My iTunes only plays one song

All of a sudden, my iTunes will only play one song and then stop. I have to choose each song to make it play. Any clues?

Select all of the songs and right-click (or control click) and choose the option to check selection. It should put the check back on all of them.I think you can also shift click or command click in the box and it will do the same. (not sure on that)

Similar Messages

  • ITunes only plays one song at a time ... help please

    All of my songs are checked, but iTunes only plays one song at a time. I can't figure out why. Any suggestions? It just started doing this.

    You don't mean you want it to play multiple tracks at the same time, do you? Like where you would hit play and ALL the songs would start playing at the same time?
    Or do you mean iTunes will only play one song then stop rather than going on to the next one?
    Patrick

  • ITunes only plays one song at a time, it wont play my playlist or library

    all of a sudden my itunes will only play one song and then stop and when i press the "next" button, it just stops the song playing. and now there are check boxes in front of each song and i dont know what it means? i just want to be able to put my library on shuffle and play through them!!

    The check boxes have been there for as long as I can remember. You can see them in screenshots back as far as iTunes 1: iTunes Screenshots
    The check boxes have a number of uses: iTunes: Understanding the Symbols Next to Songs
    Unchecked songs will be skipped when playing songs from the library or a selection. They will only play when individually clicked on.
    Smart Playlists have an option that unchecked songs won't appear.
    Unchecked songs will not be burned to CD.
    The iPod has an option to only sync checked songs
    The Genius & iTunes DJ features will ignore unchecked songs
    Basically unchecking is a way of telling iTunes to ignore the item and exclude it from other automatic features.

  • ITunes only plays one song at a time

    After much toing and froing on my new computer, I now have all my songs re-imported into the library. However, iTunes will now only play one song at a time: after it plays one song it just halts; the forward arrow is just greyed out. Any ideas would be most welcome!

    Try checking all of those little boxes. To check all at once, hold ctrl while checking one.

  • ITunes only playing one song at a time

    Since the 7.6 upgrade in January, my iTunes is only playing one song before stopping. Do I need to reinstall? Will wiping out the instance of iTunes on my PC blow away my music or video libraries?
    Thanks in advance

    just curious, I have a large library (over 6K songs) and I used to have them all 'checked' so I could play until my hearts content...now, all the checkmarks are gone. I really don't want to click all 6K song titles and when I 'select all' it doesn't add a checkmark. I searched the knowledge base, but a solution to this simple request seems to be evading me.
    Can you provide me any suggestions to get ALL my songs with a checkmark?

  • Itunes only plays one song at the time

    My Itunes plays only one song at the time. If I try to play the next one by pressing the "forward" button Itunes stops playing.
    What now????
    Geertvun

    Are the songs 'checked'?
    iTunes only plays the next checked song when pressing the forward button.
    To check/uncheck all songs, command-click on one of the checkboxes preceding the name of the song.
    Hope this helps.
    M

  • ITunes only plays one song at a time after upgrade to 6.0.1

    This is MOST annoying!! When I play music from either library or playlists on my computer only one song plays and then it is done.It doesn't crash or anything, it just stops. I can click the repeat button till the cows come home and only one song plays--and doesn't repeat even if repeat song is checked. This is not a case of a playlist with "song preview" only playing the first song--this is any song, anywhere. Anyone else have this porblem? I have searched everywhere I could find and have not seen any reference to this problem.
    Thanks in advance.
    Brenda
    P.S.--I HATE upgrading iTunes! Had I not gotten a new pod for Christmas I would still be on 5 (after all the problems getting it to work with my POP mail program).

    This is MOST annoying!! When I play music from either
    library or playlists on my computer only one song
    plays and then it is done.It doesn't crash or
    anything, it just stops. I can click the repeat
    button till the cows come home and only one song
    plays--and doesn't repeat even if repeat song is
    checked. This is not a case of a playlist with "song
    preview" only playing the first song--this is any
    song, anywhere. Anyone else have this porblem? I have
    searched everywhere I could find and have not seen
    any reference to this problem.
    Just to the left of every song is a little box. When you click it, a check mark appears in it and the box turns blue. iTunes will only "automatically" play checked songs. Unchecked songs get skipped.
    So if all your songs are unchecked, iTunes will do exactly what you're describing it as doing. It'll play anything you tell it to, then stop, because it doesn't play unchecked songs unless you specifically tell it to play them.
    Go to the Library, hit CTRL-A to select all your songs, then right click one of them and select "Check Selected Songs" or something to that effect. This will check all those songs and your problem is solved.

