it with LV 2009 (of LV8.5)? Thank you very much! Solved! Go to Solution. Attachments: MonoMove.vi ‏65 KB

  • Smartforms table border lines not printing (URGENT)

    HI, I am trying to print samrtform table border lines on Epson dot matrix printer, in print preview it showing table borders as thick black lines, while printing it not printing lines. It is printing data correctly. Can any one suggest the soution, i

  • Wizard based programme

    Hi I am working on a designing a program for dirnking water pumping station. I want to know is it possible to create a wizard based program with LABview? i have industrial monitoring and control project which unknown number of pump and reservior. but