My iTunes 10.5 restarts immediately after I quit the program. How can I fix this?
It is very frustrating. I quit iTunes and it starts back up seconds later. It seems after I quit it 10 or more times, it will finally stop restarting. To my knowledge, this has only been occuring over the past few weeks and I'm pretty certain is was about the time I last updated iTunes. Maybe it's a coincidence and something else is to blame?
After searching this community, I found someone who had a problem like this on his Mac back in 2009 that turned out to be a third party widget he was running. I do not use any third party music related stuff on my PC (not a Mac). The only other music-related software I have is Spotify and Windows Media Player and they do not appear to interact with iTunes. I do not have any iDevice's (like an iPod or iPad) continuously hooked up that might be causing it to restart like this. I'm not wirelessly syncing my iDevices either.
I'm at a loss for what to do. I now have to decide if I really need to use iTunes at a particular moment, because I know I'll have to close the program up to ten times to get it to stay closed. Is this a known bug? Any solutions? I would rather not leave iTunes running in my system tray all day long and tie up resources.
App purchases will require you to pay applicable sales tax.
Similar Messages
-
I got a new laptop and I can't sync all my music onto iTunes without iTunes saying it will erase my songs on the phone, how do I fix this to where I can put all my music on my laptop?
If you do not have access to the iTunes Library on your Old computer... or its Backup...
See these 2 Links...
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991
If you do have access... See Here...
iTunes: How to move your music to a new computer -
when FF restarts my "browser.newtab.url" has been HIJACKED, it works fine if i reset it BUT on restart its back were it was ? HOW CAN I FIX THIS ? have reset it 20 times works fine while program FIREFOX Runs if program or OS shuts down its HIJACKED AGAIN.
there must be a file or location that is ONLY USED ON LAUNCH, That has been modified or hacked.
small clinch that is driving me nuts.
Thanks RMYWhat is "browser.newtab.url" changed to?
Knowing that may lead us to a solution as to what Malware your PC is infested with. -
I have reinstalled itunes multiple times but apple mobile device doesn't download. how can i fix this or download apple mobile device
Type "apple mobile device service" into the search bar at the top of this page by "Support" and read the resulting articles.
-
the computer recently ask me for an update for mavericks and after i did the update there a white smug in the middle of the screen. how can i fix this?
smug?
-
We have two iPad 2s and on one apps keep shutting down but on the other iPad the same app is fine. We have deleted the app, hard restarted and it still shuts down. How can we fix this?
got the same problem. did the hard reset but to no avail. mine is ipad 2 16gb ios 7
-
It keeps doing it over and over again, how can I fix this?
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
http://www.apple.com/itunes/download/
Does it go through properly this time? -
No exterior sound after IOS 7 upgrade. How can I fix this?
No exterior sound on iPhone after installing IOS7 upgrade. How can I fix it?
You can try resetting your iPhone by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists. -
My Music app that comes with the iOS immediately quits right after opening it. Is there a way to fix this? Can I reinstall the app? I know it cannot be deleted like another app as it comes with the phone.
Hi aragon7,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like an app closes when trying to open it. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Use iTunes to restore your iPhone, iPad, or iPod to factory settings - Apple Support
Cheers,
Mario -
PC is recognizing iPod but iTunes isn't after most recent update. How can I fix this?
My iTunes updated days ago and after that my 4th generation iPod Touch couldn't be recognized on iTunes but my PC can recognize and it sees that it is an iPod Touch. I read on another forum post that stated if I renamed my iPod Touch to something else but I couldn't rename it. Has anyone had this issue?
http://support.apple.com/kb/TS1538
Megadave020 wrote:
Has anyone had this issue?
Instead of asking silly questions, search the forums. -
Itunes.exe is causing a runtime error of R034. How can i fix this?
iTunes.exe is causing a runtime error of R034. Using PC with Windows 7.0
Can anyone help me fix this problem? Cannot open itunes at all.First try updating to iTunes 11.1.5.5, using an installer downloaded from the Apple website:
http://www.apple.com/itunes/download/
If you still get the errors after that, try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
"iTunes cannot read the contents of the ipod", How can I fix this?
Hello everyone, I am having trouble with my iPod touch 32GB and getting iTunes to detect it. I'm using Windows 7.
When plugging it in tonight, I got the message "iTunes cannot read the contents of the iPod (Name). Go to the summary tab in the iPod preferences and click restore to restore this iPod to factory settings". I attemped to do this, but I then got an iTunes error "3184" and was unable to install the iPod software.
