My itunes on my imac cannot stream my music by my airport express. It says unknown error (-15006). My ipad it is no problem.

My itunes on my imac cannot stream my music by my airport express. It says unknown error (-15006). With my ipad it is no problem.
My imac has been working before.

Hello JBrans!
Did you get help for this problem. Today I got the same problem. Now I don´t know what I can do anything. I did reset AirPort Express. New konfiguration. Nothing. Thank for help!
Kind regards
Falk H.

Similar Messages

  • HT1420 Please help.... cannot get into the ITUNES account. It says unknown error has occured. Is there a problem with ITunes?

    Please help.... cannot get into the ITUNES account. It says unknown error has occured. Is there a problem with ITunes?

    Same thing happened with my iPhone 4S - no one is any help.  Thanks Apple for such a crappy update!  I've called Apple, they say the SIM card needs replacing, I go to my service provider they tell me nothing wrong with the SIM card - provider tells me I now need a new phone.  Sheesh!  If someone has a solution to this it would be greatly appreciated.

  • Streaming music over old airport express frequently hangs

    Ever since i upgraded to IT8 i keep having frequent interruption when i stream my music to my airport express whether they are tracks in my library or internet radio station.
    I have never had this problem prior to upgrading. has anyone encountered or witnessed this annoying behavior ?

    Lots of people are seeing it unfortunately.
    http://discussions.apple.com/thread.jspa?threadID=1715679&tstart=0
    http://discussions.apple.com/thread.jspa?threadID=1704022&tstart=0
    http://discussions.apple.com/thread.jspa?threadID=1702916&tstart=0

  • You badgered me into installing the latest Itunes and now I cannot find my music nor my podcasts. Where the **** are they?

    I was badgered into installing the latest Itunes and now I cannot find my music nor my podcasts. Where the **** did they go and how can I get them back? You folks at Apple sure make it hard to like you or want to use your products.

    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't normally lose a thing or need to do any further housekeeping.  Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
    In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be renamed as iTunes Library.itl to restore the library to a recent state.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
    Would you mind telling me which anti-virus package you use? It may be that it is disturbing iTunes when it tries to write out the fresh database, as it does after almost any activity with your library. I'm noticing more of this type of problem than usual and trying to see if there is any pattern. It may help to prevent a repeat of the problem if you look at the advanced options for your AV package and see if you can find a way to exclude the main iTunes library folder (and subfolders if possible) from any real-time scanning process.
    tt2

  • Installed latest version of iTunes, now I cannot play music through my Airport express. I'm seeing the message "An error occurred while connecting to the AirPlay device "living room". The network connection failed.

    Installed latest version of iTunes, now I cannot play music through my Airport Express. I'm seeing the message "An error occurred while connecting to the AirPlay device "living room". The network connection failed..."Living room" is what I named the is what I named The AirPlay function of the Aport Express. Thanks!

    I have the same problem - did you solve it?

  • Cannot stream Netflix on TV with airport at the same time.

    I have called every 800 number with an Indian accent available. I have called Comcast, Samsung, and my local Apple dealer. They all say i need to call each other's support network. No help. They just read from a computer a response that I have by now memorized. I'm about to send my new Samsung 2500 back to Amazon.
    Here's the deal: I have a Comcast modem for internet and phone. I have a Netgear router. I have a Samsung Blu-ray 2500 DVD player that streams NetFlix and I have Airport Express. After hours of fidgeting, I have finally figured out that I can either stream NetFlix or get internet for my MacBook but not both. Period. So, I can run my Airport wireless or my Netflix on TV but not both. I am somewhat techno impaired but in some of the discussions someone mentioned that you cannot have two IP addresses for one cable OR you cannot have one IP address and run NetFlix and surf the web on your laptop. The second seems absurd. In the very fine print, Samsung says that some IP's will not let you stream NetFlix. Does anyone know if that is true with Comcast? Comcast themselves didn't know (honest! - at least not the boiler plate email I got back said they didn't). It honestly starts to get funny when I go through all the set up online with my Samsung and then they give me a password to start streaming movies. BUT, to do this, I must disconnect my Samsung to get online with my laptop to plug in the password. By the time I do that, the password time has expired! LOL!! Besides, I don't even think it would work by the time I switched back to "live" NetFlix. So, I have all this stuff and I still can't watch a movie on TV.

    I guess that there is 2 possibilities that I can think of.
    One is that you are using a single IP address and only one device is getting it at any given time. However with a router I would not think that this is the issue. But just to be sure... I am assuming that the Netgear router's WAN/Internet port is connected to the Comcast modem. The Netgear router should be configured with it's DHCP services enabled. I am assuming that the AirPort Express (AX) is connected via Ethernet to one of the Netgear router's LAN ports. The AX should be configured to act as a bridge (not sharing a single IP address).
    The other possibility is that the bandwidth is getting entirely consumed by the Samsung Blu-ray and the MacBook has no opportunity to get any data.

