My itunes does not get the names of all tracks which i import.

When i import a cd into itunes, it does not get any track names. Why is this.
Also, itunes does not connect to the music store. It tells me that i should check my connection etc etc. Are these problems related, and what can i do to fix it?

Let me guess, did you just install/upgrade iTunes?
If so, then it's surely your security software (firewall, web accelerator, privacy filters, etc) that is blocking iTunes.
The iTunes "upgrade" is actually an uninstall, then total new install, of iTunes and QuickTime. Many security packages such as Norton, Zone Alarm, Google Web accelerator, McAfee, PCillin (...the list is long) see this new iTunes install as a malicious threat, and block out the previous settings without telling you.
Go to your security software vendor's website and see if they have directions for allowing iTunes & QT back in the list of programs allowed to access the internet.

Similar Messages

  • ITunes does not show the names of my songs

    I Was going to download a CD I have & when I put it in all iTunes would show was Track 1, Track 2, and so on. How do I change the names of the songs or get iTunes to recognize the song? Thanks for your help!

    Insert the CD and select it in iTunes.
    Go to menu Advanced -> Get CD track names.

  • When i press sync in iTunes my iPhone 4s does not get the my music how do i fix this

    when i press sync in iTunes my iPhone 4s does not get the my music how do i fix this

    no, and i have spent my entire spring break with a dead iphone 4s, no access to my iphone mail accounts, can't get into my text service app, and can't get into notes. oh yeah, all of my music is gone. thanks a bunch for this wonderful upgrade.
    i am never upgrading again until i am sure all the bugs are out. this is a waste of my time and what's the use of having a cellphone if it only stays charged for two hours?
    one of the apple forums said that iox is "expanvie" and gave us tips on how to lengthen battery life. i was already doing all that stuff. so it seemed to me that apple was just taking the stand that  ios is just more "expansive." this is lipservice hogwash. if that is the case, then we need to get new phones with batteries strong enough to accommodate running these power apps and updates.
    my iphone makes a **** good coaster though. right now i am just ready to start sending smoke signals!

  • I contiue to get the error message registry settings used by itunes drivers for importing and burning CD's and DVD's are missing.  Please reinstall itunes.  Reinstalling itunes does not fix the problems

    I continue to get the error message registry settings used by itunes drivers for importing and burning CD's and DVD's are missing.  Please reinstall itunes.  Reinstalling itunes does not fix the problems

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • My iphone 5 is frozen on the screen that shows a cable and itunes symbol.  I can not get the phone to enter DFU mode and itunes does not recognize the phone when plugged in to itunes.  The phone was mid update when it was disrupted....

    I plugged my iphone in to do an update and it was mid way through the update when the phone was accidentally disconnected.  Now the phone is stuck on the screen that shows a cable and the iTunes image suggesting the phone needs to be plugged in to iTunes.  I have plugged it in, powered on and off, attempted to enter DFU mode numerous times all with no success.  ITunes does not recognize the phone and I continue to only receive the screen saying I need to plug in to iTunes..  Please help!

    Hold Sleep Button with Home Button toghether until it restarts Always it takes 8 to 15 seconds, after it restarts leave the sleep button and remember do not leave the home button it automaticlly switches to DFU mode.

  • The name on the security certificate is invalid or does not match the name of the site

    Hi Guys,
    Every time when we login to SAP Business One, we are getting two identical security Alerts, that we needs to click "Yes" twice.
    Text of error: “The name on the security certificate is invalid or does not match the name of the site”
    We tried to install certificate, but it is not solved this certificate issue and the alert still pops up on login.
    I guess, something wrong with dashboard settings, but don't really know what exact and how to fix it.
    Thanks,
    Sergey

    Hi,
    Please check SAP note:
    1810486 - Dashboard Certificate Sercurity Alert appears on every
    logon to Business One
    Thanks & Regards,
    Nagarajan

  • The name on the security certificate is invalid or does not match the name of the site" : IE

    Hi All,
    All clients are getting “the name on the security certificate is invalid or does not match the name of the
    site” when its reboot and try to access website.
    I don’t have idea about certificate authority. Can anyone help on how I start troubleshooting this.
    Is there any group policy setting which resolve this issue.
    Please suggest what parameter I have to check. 