I've tried...
- Using a different computer
- Using a different USB cable
- Rebooting the iPod
Nothing seems to work. I've read a solution as to delete one of the iTunes files on the iPod, but the iPod doesn't show up in my Windows Explorer, so I am unable to do this. The computer does however charge the battery when I have the iPod plugged in. I'm also able to still listen to music on the iPod as well.
One other note, I had the same thing happen to my previous iPod touch. I got my original iPod touch back in December 2010. In October 2011, the iPod just died one day and I was not able to turn it on at all or charge it. When I'd plug it into the computer, I got the exact same errors and was unable to restore the iPod. I sent it in to Apple as it was still under warrenty and they sent me a replacement. Now 3 months later it's happened again. Of course the warrenty starts from the day you purchase the original, so this is no longer under warrenty despite having it for only 3 months. The only difference this time is that the battery still charges and I can still turn it on and listen to music.
Any ideas?
Thankshi Angie!
hmmm. is there an Apple Store convenient where you can take the ipod for a check-up?
love, b -
Itunes on my windows 7 pc does not Air Play. how can I fix this?
How can I make Air Play on my windows 7?
Hello Raag Thaal,
I would be concerned too if my music didn't playback in iTunes. I found an article that specifically addresses issues with the music not playing and the playhead not progressing in iTunes. I recommend following the steps in the article below:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/ts1362
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I need help. I cant update my apps because of I cannot connect to iTunes store. I have tried all suggestions with no success.
Ok, I found a solution that worked for me when trying to connect to the iTunes store by tapping the "update" button in the "App Store" app on my iPad 2. Before the solution was implemented I'd always get the error message "cannot connect to iTunes store". Once the solution was implemented I now can connect to iTunes using the "update" button in the "App Store" app and I get the normal message "All apps are up to date". The solution is this: go into Settings, then General, then scroll to the bottom where it says Date and Time. Tap Date and Time and then turn OFF Set Automatically. When you do that a new option will be added that says Set Date and Time. Tap it. You'll now get a drop down feature. Set the Date AHEAD 2 YEARS. The Time you can leave alone.
Once you do that you might get a bunch of reminders and messages that your apps and stuff haven't been updated in two years. Click cancel or close on each of those messages or reminders. Now go back into Settings, General, Date and Time, and turn Set Automatically back to ON. Reboot your iPad. Open the App Store app again and go to the Update button. It might ask you to log back in to your iTunes account. It should now work. If not, close the App Store app completely and open again and try the update button. Hope this helps. -
We updated our computer a while back to 10.9.2, but once it was complete we no longer use excel or word as the files were missing for them, plus our epson printer wouldn't work, it said something like the files for this printer could not be found, we tried to reload the printer using the disc as the printer was less than a year old but the computer would not load it probably, I called epson and they replied that there was a problem with the update and has done something to the mac driver, has anyone else had a problem with this update? and can it be sorted
Don't use the CD--it is almost always out of date. Just add the printer using Print & Scan System Prefs and it should find the correct drivers.
If not, go to the Epson website and download the current ones.
If you need the bundled software that comes on the CD, download it from Epson.
What version of Office was it? 2004 won't run on any OS after 10.6. Office 2008 and 2011 will run.
However, it should not have deleted any of your Documents.
If it was Office 2008 or 2011, try reinstalling it. I've found that Microsoft products have a hard time with change. It's like when you remove the pagoda from a goldfish bowl. To the goldfish, the world around them has changed and they freak out. Sometimes you can calm down the Microsoft products by reinstalling them.
Maybe you are looking for
-
I just purchased my MacBook Pro in February of this year, I visit a celebrity blog website quite often using my Mac and I've noticed that once I am on that page it refreshes on its on and it'll open up a new window advertising Japanese dating. Is the
-
I want to know how to send and HTML page generated by a servlet into a specific frame of the client browser.
-
The HTC One, It's Coming To Verizon!...
According to VZW @VZWnews on Twitter. The HTC One will be out later this summer.
-
Ipod touch version 4.2.1 wont update to newer version
My ipod touch version 4.2.1 won't update... I connect it to itunes and it says that it is up to date.... can anyone help ??
-
Case Expression in when clause
I am doing a query to filter out depto 20 and inside the case deptno 30 only if sal = 1500. Its working fine. I just want to do this without end=1? is there any way. select * from scott.emp where deptno not in (20) and case when deptno = 30 AND sal =