My Itunes continues to have an error when trying to open and Windows closes the program. I have uninstalled and re-installed several times but continue to get the same error. HELP?

Windows shuts down my itunes evrytime I try to open it because of an error. I have unistalled and re-installed several times with the same results. HELP???

what's the error specifically
or does it say itunes has encountered a problem and needs to close because if that's the case then try these steps
-download and install quicktime at the apple website
or
http://support.apple.com/kb/TS1717

Similar Messages

I updated ipad 4.3 to io7 but now when I go to set up it keeps asking me to restore - I have done this from itunes several times but it still gets stuck at this point in set up - help!

I updated ipad 4.3 to io7 but now when I go to set up it keeps asking me to restore - I have done this from itunes several times but it still gets stuck at this point in set up - help!

All media and apps should be in iTunes on the computer. Simply select the content desired to sync to the device and sync it.
FYI, backups have never included media or apps.
Downloading past purchases from iTunes

HT1925 I have upgraded to itunes 11.3.8. My library is showing, however I can't log onto itunes. I have logged in with my apple id, but it doesn't come up. Help?

I have upgraded to itunes 11.3.8. My library is showing, however I can't log onto itunes. I have logged in with my apple id, but it doesn't come up. Help?
When I click on itunes store within itunes, the screen comes up blank. I'm using a macbook pro.

I have the same problem. Unfortunately, the troubleshooting link you added has the first step listed as "Verify that FaceTime is enabled in FaceTime > Preferences" which we (the original poster and I) can't do as our Preferences are greyed out. We can't click on them to verify anything.
In FaceTime itself it's verified my apple id (also double checked via the site) and then it says the email is "verified" but then it freezes and after a minute or so it says "Could not verify the email address. Please check your network connection and try again."
After checking the network connection, it still doesn't work. It's rather frustrating as it all worked fine until about a week or two ago.
Any help would be appreciated.
-H

Just download lightroom cc and not open at all. Have desistarei and will install several times and the problem continues ... I need a solution .. thank you Operating System Windows 7 64bit

just download lightroom cc and not open at all. Have desistarei and will install several times and the problem continues ... I need a solution .. thank you Operating System Windows 7 64bit

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

I trying to download itunes on my laptop several times but I keep getting a Quick Time error -2096. How do I remove this error?

I trying to download itunes on my laptop several times but I keep getting a Quick Time error -2096. How do I remove this error?

Do you see the problem if you turn off Compatibility Mode for QuickTime?
Right-click on the QuickTimePlayer application (located in C:\Program Files\QuickTime) and choose Properties from the shortcut menu.
In the Properties window, click the Compatibility tab
Deselect all checkboxes currently selected in the Compatibility tab.
Click Apply.
Close the Properties window.
Check out this Apple document -> Error -2096 message when opening QuickTime for Windows in Compatibility Mode

My apple ID password works for all of my devices but one. i only have one account and have changed the password several times but still cannot get it to work on my iPhone. any suggestions would be appreciated.

My apple ID password works for all of my devices but one. i only have one account and have changed the password several times but still cannot get it to work on my iPhone. any suggestions would be appreciated.

Thanks for the suggestion, Chris. I actually did not resolve the issue which is why i did not post an answer.
it turns out that my iphone seems to default to an incorrect User ID (it defaults to an @me account, which is not something that i have ever used).
even when i change the User ID in my settings for the iTunes store, it still appears when i attempt to get updates for my existing apps. however, it does seem to use the correct ID when i attempt to purchase new apps.
If someone actually had an answer to correct this, i would love to update my existing apps.
Thank you.

I recently download a song with my IPOD Touch 4G. The song appears in my iTunes music library but not on my IPOD. I've tried syncing several times, but I cannot get it to transfer to the IPOD. Any suggestions??

I recently download a song with my IPOD Touch 4G. The song appears in my iTunes music library but not on my IPOD. I've tried syncing several times, but I cannot get it to transfer to the IPOD. Any suggestions?? (This has never happened before to me)

Use 3rd party software like:
http://www.digidna.net/products/diskaid
http://www.wideanglesoftware.com/touchcopy/index.php
For items purchased (including apps) from iTunes:
http://support.apple.com/kb/HT1848

HT5312 I have forgotten the answers to my apple security questions. I have tried several times but just cant get through and I need to make a purchase for the first time

I have forgotten the answers to my apple security questions. I have tried several times but just cant get through and I need to make a purchase for the first time

I am having the same problem. I know my apple ID and password but do not remember my security questions. How do you go about changing the security questions? Please help.
Thanks.