  • ITunes 8.0 only Plays One Song at a Time, then Stops! AARGH!

    Someone, please help. I have tried everything I can think of, to no avail.
    For some reason, when I play a song in my Music Library on my laptop iTunes 8.0, it stops playing after each song. When the song ends, iTunes stops; it does not move to the next song in my library, it just stops. I have to click on the next song to play that song, and when that song is done it stops.
    I have tried creating Music Playlists, does not help. I have tried checking and unchecking the Repeat and Shuffle options, still nothing.
    This does not happen on my iPods, only when I play songs in my Music Library on iTunes from my laptop.
    If you have any suggestions for a solution, please tell me. I am beyond frustrated having to click on the next song every time.

    I have the same problem with iTunes only playing one track at a time. It didn't use to be this way ... and seems to have developed after one of the recent updates (late December 2008).
    I did, however, find that the problem was "solved" by checkmarking all the tracks that I expect to hear played. However, this won't work for me because ... as it has always been in the past ... I use these check boxes to tell iTunes which tracks to synchronize to my iPod. Since my desktop library is many times larger than can be loaded onto my iPod, I obviously cannot check all of the tracks.
    Since when did these check marks become **ALSO** a signal to tell iTunes what tracks to play continuously on iTunes?!?
    Previously, I have **ONLY** used these check-marks to signal to iTunes the tracks that should be synchronized to my iPod.
    If the foregoing advice (check-marking all songs to be played continuously on **iTunes** ... then it would appear that the programmers have introduced a conflict of functions in the iTunes user interface.
    The check-mark system is a simple and intuitive method to select which tracks to synchronize to the iPod ... it is not at all intuitive that you would be expected to check these **SAME** check-boxes to play tracks on the iTunes desktop.
    Generally, when listening to music at home on iTunes, I prefer to listen to albums as published from the first track to the last track. Occasionally, I may wish to shuffle tracks within an album or within a genre.
    However, when on the go, I sometimes shuffle music entirely. In any event, I cannot possibly download my entire library onto my iPod because of memory limitations.
    In conclusion, I do not wish to tamper with my check-marks ... I know, at any time, how much memory is currently in use on my iPod and so can add and/or delete check-boxes to adjust the tracks from my iTunes main library that are played on my iPod.
    Of course, then, I am massively frustrated that I cannot listen to albums continuously without messing-up my iPod library selections.
    This was never a problem before ... why has this behavior changed?
    This could, of course be resolved if the Apple development team added a command "Continuous Play" [On] or [Off] ... say under the [Controls] menu, logically placed above the "Shuffle" menu item.
    Comments?
    Does anyone on the Apple iTunes development team monitor this discussion?

  • HT1349 When listening to songs on my itunes acct (without ipod attached), I can only play one song at a time. It doesn't automatically play next song on list. It happens with all playlists. It only started happening when I downloaded the latest itunes upd

    When listening to songs on my itunes acct (without ipod attached), I can only play one song at a time. It doesn't automatically play next song on list. It happens with all playlists. It only started happening when I downloaded the latest itunes update.

    Are all songs checked in your playlist?

  • My Itunes will load on Apple TV and play, but only plays one song at a time.  It will not shuffle or continuously play an album.  All of the songs display, but will only play one at a time...home sharing is on.  Any suggestions?

    My Itunes info will load onto Apple TV, but will only play one song at a time of my music.  Home sharing is on, airplay is on, router info has been reset.  What am I missing?  It has never done this before....

    My Itunes info will load onto Apple TV, but will only play one song at a time of my music.  Home sharing is on, airplay is on, router info has been reset.  What am I missing?  It has never done this before....

  • After i have downloaded an album from iCloud to my new macbook pro. Itunes will only play one song at a time. If i hit the fast forward or back button will not do anything. I have to use the mouse to hit the next tidal in the album then hit play for it

    after i have downloaded an album from iCloud to my new macbook pro. Itunes will only play one song at a time. If i hit the fast forward or back button will not do anything. I have to use the mouse to hit the next tidal in the album then hit play for it to play the next song. Or put it in the UP NEXT.