    > All clients are getting “the name on the security certificate is invalid
    > or does not match the name of the site” when its reboot and try to access website.
    "View Certificate" should tell you.
    Greetings/Grüße,
    Martin
    Mal ein
    gutes Buch über GPOs lesen?
    Good or bad GPOs? - my blog…
    And if IT bothers me -
    coke bottle design refreshment (-:

  • Exchange 2013 w/Outlook 2013 "The name of the security certificate is invalid or does not match the name of the site"

    I've completed an upgrade from Exchange 2003 to Exchange 2013 and I have one last SSL message that I can't get rid of.  I've installed a 3rd party cert that is working great for webmail and cell phone access but for some reason the Outlook 2010/2013
    clients get prompted for a security warning.  I just implemented the SSL cert yesterday and I've noticed that new installs of Outlook seem to work just fine.  My Outlook 2013 client doesn't prompt me with the message but I have other users who are
    still getting the "The name of the security certificate is invalid or does not match the name of the site" error.  The domain on the cert error show up as server.mydomain.local.  I've gone through all the virtual directories and pointed
    all of my internal and external URL's to https://mail.mydomain.com.   This made one of the two warnings go away but not the second.  I've dug around on google and gone through everything I could find here and as far as I can tell my internal
    and external url's are configured properly and I can't figure out where this error is originating from.  Any ideas on where I should look outside of the virtual directories? 
    I'm including a good link I found that contains all of the virtual directories I updated.  I've checked them through both CLI and GUI and everything looks good.
    http://www.mustbegeek.com/configure-external-and-internal-url-in-exchange-2013/
    http://jaworskiblog.com/2013/04/13/setting-internal-and-external-urls-in-exchange-2013/

    Hi,
    When the Outlook connect to Exchange 2013/Exchange 2010, the client would connect to Autodiscover service to retrieve Exchange service automatically from server side. This feature is not available in Exchange 2003 Outlook profile.
    Generally, when mailbox is moved to Exchange 2013, the Outlook would connect to server to automatically update these information. It needs time to detect and update the changes in server side. I suggest we can do the following setting For autodiscover service:
    Get-ClientAccessServer | Set-ClientAccessServer –AutodiscoverServiceInternalUri https://mail.mydomain.com/autodiscover/autodiscover.xml
    Please restart IIS service by running IISReset in a Command Prompt window after all configuraions.
    Regards,
    Winnie Liang
    TechNet Community Support

  • The name of the security certificate is invalid or does not match the name of the site error?

    I am looking for some help folks. We are in a Outlook 2007/Exchange2010/Windows2008R2 environment.
    When users open Outlook off the network, and occasionally on the network, they get the error
    The name of the security certificate is invalid or does not match the name of the site error
    The CAS hostname is HRECAS.XXX.ORG. The URL that is listed on the SSL certificate (issued by VeriSign) is WEB.XXX.ORG. WEB.XXX.ORG is what users use to get to OWA and such.
    When I use testexchangeconnectivity.com, under certificate name validation I see an error that reads:
    Host name autodiscover.xxx.org doesn't match any name found on the server certificate CN=web.xxx.org.
    Does this mean somehow we have to add autodiscover.xxx.org on the certificate?
    I tried to add AutoDiscoverExternalUri using
    http://support.microsoft.com/?kbid=940726 &
    http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/2d0c0f5f-e4ec-4f33-a37d-b94fd7a2319f on the CAS server.
    Set-ClientAccessServer -identity HRECAS -AutodiscoverServiceExternalUri
     https://autodiscover.xxx.org/Autodiscover/Autodiscover.xml 
    I get an error that says
    "a positional parameter cannot be found that accepts argument '-AutoDiscoverExternalUri'.
    Can someone point to me what I am doing wrong with the command and whether I should be concerning myself with adding that line? By the way the
    InternalUrl information is already configured on the system. Also should I edit the certificate to add autodiscover.xxx.org?
    Thank in advance for your support.
    TD
    TD