Hi..I purchased a Pantum p2000 printer and I cannot use it. It gives me an error ( Stopped, Filter failure) I tried to re-install the driver several times but I still get the same message. I'm using OS X Yosemite 10.10.1

Hi..I purchased a Pantum p2000 printer and I cannot use it. It gives me an error ( Stopped, Filter failure) I tried to re-install the driver several times but I still get the same message. I'm using OS X Yosemite 10.10.1

If you haven't done so already, try resetting the printing system.
OS X Mavericks: Reset the printing system also Yosemite

PCManFM Segmentation fault when trying to open two windows

Hi
It seems to be a bug, but I don't know if it's Arch, or upstream related, so first of all I will post here.
What happens: When trying to open two different windows of the file manager PCManFM, it crashes systematically.
How to reproduce: Open an terminal, type "pcmanfm"; pcmanfm is now open. Open another terminal, or another tab, type "pcmanfm"; pcmanfm is now closed. Go back to the first term, and you'll see "Segmentation fault"

ozar wrote:While PCManFM is broken and rather annoying, note that you can open new tabs and windows from within the PCManFM window that already have open.
Yep, I'm using this function since I noticed that bug but it'll be cool if this problem could be fixed in the near future ^^

New iPhone 5 "not subscribed to a mobile data service". I have reset mobile network setting several times but issue persists.

I am having a similar problem with my new iPhone 5. I just bought it few days back but unable to use the internet. I am getting a message "not subscribed to a mobile data service". I have reset mobile network setting several times. But the problem doesn't go away.

agree m also having same problems and same notifications...

Have Windows 7 and iTunes 10.7 but cannot get iTunes to launch. No error codes when click "open" and never does. Have uninstalled and re-installed several times.

Using Windows 7 and iTunes 10.7. Cannot launch iTunes - click "Open" and get no error but program won't open. Have uninstalled and reinstalled several times.

Can you check something for me please?
Restart your PC. after the PC restarts, bring up your Task manager, and go to the "Processes" tab. Click "Image name" to sort the processes alphabetically.
Now try to launch iTunes.
Does an itunes.exe process appear? If so, does it vanish after a second or so, or does it persist in the Processes tab (even though iTunes itself never shows up)?

ITunes won't open anymore. Have uninstalled and re-installed multiple times but installer window never pops up (Windows 7).

I have Windows 7 and my iTunes mysteriously stopped working. The loading sign (little blue circle next to the mouse) came up but nothing would happen. So I uninstalled it and re-installed it. Except it's the exact same problem. I click on the iTunes Setup shortcut and, again, nothing happens. I've uninstalled everything to do with Apple (Quicktime, Bonjour etc.) and have made sure that when I download the program again, it's set for Windows 7. I've also tried restoring my computer to a previous date, when iTunes did work, but it was the same thing! Nothing happens. IE works just fine and I'm able to download other things from the internet, all except for iTunes.

Are you re-installing Itunes 10.4? If you search around the discussion you'll see lots people are having issues with 10.4, including myself, probably best to go down to 10.3 until Apple fixes the issues with 10.4.

"Error 1 when trying to open and read datalog file from several subVi's

So, I've been coding up this model based controller and have hit a snag:
The program starts and opens a datalog file and passes the refnum to two loops.
At a regular time interval (every 2 minutes), one loop (that's iterating once per second) writes the current information to a datalog file.
Meanwhile, another loop (that's iterating continuously) checks to see if the file is big enough to support training of the model, if it is, then the training process begins. Once this happens a period of recent information is read from the file. Initially, this read would fail and return 0 data. However, this problem was fixed by passing in the data file path rather then the refnum and having the vi open,
read, and close the data file. With the path, the vi was able to read all the data. However, still in the same loop, another vi downstream tries to read the file and returns error code 1, and no data is read. I tried passing that vi the path and seeing if it made any difference to open, read and close the file. But even then the read failed (with error code 1).
I don't understand why it can read in one vi and not the other!
Does anyone know what is going on here? It seems that semaphores would probably solve the problem, but would prefer a simpler solution. Thank you very much.

Try passing the data to the continuous loop through a LV2-style global. That way you are only access the file in one place. But then that begs the question, if the data is passed internally, do you really need the file at all?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Itunes says it encounters a problem when trying to open. What do I do?

Whenever I try to open itunes it says that it has encountered a problem and needs to close. It gives me the options to send an error report, don't send, and debug. Itunes was working fine earlier but it froze and now I can't open it again. My operating system is windows XP (Yes an old computer). I tried uninstalling and reinstalling itunes several times and double checked that all atachments of itunes were deleted before restarting my computer to reinstall itunes both times. What's the issue? Thanks in advance.

Generate another of those error messages and click the "Click here" link in the error message box. What modname and modver are showing for the error? (Precise spelling please.)
If the error is a BEX and thus doesn't show an modname or modver, let us know what P1 through P9 items are showing for you instead.

My Itunes continues to have an error when trying to open and Windows closes the program. I have uninstalled and re-installed several times but continue to get the same error. HELP?

Similar Messages

Maybe you are looking for