    First, make sure these items have checkmarks next to their names in iTunes. Continuous playback only works on checked items. Itunes will play all checked items in a list whether or not they're from the same album.
    If you see that nothing in your library is checked and you want to check everything, hold down Ctrl while checking an item. This checks everything.
    Next, fixing the "1 of 1" problem is easily. Select all the tracks that make up the book/album. Let's say there are 15. Press Ctrl-I. Doublecheck that the album box is filled in with the name of the book, and if not, type it there. Enter "15" in the box for the total number of tracks. Click OK. Now all the items should be "1 of 15," "2 of 15," and so on.

  • Since update iTunes will only play one song at a time.

    I know there is probably a simple solution but I can't find it. iTunes will only play one song and then it's done. It won't continuously play from my libray. I have over 5000. I don't know what I am doing wrong. I just can't find the solution. I even click on the next button and it stops.

    Make sure all songs have a checkmark in front of them.

  • ITunes will only play one song. I have to hit play to start a new song. I have the shuffle on and I am in a playlist. I am running Windows 7. How do  I correct this to randomly play music, by itself?

    iTunes will only play one song. I have to hit play to start a new song. I have the shuffle on and I am in a playlist. I am running Windows 7. How do I correct this to randomly play music, by itself?

    That's consistent with all the tickboxes to the left of the tracks (in Song view) being unchecked.
    Go into Song view and Ctrl-click one of the empty boxes to do a "global recheck".
    If you can't see the tickboxes, head into your General preferences tab and select "Show list tickboxes" as per the following screenshot (it's for an earlier version of iTunes, but the boxes are in roughly the same place in the recent versions 11.x):

  • Help!  itunes will only play one song at a time

    My itunes is acting screwy. I open a playlist and play the first song, and itunes only plays that song. it won't keep going forward. it doesn't freeze up; i just have to manually play the next song. this just started yesterday with no adjustments, new downloads...no nothing. does anyone know what is going on? i have already uninstalled and reinstalled itunes, but to no avail. same problem. is this a setting somewhere that i don't know about?
    cat

    Are the boxes beside each song checked? iTunes will only play the songs that are checked. To check all the songs press control + click in any box. To check only some songs, you can highlight them and then right click and choose check selection.

  • Only Plays One Song at a Time ???

    I'm trying to listen to albums in my library but iTunes will only play one song at a time, very annoying to have to down arrow and click play after every song. How can I make iTunes play through my library without stopping?
    I'm using iTunes 10.1 (54) and YES all the songs are checked.
    Thanks~

    <SOLVED>
    I disabled the Ping drop-down from the Terminal with:
    defaults write com.apple.iTunes hide-ping-dropdown -bool TRUE
    and viola! Now my library plays without stopping after just one song. Not sure why this fixed my problem but it did? I guess it's just another reason to get rid of Ping!

Maybe you are looking for

  • Premiere Pro CC 2014 Crashing/Not Responding on Windows 8.1

    Unfortunately I "upgraded from CS6 to CC 2014 and can no longer do work.  The program stops functioning properly after a few minutes, whether or not I am doing anything or letting it sit.  It is not an outright crash, but what happens is that the vid

  • PC Suite 6.83 problem

    Hi, Nobody has a solution to my earlier post ? In addition to it. I see that PC Suite hooks into the DELETE, SHIFT+DELETE and RIGHT-CLICK MENU commands to startup the ServiceLayer.exe windows service. How do I prevent this ? If no one can solve my pr

  • Can I take my apple TV with me when I travel?

    Hi, thanks in advance for help. I want to travel to our second home in another country.  I have the latest Apple TV.  Can I just take it, plug it into the network and HDMI to TV and use it as I would normally at home.  Meaning, can I access via the c

  • Query Help (For Election Purpose)

    Hello, Oracle Version: 10G OS: Windows XP SP-3 create table election (areacode number(2),boothno number(3),Smith number(4),John number(4),tot number(5)); insert into election values (1,1, 5,2,7); insert into election values (1,2,10,0,10); insert into

  • ODBC  ?

    I have a VB utility which connects to 10g db and helps in customisation of a d2k application. It was working well, but now gives error as 'Oracle error occurred,but error message couldn't be retrived from Oracle'. I rechecked MS-ODBC for Oracle in my