My itunes can't see my iphone 4 after i make ubdat for iphone and itunes also ?

my itunes can't see my iphone 4 after i make ubdat for iphone and itunes also ?

Hi there 3eboo,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W.

Similar Messages

I can't see the epma component in workspace even its up and running also ca

i can't see the epma component in workspace even its up and running also can't see the planning applications in workspace even i log in as admin

Has it ever worked, anyway try running the config utility again and configure the foundation web server
Cheers
John
http://john-goodwin.blogspot.com/

Itunes can't see my apps after windows 7 install

I had a free upgrade to windows 7 with my laptop. I lost everything on itunes as a result. My itunes can see the iphone, but it doesnt recognise it as my iphone, so I can't see the apps etc on it.
How can I get itunes to recognise the iphone as mine again?
Thanks
heatfan8

iTunes>iTunes Store>log in
Click the Store menu>Authorize Computer
enter password and click Authorize
iTunes thinks this is a new computer after the upgrade to Windows 7.

No Content in iPod part of iPhone after syncing with OS 3.1 and iTunes 9

My iPhone was working fine and I upgraded to iTunes 9 and OS 3.1 and then all of the sudden no Content in iPod part of iPhone after syncing. It shows the music there as far as the capacity is concerned but nothing shows up on the phone. I turned off Sync Music and my podcasts and movies then appear on my iPhone but when I try to Sync Music again it blanks. I then tried only select playlists which seemed to work except when I went to add the largest playlist then No Content error again on my iPhone.

Same problem here.
I had my contents playing from the application iPod in my newly "clean" updated iPhone 3G, then I downloaded 3 podcasts from the iTunes Store in my iphone over wifi and the next time I launched "iPod" the screen read "Updating library" and then only the 3 new podcasts were shown no other contents is available, and the information menu from the settings reads 0 songs but the available disk space is relevant with the songs still being on the iPhone.
In addition, I have to say that iPod, especially the podcasts section, felt more sluggish than on the previous version.
I look forward to a fix.
Best regards,

HT1933 I paid for an app which said I can watch certain tv channels,after paying£1.49 for it and downloading it ,I see it hasn't got the channel which app developer said I can watch,hw can I get my refund?

Hw should I get my refund from Persian tvbox?

You've contated the developer ? If you have and they can't/won't help then then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Itunes can't see my iphone

Itunes can not see my iphone under the devices. Recently used Windows Parallel on my Mac but made sure to de-select the USB in the parallels application and clicked associate this device with Mac OS and not the windows os. I have tried un-installing iTunes, reinstalled with most recent edition. Recycled the iphone on / off. Removed the iphone from the docking cradle to direct connection with iphone to usb and no hubs, cradles etc.... in between iphone and computer without any success. I know the mac and itunes are working correctly because it syncs my ipad, wife's iphone 3gs and kids ipod touch without any trouble. I looked in the hardware listing in the system preferences and the usb lists my iphone as attached. With the iphone 4 plugged in I rebooted my mac hoping it would auto open itunes and auto sync but no luck.

Hello Barbara4090,
When the iPhone unmounts from iTunes during the backup phase, it can be due to some unreadable data on the iPhone that iTunes cannot deal with. It could be data saved by a third party APP on the iPhone, but there's no easy way to determine the what data may be causing the issue.
First try resetting the iPhone by holding down the sleep/power button and home button until you see the Apple logo (ignore the "Slide to Power Off" prompt).
Connect to iTunes and Sync to test.
Next would be to determine whether the issue is actually with the iPhone or the MacBook Air.
You mentioned that you also use an iMac.
If the iMac is running at least 10.4.11 and has a current installation of iTunes 8.0.2 on it, you can use the iMac to isolate the source of the issue.
If you have essentially the same information on both computers, you can do this test in the existing user on the iMac.
If you'd prefer not to intermingle any data from the iPhone you can create a new User on the iMac and test:
http://support.apple.com/kb/HT3309
Before connecting the iPhone to the iMac, put a check in the "Disable Automatic Syncing for iPods and iPhones" in the Devices section of iTunes Preferences.
Connect the iPhone and then right-click or control-click on the iPhone under Devices and choose "Backup."
If the iPhone cannot be backed up on the second computer, then it is due to some unusable data on the iPhone that cannot be backed up.
After the test, you can delete the new User if you created one.
If that is the case, then you may need to restore the iPhone and choose the option to restore from a previous backup at the end of the restore process:
http://support.apple.com/kb/HT1414
I would do this on the computer that you normally sync the iPhone with.
If, on the other hand, the iMac can backup the iPhone successfully, then there is possibly an issue with the MacBook Air or it's software:
http://support.apple.com/kb/HT1224
Hope that helps,
Charles H.

Disconnected my iphone after software upgrade but while photos and my movies were still downloading. Now I get an error message that iTunes can't connect to the phone. How do I solve this?

Disconnected my iphone after software upgrade but while photos and my movies were still downloading. Now I get an error message that iTunes can't connect to the phone. How do I solve this? I am using a PC and have version 4.3.4 on my iphone 4.

In order to use ''nxm://'' links, Nexus Mod Manager must be installed and associated with the ''nxm'' protocol.
* http://www.nexusmods.com/skyrim/mods/modmanager/
In case of problems with this third-party program, please refer to its support forum:
* http://forums.nexusmods.com/index.php?/forum/1413-nmm-code-development-chat

I am unable to sync my iPad after upgrading to latest operating system. iTunes can't see my iPad when attached to PC. Anyone else having this problem?

I am unable to sync my iPad after upgrading to latest operating system. iTunes can't see my iPad when attached to PC. Anyone else having this problem?

Nicholas...
You may need to restart the Apple Mobile Device.
Follow the instructions here > iOS: Device not recognized in iTunes for Windows

Itunes can't see Ipod - what to do?

