My iTunes library is too large for my iPod classic--can I create a separate library so that I can split the current library and sync the distinct libraries onto separate iPods?
My iTunes library is too large for my iPod classic--can I create a separate library so that I can split the current library and sync the distinct libraries onto separate iPods?
- If the Gmail accounts are IMAP one then if the library is erased and then you use the account old email will be redownload
- Easing the library on the MacBook does not effect what is on the iMac. On the other hand if you deleted the messages in the Mail app on the MacBook then they will deleted from all devices.
-See the middle of the following. It would seem to help in your situation
http://www.howtogeek.com/209517/how-to-stop-your-macs-mail-app-from-wasting-giga bytes-of-space/
Similar Messages
-
I am trying to restore a backup onto my iphone from itunes on a pc windows 8 but it asked me for a backup password which I cant remember, is there anyway that I can reset the password and not lose my backup? Any help is very appreciated
Try entering the password on your iPhone
-
Do I still need to have enough space on my iPad for my whole music library? Seems like I must be missing something...why would I want to be limited by the memory space on my mobile device? Is there another way to share audio files between my computer and my iPad other than iTunes?
It depends on whihch IPad you purchased. The 16GB, the 32GB, or the 64GB for storage.
Tap Settings > General > About. You'll see Capacity in the list.
How Mac OS X and iOS report storage capacity
You get 5GB of free storage space with iCloud but you can purchase more if necessary.
Apple - iCloud - Learn how to set up iCloud on all your devices
If you setup an iCloud account, it won't be necessary to sync your iPad media with iTunes. Everything is synced via your Wi-Fi network with iCloud.
If you do not want to use iCloud for storage and syncing, iTunes is the only software you can use to sync iTunes media with an iOS device. -
I recently updated to iTunes 11 on my Windows PC. Since the update, each time I open iTunes its window is too large for my screen. Resizing it is a pain, because I have to change my screen resolution. And then when I restart iTunes, it has reverted back to being too large. Please help!
Having the same issue here....a quick fix is to just minimize the window, and immediately maximize it. It will now fit the screen. Trouble is, after you close it, you'll have to do it again when you re-start itunes. The good news is it takes all of about 2 seconds. Apple should fix this. Should.
-
ERROR : OpenDoc CR to PDF - File is too large for attachment.
We are getting the following error in 3.1 using an OpenDoc call when we call a large Crystal Report to PDF format...
Error : 52cf6f8f4bbb6d3.pdf File is too large for attachment.
It runs OK from BOE when given parameters that returned 44 pages. (PDF = 139 KB)
We get the error on a parameter-set that returns 174 pages when run via CR Desktop or as a SCHEDULED Instance. (PDF = 446 KB).
Client application can't use the SDKs to SCHEDULE Instances - only configured for OpenDoc calls.....
The BOE server is running on SOLARIS - and it's is a 2 Server CMS-Cluster.
The problem is SPORADIC, so I am thinking the issue is related to a specific setting on one of the servers.
Any thoughts on where to start looking...?Problem is _not _with the number of Rows returned - it is an issue with the size of the PDF file that it is trying to move.
Found a possible WINDOWS solution on BOB - need to find if there is an equivalent for SOLARIS...
Check the dsws.properties on web server D:\Program Files\Business Objects\Tomcat55\webapps\dswsbobje\WEB-INF\classes
See if you can change any parameter to remove size limitation.
#Security measure to limit total upload file size
maximumUploadFileSize = 10485760 -
Error Differance is too large for Customer clearning
Hi,
When I am trying to clear the customer f-32 i am getting the error as "(F5 263) The difference is too large for clearing".
Excise invoice is created in USD . when i clear the payment in indian currency the erors occurs.
Request you to please help me in resolving the same.
Thanks & Regards,
NeerajHi Vivek,
There are 2533 documents with same assignment and I am trying to clear this documents.
Document currencies are in USD, HKD, GBP, JPY and there is balance in all these currencies.
Local currency is MOP total of which is zero for all this documents.
On Initial screen I am giving MOP which is local currency.
Can you explain me how to clear this through F-03, is there any other way to clear this? -
Getting error ORA-01401: inserted value too large for column
Hello ,
I have Configured the scenario IDOC to JDBC .In the SXMB_MONI am getting the succes message .But in the Adapter Monitor am getting the error message as
ORA-01401: inserted value too large for column and the entries also not inserted in to the table.I hope this is because of the date format only.In Oracle table date field has defined in the format of '01-JAN-2005'.I am also passing the date field in the same format only for INVOICE_DATE and INVOICE_DUE_DATE.Please see the target structure .