  • I cannot get my iPod to sync to iTunes. When I try to sync it, a box appears which reads: "An unknown error occurred (13019)."

    I cannot get my iPod to sync to iTunes. When I try to sync it, a box appears which reads: "An unknown error occurred (13019)."

    Have a look at the  More Like This  Section on the right...

  • HT4972 i have updated my itunes but when im restoring my iphone 5 phone it keeps coming up with 'unknown error occurred (3) please help as i cannot even turn my phone on now

    i have updated my itunes but when im restoring my iphone 5 phone it keeps coming up with 'unknown error occurred (3) please help as i cannot even turn my phone on now

    Hello there, BundyA.
    Error 3 is usually associated to security software settings. The following Knowledge Base article provides some great information and links for troubleshooting the issue:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    This section should prove useful:
    Configure your security software
    Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
    Common errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Cannot stream ipod music on iphone 3g

    I can successfully connect my iphone to my VW RNS510 phone system to receive/make calls. The system also has the ability to accept A2DP connections, to play audio through the stereo. In online demos, I have seen a bluetooth icon on the ipod play screen, allowing the audio to be sent via bluetooth. On my unit, I cannot get the icon to display, and therefore cannot stream my music. Although my phone connects without issue and I can listen to voice messages through the car stereo I cannot direct my music to the bluetooth connection.
    I have the latest OS. Any thoughts/suggestions.
    Thanks

    Seems like the iPhone is not aware that your system is A2DP capable. Maybe a re-pairing will help. Try erasing the device from the iPhone bluetooth list and pairing again.

  • Help, I have the zinio app, the golf magazine app in my newstand, however I cannot access the magazine, it keeps coming up, attention an unknown error has occurred. When I push ok, it comes up 4/6 more times,

    I have the zinio app, the golf magazine app in my newstand, however I cannot access the magazine, it keeps coming up, attention an unknown error has occurred. When I push ok, it comes up 4/6 more times, why is this happening, please help me?

    Try here >  iTunes Store: Purchasing and managing auto-renewing subscriptions

  • ITunes on Windows Vista PC can't connect to AirPort Express. PC returns error message -15000

    I'm running PC with Vista and newest update iTunes.
    I have set up a network through my AirPort Express, and i am streaming music wirelessly from my PC to AirPort. This used to work, but now i get an error message saying that an error occured while connecting to the AirPort, with the error code -15000. What's wrong? this used to work earlier?
    This is particularly annoying since it used to work, until the latest (or the one before that) iTunes update.
    Need help!

    This is always a Windows firewall problem. Try opening UDP port 6002 in your firewall software.

  • Airport Express and iTunes give error: 'An unknown error (-15006) occurred while connecting to the AirPlay device'

    Hi guys & girls,
    Yesterday I bought an Airport Express 802.11n (1st generation); solely for the purpose of listening to my music without connecting any cables to my speakers.
    I've done the set-up (i.e. linked the AE to my existing network without any Ethernet) and connected the AE to my speakers, and the light turns green. However, when I try to make a connection in iTunes to the base station, I get the following error: 'An unknown error (-15006) occurred while connecting to the AirPlay device “Base Station 5bf269”.'
    I'm quite a noob with computers and the technical aspects, however, I normally get around by googling and trying out some things. I've tried the following things already:
    - Downloaded Airport Utility 5.6 to change the IPv6 to Host (Configuration is set on automatic)
    - Firmware update for the Airport Express to 7.6.1
    My iTunes version is 10.6.3, am using MacBook Pro Mac OS X 10.7.4. I really have no clue what could be wrong and how to fix this. I'm only sitting 2 meters away from the AE so it cannot be about the range. Can someone help me please?
    Thanks!!

    No more need for an answer... the problem has been solved!

  • Cannot connect to AirPlay any more (AirPort Express)

    I have been using AirPlay with my old AirPort Express for a few months without any problems.
    After the recent iTunes update (I believe), it no longer works.
    It shows this message for a long time:
    Connecting to "AirPort"...
    And then this:
    An unknown error (-15006) occurred while connecting to the AirPlay device “AirPort”.
    After that, the option to play from the AirPlay speakers disappears in iTunes:
    And I can no longer access the AirPort Extress via the AirPort Utility (5.6):
    I have tried disconnecting the AirPort from the power, resetting it twice, and restarting my Mac.
    What else can I try?
    (I am running the latest Lion on my MacBook Pro.)