    Hi Tapera,
    Thanks for the question.
    SRV record is a good idea. You can set the SRV to
    https://web.abc.com/autodiscover/autodiscover.xml but you must make sure the
    url can be resolved from External clients.
    In addition, there is still a issue. It is hard coded that Outlook will find the autodiscover by the orders below:
    1. Access autodiscover via SCP in AD.
    https://web.abc.com/autodiscover/autodiscover.xml
    2. If SCP access fails, it will try:
    https://abc.com/autodiscover/autodiscover.xml
    3. Then
    https://autodiscover.abc.com/autodiscover/autodiscover.xml
    4. Local XML file
    5. SRV record
    As you can see, Outlook will try SRV record at last. Therefore, it will still try to access
    https://autodiscover.abc.com/autodiscover/autodiscover.xml each time you run Outlook. Then the certificate warning will still persists.
    I have a workaround solution. You can do a local policy to disable the autodiscover to access the
    https://autodiscover.abc.ocom/autodiscover/autodiscover.xml by:
    1.   
    On the Outlook client machine, open regedit and add the following key:
    HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Outlook\Autodiscover
             "ExcludeHttpsAutodiscoverDomain"
             "ExcludeHttpsRootDomain"
    2.   
    Then set the value to “1” on the above two keys.
    Thanks,
    Simon  

  • I have an I phone 4s and I have many contacts in my phone.  However, whne my phone rings or I receive a text, the phone does not show the name of the contact person only the phone number.  I have checked every setting I can think of ?

    I have an I phone 4s and I have many contacts in my phone.  However, when my phone rings or I receive a message.  The phone does not show the name of the caller.  It only shows the phone number that is calling.  I am sure this is a setting problem, but I have checked every setting I can think of.  Any suggestions??

    If you are a Verizon user try this:
    Open the phone and dial *228. This is a Verizon over-the-air programming number.
    When the system answer press 1 for "Program or activate your phone"
    Wait for the call to disconnect. You should get a prompt stating "Settings updated."
    Double tap the Home button to bring up the recently used apps list at the bottom.  Locate the Phone, Message, and Contacts apps, swiping if necessary, and press and hold until they jiggle then press the red minus sign to stop them.
    Wait a 3-5 minutes.
    Try your phone again and see if it's fixed.

  • Outlook Security Alert - "the name on the security certificate is invalid or does not match the name of the site"

    Due to our company changing names, we recently moved to a new domain. All users were at first getting a certificate error when opening Outlook "the name on the security certificate is invalid or does not match the name of the site." After our network
    admin made some changes, nobody receives this error anymore except one user. The URL at the top of the security alert is the old domain, mail.olddomain.com. I checked the users Exchange Proxy Settings in Outlook, everything is showing the URL's of the new
    domain so I'm not sure where this is coming from. I'm assuming it has to be something on her local machine since she is the only one who still gets the error.
    Thanks in advance for any help.
    Exchange server 2008
    Outlook 2010

    Hi,
    Please follow all above suggestions to confirm whether the issue happens in OWA. And run Test E-mail AutoConfiguration in Outlook to check whether there is any URL settings using the old domain.
    If the issue doesn’t happen in OWA and your URL configurations are all same as others and set correctly, please create a new Outlook profile to have a try.
    Thanks,
    Winnie Liang
    TechNet Community Support

  • There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site "Mailserver"

    Good day Guys
    First of all I am not an Exchange Expert, and I might be asking a very stupid question, but please bare with me. :) 
    While I was on leave our Mail server fell over and The company got a Specialist to help out for the time being.
    We where\are on Microsoft Exchange 2007 , which Fell over, and the specialist was able to recover as much data as he could.
    They then installed Exchange 2013 and tried to migrate everything from 2007 to 2013 and not everything migrated over.
    But the problem is, Outlook Anywhere was enable on 2007 and worked a 100% (before the disaster)
    With Exchange 2013 I get the following error message when trying to connect With Outlook 2013, using an external connection:
    "There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site "Mailserver"
    Outlook is unable to connect to the Proxy server. (Error Code 0)"
    Has anyone had the Similar when migrating over from 2007 to 2013 or is this an Issue on IIS and nothing to do with Exchange migration?
    Your assistance will be greatly appreciated.