<?xml version="1.0" encoding="UTF-8" ?>
- <ns:INVOICE_INFO_MT xmlns:ns="http://sap.com/xi/InvoiceIDoc_Test">
- <Statement>
- <INVOICE_INFO action="INSERT">
- <access>
<INVOICE_ID>0090000303</INVOICE_ID>
<INVOICE_DATE>01-Dec-2005</INVOICE_DATE>
<INVOICE_DUE_DATE>01-Jan-2005</INVOICE_DUE_DATE>
<ORDER_ID>0000000000011852</ORDER_ID>
<ORDER_LINE_NUM>000010</ORDER_LINE_NUM>
<INVOICE_TYPE>LR</INVOICE_TYPE>
<INVOICE_ORGINAL_AMT>10000</INVOICE_ORGINAL_AMT>
<INVOICE_OUTSTANDING_AMT>1000</INVOICE_OUTSTANDING_AMT>
<INTERNAL_USE_FLG>X</INTERNAL_USE_FLG>
<BILLTO>0004000012</BILLTO>
<SHIPTO>40000006</SHIPTO>
<STATUS_ID>O</STATUS_ID>
</access>
</INVOICE_INFO>
</Statement>
</ns:INVOICE_INFO_MT>
Please let me know what are all the possible solution to fix the error and to insert the entries in the table.
Thanks in Advance!Hi muthu,
// inserted value too large for column
When your oracle insertion throws this error, it implies that some value that you are trying to insert into the table is larger than the allocated size.
Just check the format of your table and the respective size of each field on your oracle cleint by using the command,
DESCRIBE <tablename> .
and then verify it with the input. I dont think the problem is with the DATE format because if it is not a valid date format, you would have got on error like
String Literal does not match type
Hope this helps,
Regards,
Bhavesh -
Ora-14036 error partition bound too large for column
Hi All,
I have a partitioned table on balance_period .. format YYYYMM .
I am trying to split the PMAX partition but get the errors :-
> ALTER TABLE ACT_MD_FOREIGNEXCHANGE SPLIT PARTITION ACT_MD_FOREIGNEX_PMAX AT (TO_DATE ('20081201', 'YYYYMMDD))
2 INTO (PARTITION ACT_MD_FOREIGNEX_200812, PARTITION ACT_MD_FOREIGNEX_PMAX);
ALTER TABLE ACT_MD_FOREIGNEXCHANGE SPLIT PARTITION ACT_MD_FOREIGNEX_PMAX AT (TO_DATE ('20081201', 'YYYYMMDD))
ERROR at line 1:
ORA-01756: quoted string not properly terminated
> ALTER TABLE ACT_MD_FOREIGNEXCHANGE SPLIT PARTITION ACT_MD_FOREIGNEX_PMAX AT (TO_DATE ('20081201', 'YYYYMMDD'))
2 INTO (PARTITION ACT_MD_FOREIGNEX_200812, PARTITION ACT_MD_FOREIGNEX_PMAX);
ALTER TABLE ACT_MD_FOREIGNEXCHANGE SPLIT PARTITION ACT_MD_FOREIGNEX_PMAX AT (TO_DATE ('20081201', 'YYYYMMDD'))
ERROR at line 1:
ORA-14036: partition bound value too large for column
What is the correct format for the AT part of the statement please ?I believe that the partition definitions for the other partitions are not the same as the value you gave in your split statement. Check the definitions for the existing partitions.
14036, 00000, "partition bound value too large for column"
// *Cause: Length of partition bound value is longer than that of the
// corresponding partitioning column.
// *Action: Ensure that lengths of high bound values do not exceed those of
// corresponding partitioning columnsJohn -
How can I put my recently purchased iTunes movies onto my thumb drive and WD my passport external hard drive.My Mac is saying that can't be copied because it is too large for volumes format
[file] is too large for the volumes format
That is usually an indication that the Volume was never Erased or Partitioned for GUID partition table and Mac OS, and is still in a Windows format.
Mac OS X Extended (journaled) has no such file-size limitations -
My iPhoto Library (version 8.1.2) is 280GB (greater than 50% of my 500GB total storage memory on my iMac. It was too large for me to drag it to a new hard drive so the Apple geniuses did it for me. However they did not delete the Library from my iMac (that's my responsibility). I dragged it to Trash and when it started to move I clicked over to the new hard drive to confirm it had indeed been copied. I became nervous when I didn't see among the few files on this otherwise empty new hard drive anything that resembled a 280GB Library so I cancelled the migration to trash.
How can I be sure that my iphoto has been copied and that all my "metadata" survived in tact?the new backup drive
I thought the new drive would be your data drive to host the iPhoto library. Do you also use it for TimeMachine backups?
I am unable to search either in email as well as Finder. I AM able to search within iPhoto though, thankfully
Spotlight may still be busy rebuildig its index.
You could try to rebuild the Spotlight Index, if you do see no progress:
Spotlight: How to re-index folders or volumes
I hope, other frequent posters will drop in. I have not used iPhoto 8.x in long time. -
Every time i open Itunes it starts in a window that is too large for the screen (despite me setting "start maximised" in the launch options). Then hitting the "maximise" button expands the window slightly pushing all the buttons and edge of the frame out of the screen and behind the taskbar at the bottom. I have to move the window to a place where i can resize it smaller than the screen then and only then does maximising the window fit it properly to the screen.
Okay, I just opened up Itunes this evening and it's not working again! Sheeshy Peetz!
HOWEVER, this time I followed some different steps and got it working.
