My itunes app updates wont work, help please?

HI, i recently created a new apple ID due to my old one being disabled. I have quite a few much needed updates, which include paid and nonpaid items. (irrelevent?) My new ID works in all feilds except updates. When the verification box pops up it uses my old email as my username and I cannot find out how to change that in order to update my apps. The iTunes store itself shows that it is using my new ID, how can I change the username in my verification box inorder to update?
*may I add that I have tried turning on and off my iPhone, and resetting my ID in my computer too.*

Hi Everyone,
The same has been discussed in the below mentioned link:
http://forums.adobe.com/message/5509684
You may also contact Customer/Chat support:
http://www.adobe.com/support/download-install/supportinfo/
Let us know if this helps,
Regards,
Gurleen

Similar Messages

  • HT201493 I can't sign in to find my friends , it says I have no Internet connection but I do , the app used to work , help please

    I can't sign in to find my friends , it says I have no Internet connection but I do , the app used to work , help please

    when you say there is an Internet connection have you used safari?  Or does the phone just display a data connection (i.e. 3g/4g)?  You could try a couple of things if it is the latter 1. turn off cellular data than turn it back on.  2. turn on airplane mode and turn it back off.  I type these assuming you've tried resetting network connections.

  • Safari 2.0.4 with upgrade to 10.4.11 wont work, help, please

    I am just beside myself. Safari wont work. I have broadband and all is well there, I've run disk warrior, all is well there. I've run disk first aid to check and verify disk. All well there. I upgraded to OS 10.4.11 from Upgrade on my g5, and safari wont load its face page; it just hangs pale blue highlight over half of this phrase "Go to this address."
    I have tried everything I know. I am just so disappointed in apple. So not understanding what to do. I am not computer saavy and this is such a disaster; this is my computer for my work; I'm a work at home mom.
    Please can anyone help me? I read people saying third party things, but I do not know what they mean or what those 3rd party things are by name.
    I'm sorry to go and on, I am just so upset, and could kick myself for being so naive about thinking oh, a nice upgrade, no problem
    sigh
    sincerely
    kub

    Looking for a answer to help you may work better if you posted this in a better section of this forum, this sectionis for the iPhone not desktops, use the below link to find a better suited forum area
    http://discussions.apple.com/index.jspa?categoryID=1

  • My iphone wont work help please

    my iphone is frozen at the apple logo and it wont work and turn on or i tried restoring it but it wont work can apple help me please?

    What, exactly, happens when you try to restore it?

  • Itunes simply wont open ive tried everything even spoken to experts but it wont work help please...

    need massive help itunes hasnt opened for months now and need it to work but i CANNOT loose my music and pics etc so dont know what to do and i cant get ios5 without it ive done everything please help!!!

    need massive help itunes hasnt opened for months now and need it to work but i CANNOT loose my music and pics etc so dont know what to do and i cant get ios5 without it ive done everything please help!!!

  • Itunes store wont work HELP PLEASE! HAVE HAD THIS PROBLEM FOR 4 MONTHS!

    everytime i go to my itunes store it tells me that something is wrong with the network connetions and i need to check my network setting and i aready ran a diagnostics test for itunes but everything was fine and if i put my firewall on it sti says the error and if i turn it off it still tells me that.
    Message was edited by: homee

    Make sure Norton has all the most recent updates. Then go into Norton, delete iTunes from the allowed programs, and save the Norton settings and close Norton.
    Then go back into Norton and add iTunes like it is a new program, and save the settings.
    This has worked for lots of folks.

  • App Update Wont Work IPhone 3GS

    My email is signed in to the app store on my iphone 3GS I can download apps and my email shows up asking for my password like always I put it in and it downloads but when I try to update apps my brothers email address pops up and asks for the password iv tried entering my password and it doesnt work and my brother wont give me his password so what should i do to get his email off and mine back on? PLEASE AMSWER IMMEDIATELY!!!

    Is his email registered in the mail application?
    If yes, go to settings, 'mail, contacts, calendar' and the mail application users will appear. To delete them, just click on the email, something will pop-up, scroll down and there will be an option to delete it.
    Otherwise, you're brother will have to enter his password.

