My itunes does no recognise my ipad
my itunes does no recognise my ipad.
it appears like a camera.
Device Not Recognised
For PC
http://support.apple.com/kb/TS1538
Also, See Here
iPad not appearing in iTunes
From Here
http://www.apple.com/support/ipad/syncing/
Similar Messages
-
ITunes does not recognise my iPad and it keeps showing as iPhone
Do not know wha to do. I have tried several times to restart the computer as well as iPad. When connected to the computer iTunes it does ot recognise iPad though it is listed as one of he devices and used to work OK in the past. The iPad is shown like iPhone and it even shows all application etc as iPhone. Any advise?
Start here and go through the troubleshooting steps.
iOS: Device not recognized in iTunes for Windows - Support - Apple -
Itunes does not recognise ipad or iphone after window 8.1 patch May 2014
Last week my laptop did a patch update to windows 8.1 and now Itunes does not recognise my ipad or iphone when i plug them into the USB ports.
The devices do ask "to trust the computer" and Windows itself reconises the ipad and iphone and i can get to files on the apple products through windows but itunes doesnt see them and therefore doesnt sync therefore i cant download music onto my phone etc.
Ps i did uninstall itunes and reinstalled but this didnt work. Although after reading about other people with similar issues on past window updates I think I may need to uninstall all apple software .
I have an old Ipod 5G that works fine with Itunes.
Anybody with similar issues and a plan to get this sorted ?...... as i need music on my phone for holiday !!Hello andyv,
Thanks for using Apple Support Communities.
To troubleshoot this issue of your iPad not being recognized by iTunes on your Windows PC please follow the troubleshooting in the article below:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Take care,
Alex H. -
My iPhone 4 has not been working for the last 4months....I have just recently decided to give it another go and it seems to be working but I forgot my password. I would use iTunes to reset but my iTunes does not recognise my iPhone.... Is there anything that can be done
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software. -
HT1923 itunes does not recognise CD's uploaded , can't connect to server it states ,
itunes does not recognise CD's uploaded
can't connect to server it states
although PC is connected to the internet itunes can't find the connection
have an ipod nano
this is complicating things as I can't change what's on the ipod eitherTry a hard reset by pressing the Home button and Wake / Sleep button at the same time, keep them both pressed until the Apple Logo appears on the screen.
This does not lose any data on your iPad. -
We just added a new printer and bluetooth connection to our iMac. Now iTunes does not recognize our iPads as devices. Have already tried restarting everything. Any other suggestions?
You can try the steps recommended here: http://www.apple.com/support/ipad/assistant/itunes/
-
i changed from i iphone 5 back to a iphone 4.. now my itunes does not recognise that i have a iphone 4! how do i convert my last back up (on iphone 5) to my new iphone 4?
In your case you can only restore from a backup that has been created with the same iOS version. An iPhone 4 can only run 7.1.2, and, unless your iPhone 5 did not run the same version, you can't use a newer iOS backup of the 5 on the iPhone 4
-
Itunes does not recognise ipod touch
i've reinstalled the latest version of itunes plus ios 6 and followed the troubleshooting sections for Windows 7 PC but itunes does not recognise the ipod touch. the USB cable is ok (charges the ipod anyway) but when I run diagnostics it does not see an ipod.
iOS: Device not recognized in iTunes for Windows
Try another computer to help determine if you have an iPod or computer problem. -
Itunes does no longer find iPad 1?
itunes does no longer find iPad 1?
all versions updated: Snowleopard, Version 10.6.3, itunes Version 10.5.1, ipad 5.0.1
iPad1 is found as a camera in iphoto instead. What is to do??? ThanksThat was obviously not the problem (I've seen that other users had this kind of problem).
Radio button was in place and I could see all my radio stations - but none of them was playing.
Today I was trying again - and miracle: all streams work!
Since I didn't change my settings or version I guess that the problem was elsewhere (or within iTunes).
Unfortunately this will not help other people having the same problem - I don't know why it's solved now. -
I synced by ipod touch with itunes and it wiped all my music. Now itunes does not recognise my ipod. How can i fix this?