(1) Uninstall Quicktime
(2) Uninstall Itunes
(3) Re-download Both
(4) Install Quicktime First! (Read #6 below first though)
(5) Install Itunes Next! (Read #6 below first though)
(6) Here is the CAVEAT for me: I have an SSD as my C:\Drive, which is where I originally installed both of them. So this time, I installed both Quicktime and Itunes to a Non-SSD drive, which was one of my SATA Drives.
(7) Start Itunes and Test your Movies now. For me I was able to play them finally. Who knows how long this will last lol.
Maybe this work for someone. -
I tried to download an app for the iPad and was told the file was too large for the iPad; so I tried to download it on the MacBook but it never showed up; any suggestions? PS, I got the receipt from iTunes store so it was paid for
FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Cheers, Tom -
When I attempt to download the lastest version of the iphone 4 OS update or the itunes one for the desktop, the file is too large for my internet carrier. It will allow only a 400 MB download versus the download size of 583 MB. Suggestions?
You can download on your work computer, then place the file on your desktop of your home computer, if you want. Then:
Launch iTunes
Option+Click (Mac OS X) or Shift+Click (Windows) the Update button
Select the IPSW update file you just placed on your desktop
Let iTunes update your hardware to the latest version
The .ipsw file is located here:
Windows XP: \Documents and Settings\username\Application Data\Apple Computer\iTunes\iPhone Software Updates
Windows Vista & Windows 7: \Users\username\AppData\Roaming\Apple Computer\iTunes\iPhone Software Updates
You will have to turn on "Show All Hidden Files & Folders" to see it. -
Question: I have upgraded my windows vista to windows 7, I have all of my itunes music stored onto an external due to the size of content, so in vista all of my music in itunes had a path to F (external library). But now I have upgrade to windows 7, I cannot get itunes to recognise my library from my external. I have tried to connect external and open itunes with shift key down with both suggestions but to no avail. please help, all I want is to keep my library on external not on hard drive. I have also gone to preferences/advanced and made sure the external drive is chosen. This seems so complicated and I thought it would have been easy...
At a guess you followed the process in HT1364 - iTunes for Windows: Moving your iTunes Media folder which would have moved the media folder to a new path of your choice. This process leaves the library database files back in the original location of <User's Music>\iTunes. Often people assume that all they need is now on the external drive and wipe the internal drive, or discard their old computer, before backing up the all important iTunes folder. If you have a backup of your user's profile folder from before the upgrade the iTunes library folder should be in there somewhere. Restore it to <User's Music> and your original library should pop back into existence. The external drive would need to have the same drive letter that it had previously.
A more effective way to relocate the library is to move the entire iTunes folder to the external drive, then hold down shift when starting iTunes and keep holding until asked to choose or create a library. You would then choose the file iTunes Library.itl in the iTunes folder on the external drive. If this is the way you moved the library before then that is how you should now reconnect to it. Changing the media folder in preferences doesn't change which .itl database file is opened, nor does double-clicking on an .itl file directly.
If you no longer have the original .itl file then you will have to build a new library and import the media to it. If you need to do this I would recommend you create a new library at F:\iTunes, then move your existing media folders inside F:\iTunes\iTunes Media before importing. This will avoid the creation of duplicates and make sure the library is in the correct shape going forwards.
If you have an iPod or iOS device my scripts ImportDevicePlaylists and SyncStats may well let you recover ratings, play counts & playlists from the device.
When you've fixed up your libray you should consider getting a second external drive to backup to.
tt2 -
I recently purchased a movie at 1080p and when I went to view it, I received a message stating 1080p is too large for playback. How can I re-download the movie at 720?
Not sure what happend there. But ATV only streams, no HD so if you leave it too long, the whole download gets lost.
Check with iTS.
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html
Maybe you are looking for
-
Few questions on EB-SUS scenario?
Dear Experts, I have few questions on EB-SUS scenario which you may help with your expertise. It will be helpful for those who are new to scenario? 1. EB (enterpise Buyer or SRM) -SUS scenario is used for requesting external staff? can it be used for
-
It will not connect but my other apple devices can connect and the wifi works very well. I have moved houses to my house wifi isnt the same as the old one. Also, i have to type in the password every time even if i click autosave. Sometimes it also sa
-
Completely new to Soundtrack Pro - need help for school project
I've never used Soundtrack Pro before, but I need to record and modify some dialogue for a project for one of my classes, and I think that's the only audio program we have on the computers in the lab I'm using. Can I use Soundtrack Pro to record myse
-
Iphoto does not consistently use filename as title
I am importing photos from a Finder folder into iphoto (09). For some photos, the program automatically uses the file name as title; for other photos it does not assign any title. I can't make out any pattern. Since I gave the files names that have m
-
Old Collection replaced my new Collection becavse of a linked IMG #
I created an edited photo collection. A few weeks later I wanted to retrieve that collection so I covld bvrn it onto a cd. I vsed an IMG # from the DMG file to call vp the edited collection. I vse my sd cards over and over again, so sometimes seve