  • Itunes all versions not working, help please!!

    I was bought an ipod classic for christmas, hoping I could just pop a cd into my pc and transfer songs straight on to it...If only if it was that easy!
    I downloaded one of the latest itunes, in which it then told me I needed service pack 2 in order to run it. So I installed that, and low and behold itunes was working. After turning my computer off for the night, I soon discovered the next day that service pack 2 had caused my computer to go haywire...so I uninstalled itunes and service pack 2 and went looking for a version of itunes that did not require service pack 2. I installed version 6, after making sure there were no old itunes or quicktime player files lurking around. After I installed it, it would not open but came up with an error message. So I thought I would install version 4 and then hopefully click on 'update itunes'. Yet again it will not open, this time an error message about quicktime player pops up..I have had this ipod now for over a week, and there still isn't any music on it! would really appreciate some help!
    Thanks,
    Penny

    "quick time Player has encountered a problem and needs to close. We are sorry for the inconvenience".
    The broken QuickTime is most probably causing the iTunes problem. (iTunes needs a properly functioning QuickTime in order to work correctly.)
    Let's try swapping out your QuickTime again, taking a few additional explicit precautions this time.
    Head into your Add/Remove programs. Uninstall QuickTime.
    Next, we’ll manually remove any leftover program files and folders.
    1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
    2. In My Computer, open Local Disk.
    3. Open Program Files.
    4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
    5. Navigate to C:\Windows\system32\.
    6. Remove the files QuickTime.qts and QuicktimeVR.qtx. (If “Hide filename extensions for known file types” is enabled on the PC, then those two files will appear as “QuickTime” and QuickTimeVR”.)
    7. Restart your computer.
    Next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
    Switch off antivirus and antispyware applications prior to the repair install.
    Go into Add/Remove and select itunes. Click "Change" and then click "Repair".
    If the repair install goes through okay, restart the PC and try launching itunes again. Does it launch properly now?

  • Updates iOS on iPad via iTunes.  Update bricked iPad, help please?

    Running latest version of iTunes.  Got a notice to update OS on my iPad 2.  So I followed the instructions.  Halfway through the update bricks my iPad.
    No computer recognizes the iPad.  iPad screen displays the "plug me into iTunes".  iPad won't turn off or restart.
    Tried several different computers with iTunes....none recognize iPad being plugged in.
    iPad 2, 16 GB model.  Was running the previous version of iOS until today.
    Any help welcome.
    EDIT: Tried posting in iPad/iTunes help. Apple: You are not allowed to create or update this content, so posting here, apologies if wrong area.

    TThere are a lot of posts like yours here. look through old posts from the last week or so. You can tap on View More towards the bottom of the main page. I don't recall a cure that works. Doesn't look promising but good luck.

  • Error 11333? Check for updates not working, help please...

    I got the message 11333 when I tried to open iTunes for the first time, so I checked for updates. But when I "check for updates" in iTunes, it tells me that "server could not be contacted, check your internet connections and try again". I am connected to the internet and I'm able to surf the web, so what's going on? I'm working with a PowerPC G5 with a dual processor. Version 10.5.8

    Already answered in your duplicate thread:
    https://discussions.apple.com/message/19062041#19062041
    Please do not double post the same question.

  • All Applications quitting unexpectedly or wont work - help please!

    Every application I try to open (or at least those that communicate in some way with the internet, I think) quits unexpectedly or simply doesnt work and I have to force quit.
    Most will close with a problem report. With Safari, I have to force the quit.
    Those applications that quit unexpectedly all have the same message under 'Application Specific Information' which is:
    'Terminating app due to uncauht exception 'NSInvalidArgumentException', reason '-[NSCFArray length]: unrecognized selector sent to instance 0x166678820'
    I know its a long shot, but does anyone know how to help with this?

    How much hard drive space do you have?
    Check Software Update to make sure you have installed all the latest Apple updates.
    Disconnect all peripherals from your computer. Boot from your install disc & run _*Repair Disk*_ from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
    Select your language.
    Once on the desktop, select Utility in the menu bar.
    Select *Disk Utility.*
    Select the disk or volume in the list of disks and volumes, and then click *First Aid.*
    Click _*Repair Disk.*_
    Restart your computer when done.
    Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer when done.

