My itune keep saying cannot connect to itunes store, My itune keep saying cannot connect to itunes store
cannot connect to itunes store
Or
When connect your Apple ID is not for xxx country you must change to yyy country
What country are you in?
Try rebooting the ipad by pressing the home and sleep/wake buttons at the same time until the apple logo appears on the screen, then let go.
Similar Messages
-
my ipad is disabled permantly and i dont want to loose my pictures i keep going through the 5 steps and each time it says "itunes cannot connect to ipad because it is locked with a passcode" WHAT DO I DO PLEASE HELP ME. thank you. sorry about spelling.
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again. -
I cannot download any apps on IPhone 5. It keeps saying "cannot connect to itunes store" even when I am perfectly logged in Itunes Store and App Store. Please help !
I have this problem too since ios6 upgrade.
4S iphone I can connect to itunes on 3g and download an app no problem.
I can connect to wifi no problem and use safari , facebook etc...I can connect to appstore but cannot install any apps over the wifi. 'Unable to conect to itunes'.....
Driving me insane............. -
what do i do if my internet is wep and i need it to be wpa2 because my ipod touch 4th gen connects to the internet but when i click on safari or itunes it says safari cannot open the page because its not connected to the internet. i have contacted apple support and they said to change from wep to wpa2 but when i change it to wpa2 and type in password and connect on my laptop it says the saved setting on this computer for the network do not match the require ments of the network
My 2nd gen works fine with WPA2 and AES encryption.
You may need to go back and start over. Reset the router back to factory defaults, log on as the admin, set up security, DHCP, and make sure the IP address pool has enough IP addresses to lease to ALL of the computers/devices that will connect to that the router. -
iTunes Store for Windows. Everytime I try an access the iTunes Store it takes really long to connect and then it says iTunes store cannot be access. I think I am up to date with iTunes Verison, I Have 11.0.2.26 but no matter what I try it does not connect. HELP Please???
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
Why do i keep getting the message 'Cannot connect to iTunes Store' when I have done every connection I can find? What does the error message (-1202) mean when I am on the iTunes site on my computer?
Hi Velvalee,
While there may not be specific information about that error, here is an article of steps for troubleshooting connectivity issues with the iTunes store:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
If that article does not help, there is a link near the bottom for an additional article of advanced troubleshooting.
Cheers!
- Ari -
my ipod keeps on saying ipod is dissabled connect to itunes and whin i connect it to itunes it says i have to inter a passcode on the ipod to connect to itunes what do i do??
hi, may i know how to restore and put it on recovery mode??
as I faced the same problem as you now...
Thanks -
I cannot complete my iphone configuration after sofware update, when i connect to itunes i keep gettin a try again later message
That's usually a sign that your phone was hacked/jailbroken, and iTunes has detected such, errored out, preventing your phone from activating. Since Apple does not support hacking/jailbreaking, that's what happens, by design.
We can't help you here, as Apple owns this forum. You'll have to go elsewhere. -
my ipad says "connexion a l'Itunes Store impossible" when I click the App Store button. So, I cannot have access to the Apps. I have internet connection and I can use my emails and the safari. Please advise.
Try this:
1. Settings>General>Date & Time>Turn off set automatically
2. Set date one year ahead
3. Go back to iTunes and try again.
4. You will get the same error.
5. Go back to settings general date and time and turn back on 'set automatically'
Try connecting to iTune Store again. -
After iOS6 update, It says cannot connect to iTunes Store when I try to go to the app store.
How do I fix this on my iPhone 4S?Same phone and ios, same problem. Worked just fine for me Sunday, but nothing today, all day. As a workaround I found I can still connect using iTunes on my Macbook Pro, the I synch my iPhone. There are way too many people with the same problem for it to be anything but Apples problem. Hope this helps.
-
When I try to complete an in app purchase a message pops up saying: YOUR PURCHASE CANNOT BE COMPLETED.. I close that and another message pops up saying: CANNOT CONNECT TO THE ITUNES STORE... I am connected to the Internet, can anyone figure this out?