It might asimilar problem as many of you have posted. I purchased Ipod classic in dec. 2009 and it worked fine. Then yesterday I wanted to download some more music to put on my Ipod Classic. when I opened Itunes it said it had upgrades and I did the updates. After this nothing works! There are no songs anymore on my Ipod and when I connect it to my computer, the computer can see it and it says there are no error to the hardware, but itunes can NOT see it!! When I connect my Ipod to the computer Itunes do not work at all. I have tried to reset it as described in the manual and I have tried to reinstall itunes on the computer, I have tried it on a new computer and so on, but nothing works! HELP!
Have only had the Ipod for 2 months and it wont work anymore. Any suggestions how to cure this problem?
Thanks in advance for the help!
Karina

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Tryed to update my iphone4s, the update fail, now itunes can not see my phone

tried to update my iphone4s, the update fail, now iTunes can not see my phone

Hi kjpservices,
So it sounds as if your iPhone does not appear in iTune after a failed update to iOS, is that right? In order to get it back into iTunes you will want to use one of these articles, depending on what kind of computer you have -
For a Windows PC, use this -
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If you are using a Mac, use this -
iOS: Device not recognized in iTunes for OS X
http://support.apple.com/kb/TS1591
Once you get ths iPhone back into iTunes, try the update again. If it fails, post back and we can continue troubleshooting from there.
Thanks for using Apple Support Communities.
Best,
Brett L

I reset and erased my iphone 4 and now I can`t reinstall it! After I choose a language, region. and wifi, it says Please, try again later or contact customer care

I reset and erased my iphone 4 and now I can`t reinstall it! After I choose a language, region. and wifi, it says Please, try again later or contact customer care. I tried to do with iTunes, and iTunes even sees this iphone, but it`s like blank, there is nothing I can do in iTunes. It uploaded last software for this iPhone 4, but when it tries to do the reserve copy of iphone first, it shows a mistake. And ask to disconnect and connect the device again, which, obviously, doesn`t help.

This usually happens if the phone has been Hacked / Jailbroken / Modified...
Is this the case...?
If so...
Then... Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere.
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743

ITunes can't see iPod Classic

I have an iPod Classic (120 GB)
It asked me to recovery with iTunes.
When I connected it to iTunes it asked me to download last FW version,
but in that moment I had no internet connection,
so I choose to use the resident version.
Then the iPod has been recovered and it works. But obviously was empty.
After that, the computer see the iPod as a driver,
but iTunes can't see it.
I try with another pc, and is the same.
The tutorial on Apple web site, give a lot of information to try to restore iTunes,
but my problem is not on iTunes, is on iPod!
There is a way to force iPod to recovery mode? Now I have the internet connection again...
Thank You for your help
(and sorry for my english)
Samuele

Are these music videos located under Videos on your iPod? Do it play other regular movies (if you have any on the device)?
B-rock

I did the update today and now itunes can't see my ipod, uninstalled iTunes and all the recommended things, nothing has worked

I did the update today and now itunes can't see my ipod, uninstalled iTunes and all the recommended things, nothing has worked.
It worked just fine last weekend. I have windows 8.1 and a brand new pc, new iPod also, the new Nano. now after the update today, iTunes says iPod has been detected but could not be indentified properly. I can see it in windows. I tried the reset on the iPod also. what else can I do?? HELP

uninstalled iTunes and all the recommended things
Doublechecking. Have you tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

HT201272 Can't see my purchases in the appstore on the iphone ... How to be?

Can't see my purchases in the appstore on the iphone ... How to be?

Hi Antonfromsamara,
Thanks for visiting Apple Support Communities.
If you don't see any of your past purchases from the iTunes Store, be sure you're signed in with the correct Apple ID.
See this article for help with viewing and changing your Apple ID (iTunes Store account):
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
Best Regards,
Jeremy

How to join tracks when iTunes can't see the CD

I have a convoluted issue.
From this post <http://discussions.apple.com/thread.jspa?messageID=4567334&#4567334> I understand that in order for iTunes to see my CD it needs to be in Standard format. (In my case the files are MP3s and a Windows Executable.... On my windows machine it auto-launched MusicMatch.)
Most of the time, the work-around of selecting the files in the Finder and dragging them to iTunes would be fine.
Unfortunately, the 43 tracks on the CD in question are an audiobook which I'd like to join together as ONE track. From other posts I've read, I understand the only time one can join tracks is when importing from the CD in iTunes.
Since iTunes can't see the CD, is there any other way to join the tracks?
I have several CDs worth of audiobooks and would hate to have 17 gazillion tracks floating around my iTunes and iPod....
Thanks for any help you can give me.
-Peggy
G5 iMac Mac OS X (10.4.9)

I've found a work-around. It's not exactly a zippy process, but in the end I did end up with a conjoined bookmarkable AAC file rather than 43 separate MP3s.
At <http://aldoblog.com/audiobooks/itunes/importing-mp3-cds/> I learned more about the settings needed for importing my tracks to iTunes. Unfortunately, using the .m3u file didn't work for me but it may for others. (I suspect it was because the CD was created with MusicMatch in mind, rather than iTunes.)
The FAQ at aldoblog.com gave me my next ray of hope.
<http://aldoblog.com/audiobooks/itunes/frequently-asked-questions/#q5>
Here I found a link to Doug Adam's "Join Together" which can stitch together tracks after they've been imported into iTunes.
<http://dougscripts.com/itunes/scripts/scripts07.php?page=1#jointogether>
I hope this helps someone else trying to do this...
-Peggy
G5 iMac Mac OS X (10.4.9)

My itunes can't see my iphone 4 after i make ubdat for iphone and itunes also ?

Similar Messages

Maybe you are looking for