  • I Phone 3GS wont work :/ help please :)

    Hi, my I phone 3gs showed that i need to download the latest software update, so i tried to download it, my phone crashed, so tried to restart, and now its just switching on showing the apple logo and switching off and then repeating the process, what can i do ?.. please help..

    Your phone has entered recovery mode.  You will need to connect it to a computer with iTunes and restore it to factory settings.  Hopefully you have a backup (either iTunes or iCloud) to restore from.
    HTH

  • My menu bars go invisible and wont work, Help please?

    Ok, the problem is that the menu bar on the top of the screen, you know where it says "file" "Edit" "Image" etc. will not work. When I click on "file" the window that opens basically becomes see through and I'm not able to click on anything like "save". My main concern is my Photoshop as I have work to do in it, but the same thing happens with my Adobe Audition, Reader, and basically every other Adobe program. I'm really in a pickle here as I have to turn in 2 canvases by the end of today. Can someone please me fix this?
    Thanks in advance.

    Sounds like a popssible display driver and/or resource problem.
    What version of Photoshop are you running?
    What operating system and video card do you have?
    Have you rebooted, and does the problem recur after?
    Is this issue reproducible or intermmittent?
    Do you have any 3rd party plug-ins installed?
    -Noel

  • Facetime on my ipad has stopped recognising my apple password, and so wont work, help please.....

    facetime on my ipad has stopped recognising my apple password, and so is unable to be activated.
    any ideas please?

    Hi foxylady2, 
    Thanks for participating in the Apple Support Communities. 
    If you're not able to sign in to FaceTime on your iPad with your Apple ID password, the tips in this article may help:
    FaceTime, Game Center, Messages: Troubleshooting sign in issues - Apple Support
    The troubleshooting suggestions in this article can be helpful as well in a situation like this:
    If you get an error when trying to activate iMessage or FaceTime - Apple Support
    Best Regards,
    Jeremy 

  • When i plug my ipod in, it shows up on desktop as a hard drive, but wont show up on itunes. All my music/videos everything has been wiped off somehow, restored it and still wont work! Please help!

    When i plug my ipod in, it shows up on desktop as a hard drive, but wont show up on itunes. All my music/videos everything has been wiped off somehow, restored it and still wont work! Please help!

    - Have you tried the troubleshooting here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    - You can try disabling the camer notification
    http://support.apple.com/kb/TS1500
    - Do you have any camera, scanner or similar software installed?  That may prevent iTunes from seeing the iPod.

Maybe you are looking for

  • Multi-users on one computer

    How do I set up 2 Ipods to be used on one computer??? My ipod is on our desktop PC, and my husbands is on our laptop... I want to move his ipod and library onto our PC, but I can't find any guidance on how to do it without screwing up mu library!

  • How to use multiple Windows in a module in oracle forms

    Hi,    I am new in oracle forms.I am using oracle forms 11g with weblogic server 10.3.5 at windows7.I have 2 canvases say CNVS1 & CNVS2 and two windows as Window1 & Window2. CNVS1 is attached with Window1 and having BL datablock. CNVS2 is associated

  • Using variable as table name in pl/sql query - Is possible?

    I am relatively new to PL/SQL and I am trying to create a function that accepts a table name and a rowid as arguments and returns a comma-delimited record string of the values of the table/rowid being passed. The problem is , I cannot code a select s

  • Adding Keyboad to Windows 7

    Do i need to add a lang pack if i am just adding keyboard? Just adding InputLocale in the unattend.xml file.  Worked in SCCM/MDT task sequence but failing in SCCM.  Is it looking for DISM to apply lang pack and this is the reason it needs MDT? Did i

  • Implement the web-service API on an external service desk

    Hi, I want to implement the web-service API on an external service desk system. I am working with the IMG and got to the point where I define a logical port. At this point I need the web-service to be implemented on the external system. I have web-se