Hello,
Brother please follow these steps
1) SignOut from Your apple itunes account
2) Again Sign In Your iTunes Account
And you can turn off your wifi/internet from your iphone and again turn it on
Kind Regards
AmirKhalid (AKQ) -
I'm a new iPad owner. When I've rented a movie, I can't work out how to play it back without a wifi connection. I get a message which says you cannot connect to the iTunes store without an Internet connection. This happens whether I've rented or purchased a film. We're going on a flight soon and would ideally like to watch one on the plane. Can someone please provide some step by step instructions. Thanks.
Rented or purchased video are watched through the videos app after you have downloaded them, iTunes on iOS devices is for buying media only.
-
I can connect to all my Iphone applications, however I cannot to Itune store from my Iphne. A message saying: you cannot connect to Istore, your connection appears off, pops up. Help please
Hey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David -
I keep getting a pop up on my iophone 5 that says "connect to itunes to use push notifications" I've connected to itunes and nothing happens. I cant use the phone as I can;t get the pop up to stop
So after exhausting countless hours I just added the App "Google Search". It's not as great of an interface but I can access Google Voice and keep tabs by just checking in every so often. Better than not having Google Voice at all.
-
I updated my iphone4 to the 7.0.4 update. on my phone screen it says connect to itunes. when i connect to itunes my phone isnt doing anything. what do i do? i cannot use my phone!!!
Hey vsu16,
Does iTunes recognize your iPhone at all? It sounds like this is the image you're seeing on your screen to connect your phone to iTunes:
If that looks right, you'll want to follow along with the steps in here;
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
If you see the Connect to iTunes screen but the device does not appear in iTunes, follow these troubleshooting steps if you're using a Mac, or these steps for Windows computers.
Welcome to Apple Support Communities!
Best,
Delgadoh -
I accidentally uninstalled Quicktime from my computer so my Itunes was not functioning. It told me to uninstall my Itunes, then reinstall it. Which I did.
Trouble is, now it comes up with 'THE FILE "ITUNES LIBRARY.ITL" CANNOT BE READ BECAUSE IT WAS CREATED BY A NEWER VERSION OF ITUNES'...which I believe is because before I uninstalled my original Itunes, I had not completed the recent update to the newest version of Itunes, whereas the one I just installed is the latest one.
So THEN, I download the previous version of Itunes (iTunes 10.2.1(x64)) but when I try and run it, it comes up with the message that the thing '...IS NOT VALID WIN32 APPLICATION'.
Now I'm stuck and have absolutely no idea what to do. Please help!When iTunes updates, it should create a backup of your library file before updating.
You may be able to get back by using this article:
http://support.apple.com/kb/TS1967?viewlocale=en_US
When doing this, drag BOTH iTunes Library.itl and iTunes Library.xml to the desktop. You will need the xml file if the method above doesn't work.
In that case try this:
http://support.apple.com/kb/HT1451
Maybe you are looking for
-
How to increase the performance of a report
can any body tell me how to increase the performance of a report?//// i have prepared a report to show the expense detail .I have used BSIS and BSAS table. But whenever I am executing it is facing runtime error (TIME_OUT error ). Moderator Message: D
-
Dear all, I ve created a WF with user decision where as i used rule 168 .Wf starts fine and the problem is when it reaches this step it wont go the agent found by the role determination. I changed the agent part from into a user fro testing purpose o
-
Media turns black please help!!!!
Hello, I have had Premiere Pro CS5 for a while and I have had this particular problem ever since I started using it. Basically, I am making a video right? And I have imported a bunch of MPG videos to put into the timeline. But guess what? For some st
-
Xi sample Certification questions
hello all.. can some one pls provide me with the sample Certification questions for Xi... [email protected] any help wud be highly appreciated.. regards.. vishal
-
Rip a single angle from dual-angle DVD
I am trying to rip a single angle from a dual angle DVD we have produced. I don't want to transcode the footage, but rather just demux it to the two original elementary streams. I have tried using MPEGStreamclip, but it seems to interleave the two an