    Hi,
    Firstly, I would suggest we use Exchange 2013 FE as the Outlook Anywhere proxy server.
    For the certificate issue, it mostly occurs because the host name that Outlook are trying to access does not match the certificate SAN. Please check with this point. If they do not match, you
    can change the host name by referring to the following article:
    https://support.microsoft.com/kb/940726/en-us?wa=wsignin1.0
    Thanks,
    Simon Wu
    TechNet Community Support

  • Wiped our old iPad 1 clean, now can't install iOS from iTunes.  iTunes does not "see" the devise.  Tried uninstalling and installing iTunes on laptop.  Also bought new USB cable.  The iPad is charging, but that's all it does.

    Wiped our old iPad 1 clean, now can't install iOS from iTunes using laptop PC (W Vista).  iTunes does not "see" the device.  Tried uninstalling and installing iTunes on laptop.  Also bought new USB cable.  The iPad is charging, but that's all it does.  Just want to get it operating again for browsing and e-reading.

    OK.  You merely erased the content and settings.  The IOS is still there.
    If it has NEVER been jailbroke, here are some standard repair procedures.  From what you've already stated, my guess is that you'll end up with Recovery Mode described in the last paragraph.
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

  • TS4062 hi can somebody help me... itunes does not accept the iphone 4s but i already have the version 64 bit to work with windows 7 64 bit,  the computer recognizes the phone but itunes sais i need 64 bit itunes.... please is there something im missing...

    hi can somebody help me... itunes does not accept the iphone 4s but i already have the version 64 bit to work with windows 7 64 bit,  the computer recognizes the phone but itunes sais i need 64 bit itunes. please is there something im missing... thanks

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • Hello! I have installed Photoshop on PC WIN 7 64bit. When I store first time a Photoshop docuument, it works fine - after re-opening and doing changes I trying again to store it - it does not work anymore! First it does not accept the name (message "It ca

    Hello! I have installed Photoshop on PC WIN 7 64bit. When I store first time a Photoshop docuument, it works fine - after re-opening and doing changes I trying again to store it - it does not work anymore! First it does not accept the name (message "It can not be stored because the nam is invalid" With 2. trial it tells me that the data is blocked and I don't have the rights - and I should chenge them. But I am working as the Admin on my PC - and each trial to change the rights of the data is as well not possible because of missing rights - even I am Admin! I must always store the data with a new name, then it works, but I also cannot remove the old datas or shift them into the waste paper - because of no rights! -- sorry for not perfect english, I am German native speaker! Tahnks a lot for help!

    Hi,
    I am using a Nvidia 4200M adapter in my Laptop, Driver 266.96, Direct X 11
    In my desktop I am using an ATI XFX 6950, latest revision drivers (I am not at home right now so I cant get that info).
    The issue I did describe above, but it was a long explanation.
    In some flash games the game files load initially and get as far as the "click to start" button. Then the flash area usually goes either all white or all black (usually depending on the falsh game default background color) and then it stays that color. Cant see anything after hitting start (usually most games have an intro video or animation before the game starts, but I cant see any of it.
    For the very few games that do start, the flash game or application does not seem to work correctly in that when the rare game starts, it wont save any game files or save files to the pc and so if I exit the game (navigate away to another page or close browser) and then later come back, even though I click the option to save games (and ensure that the flash application slider shows it can save files and lots of space) it does not save and I have to start from the beginning all the time.
    More explanation I gave above.

Maybe you are looking for