Here
iOS: Device not recognized in iTunes for Windows
or
iOS: Device not recognized in iTunes for Mac OS X
Does the iP{od work OK
Does it charge when connected? -
I have a 6th gen nano and windows 8.1. Itunes does not recognise my nano. I have tunes to download
B noir
Yes that is correct
Okay. Have you tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8 -
i've had my ipod for a few months now and it hasnt been a problem before as it has always imported CDs fine onto my ipod but recently whenever i insert a CD into the drive itunes does not recognise that i have put a CD in and it cant be the CDs that i put in as i have leant one of them to my friend and she said its worked fine on her itunes, when i insert the CD and go onto run CD diagnostics this comes up,
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
FUJITSU SIEMENS P5SD1-FM2
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: NVIDIA GeForce 6200SE TurboCache(TM)\GeForce 6200SE TurboCache(TM)
IDE\DiskST3160023AS____________________________3.00___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomHL-DT-STDVDRRW_GWA-4164B_______________1.03___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: HL-DT-ST DVDRRW GWA-4164B, Rev 1.03
Drive is empty.
The last failed audio CD burn had error code -128(0xffffff80). It happened on drive D: HL-DT-ST DVDRRW GWA-4164B on -128(0xffffff80) media at speed 0X.
i dont even understand what this means, please help!!!!!!!!!!!! thanx xxxxWell the report just tells basics of your setup and errors going on in short. Error -128 means either you or iTUnes cancelled the burn before it even started.
Your issue tho is you have no lower filter. you should have 2, and upper filter and a lower filter. Now Im not that good with the filter thing just yet, but I think if you reinstall itunes it will install the lower filter you need.
You will want to remove itunes AND quicktime in the control panel>Add/remove. Dis able any antivirus/security programs so they do not interferr with iTUnes and then download and install the latest iTunes from www.apple.com -
Hi, i have received an iphone 4s from japan! whwn i connect it to my pc, itunes does not recognise it. what can i do?
For this issue you might try a couple things.
First, try to restart the Apple Mobile Device service by clicking Start and searching for Services. Stop the service, then restart the service.
If that doesn't work, you can remove and reinstall iTunes.
http://support.apple.com/kb/HT1923
This article will help with that process. Follow it exactly. -
Itunes does not recognise the ipod after update to itunes 8.2.0.23
Hi, Now find, after putting new songs in my play list, that when I plug in ipod to update songs on ipod itunes does not recognise the ipod.
The version of iTunes I updated to was 8.2.0.23 - everything worked fine until then. I see there is a newer version 8.2.1 now available - do you think by installing this the "unable to recognise" problem would be fixed???
Thanks for your thoughts!I have a similar problem with the iPhone. Tried everything you can think of and then some. There is apparently some devastating bug 7.6 introduced into normal USB device recognition. I've been able to force the phone into recovery mode; the boot recovery USB driver does still work. Restoring the phone every time I need to sync is both scary and time-consuming.
-
ITunes won't recognise my iPad since the latest update.
iTunes won't recognise my iPad since the latest update. I have tried the solution on http://support.apple.com/kb/TS1538, twice over but with no result.
I have repaired each of the iTunes elements and restarted both the computer and the iPad several times.
I have Windows Vista Ultimate 64-bit operating system.
Processor: Intel (R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz 2.40 GHz
iOS 8.0.2 iPad 64GBHi Skydiver119
Thanks for your reply. That was what the solution I found on that link I posted, except it said to include the 'Bonjour' too. I've uninstalled everything, downloaded the latest iTunes, reinstalled and restarted the computer twice, but it still won't recognise the iPad. I've also rebooted the iPad each time.
Any other ideas on what might work?
Thanks in advance
Maybe you are looking for
-
New Ipod Mini (2nd Generation) Unrecognized by Windows XP Pro
I'm beside myself with frustration after two days of trying to get this to work. Three XP Pro computers tell me "USB Device not recognized - One of the USB devices attached to this computer has malfunctioned - Windows does not recognize it. For assis
-
Payment Format Program Output in XML
Hi All, I am trying to create a new payment format and should display the output in XML. For this I created a PL/SQL procedure , created my tags and displayed the out put in XML format. Using this I created one RTF template and did the data def and d
-
How do i get the database name in reports. we can get this in form by get_application_property, do we have anything like that in reports thanks
-
I have made an application in swings i have stored the class files in a system and call that class files by a batfile shortcut in two diff. pcs .and i am tring to get an value of a Jtextarea in an event When I tried to run this application at the sam
-
Call Centre???
Hi, I have been asked to suggest an SAP solution to this: Log calls/requests to HR from employee's (e.g. leavers, absence, Leave, transfers....normal HR processes). Basically, the requirement is a call centre and the SAP Solution would be CRM but we