    So I re-set it, the AP Express had a green light eventually, but it was taking FOREVER on this part, saying "Waiting for AirPort Express to restart...", even though it had already restarted and the light was solid green:
    Then, after waiting so long, I get this error (-6753):
    So now I can't even set it up properly...

  • Can't get burned CD to be read on my laptop itunes which I'm trying to transfer music to. It just says 'track 1' for the entire CD, and can't be copied. Says unknown error -50 when I try to import. Any ideas?

    So...I'm trying to transfer my itunes music to my laptop. I set up a new itunes on my laptop and, with great difficulty (I'm not technical), I've managed to be successful with the help of my memory stick, which saves wasting CDs.
    However, for some reason a few tracks by a couple of artists don't seem to have transferred. So I had the idea to burn a CD and then copy that directly to my laptop.
    There doesn't seem to be any trouble burning the CD - that works fine. I just select audio CD, and done within a minute or so. But when I then put the CD in my disc drive, it doesn't work.
    It says 'track 1', with no other tracks for the entire CD. When I try to import it, it says 'unknown error -50'. I've tried tinkering with the import settings, but it makes no difference.
    Does anyone have any ideas?
    I'm not that computer literate, so please make it idiot proof

    You can use the bootstrap tar.gz files that are found in the same directory as the iso on every mirror.  If you go to the download page, select the mirror of your choice, you will see a file called "archlinux-bootstrap-2013.10.01-x86_64.tar.gz" (one for i686 also).  That is what you need.
    Unpack it whereever you think is appropriate, if you have enough RAM you can use /tmp.  Then after setting up the partitions in the host (Kali/Debian, or whatever), you can arch-chroot to that unpacked directory.  There you will find all the tools necessary to install (pacman and the arch-install-scripts).
    This method has one issue though, and that is that the arch-chroot script (and maybe others) requires some pretty new versions of various things.  In particular, I think that a pretty new version of bash is required.  So I am not sure about the viability of this solution on anything debian, as their stable repos tend to be pretty conservative.  It also means that you need to have a pretty good understanding of the install process, as you will still mostly follow the beginners guide, but it will require a few changes in the procedure.
    Good luck.

  • My iphone 5S is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and updating it to the new software, and backing it up but it keeps saying unknown error 4005, Also when I first tried backing up my

    My iphone 5S is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and updating it to the new software, and backing it up but it keeps saying unknown error 4005, Also when I first tried backing up my phone on my computer it would begin the processes then half way through it would say IPHONE has been disconnected, now it won't recognize it or anything. what can i do? This is a brand new phone!!!

    Hello jraff21,
    I was able to locate a support article for the error you mentioned. The following steps may help you get your device back to working order:
    iOS: Restore errors 4005, 4013, and 4014 - Apple Support
    You may see one of these messages if the device unexpectedly disconnects during the update or restore or iTunes couldn't tell the device to go to the restore state.
    The iPhone [device name] could not be restored. An unknown error occurred (4005).
    The iPhone [device name] could not be restored. An unknown error occurred (4013).
    The iPhone [device name] could not be restored. An unknown error occurred (4014).
    Try these steps to resolve the issue:
    Install the latest version of iTunes.
    Restart your computer.
    Make sure your computer is up to date. If an update requires a restart, check for updates again after you restart.
    Restore using another USB cable.
    Learn more about updating OS X.
    Learn more about updating Windows.
    Restore your device on another computer.
    If you continue to see error 4005, 4013, or 4014 when you restore your device,contact Apple for support.
    Learn more about other update and restore errors.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

Maybe you are looking for

  • Error while downloading the ConnectNow addin

    Hi there, I was trying to share my screen through ConnectNow with FlashPlayer 9 installed on a Windows Server 2003 machine with IE7 as the browser. Everything appeared fine until when I clicked the Share my screen button. It required a ConnectNow plu

  • Need info on getting my client set up to be able to log on to BC and change text.

    Can't seem to find that info! Paige Powell

  • Can't create a transition effect in flash cs4

    hey, I'm having trouble creating a fade in transition using flash cs4. I've tried to using windows > behaviors but there is not option for screen > transition. Does anyone know the actionscript code for a transition? Or how to put one in. I have 2 fr

  • Backup of weblogic portal domain

    Hi, I want to know the procedure of backing up the portal domain.I have tried taking the entire domain directory and archiving it,but this didn't work. I observed that there are datasources storing the portal config data.Even at the time of archiving

  • Adding or importing iTunes Visualizers

    I've been curious to know if anyone knows of or has found a way that visualizers in iTunes can be moved or imported from different machines. The task I'm trying to figure out, is the Jelly visualizer that's available in iTunes on 10.5/10.6 machines,