My itunes was working fine untill i tried to download the most current version of itunes. now it wont boot up and has error messages,error7(windows error 126) and MSVCR80.dll

my itunes was working fine until i tried downloading the most current version of itunes, now when i try to get on my itunes library, it wont boot up and has error codes, error 7, and( windows error 126). it also says that MSVCR80.dll is missing from my computer,please re install itunes. but when I try to re install it it will not install on my computer.

See Troubleshooting issues with iTunes for Windows updates.
tt2

Similar Messages

AirPort Extreme wireless was working fine until I tried to add the extreme to extend network range...now neither is working and I can't fix.

Help please? I got the Express yesterday and had it set up and working fine. However I found the signal and connection wasn't going far enough/fast enough for all areas of my home I wanted it to. Today I got the Extreme. I unplugged the Express, plugged in the Extreme and set up the new wireless network for that one just fine and it was working great. However, I still wasn't getting quite the connection/speed I wanted through out my house, so I tried to add the Express to extend the network I set up from the Extreme and now neither one is working. I tried resetting and starting over from the beginning but I can't even get just the Extreme to work by itself and am not sure what to do.

The following are the basic steps to configure an extended network with two 802.11n AirPort. Please take a look to check if anything was missed when you configured yours.
Dynamic WDS - Extending a Wireless Network Setup
If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
Open AirPort Utility, and then, select the base station that will connect to the Internet.
Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
Click AirPort in the toolbar, and then, click Wireless.
Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then, select the “Allow this network to be extended” checkbox.
Next, select the base station that will extend this network, and then, choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then, choose the network you want to extend from the Network Name pop-up menu.
Enter the base station network and base station password if necessary.
Click Update to update the base station with new network settings.
(ref: Pages 43-44 of Apple AirPort Networks.)
(ref: Wi-Fi base stations: Extending the range of your wireless network by adding additional Wi-Fi base stations)

Hello my question is why do i get a error message now that I have done alot of updating of my system it old, but I got it back up and running Itunes was working fine until in an update of the system files then Itunes can't burn the play lists to the

Hello
I recently had to reinstall my software for a
dell computer a dell latitude d 830, then after installing all of my software and such including itunes the player did well even record to disks with no problems now that my system has done alot of updating of system files....now the itunes does not burn to my cd...error message 2131 this time ..this has occurred several times on this sytem and and as well as other system this one has window vista 64 bit home prem. why is the itunes not working to burn my disks
it worked fine before the updates to the system and the itunes software is up dated as well...can someone suggest something
thanks for your time in this matter
sadeyesjlee

I recently had to reinstall my software for a
dell computer a dell latitude d 830, then after installing all of my software and such including itunes the player did well even record to disks with no problems now that my system has done alot of updating of system files....now the itunes does not burn to my cd...error message 2131 this time
The 2131 usually indicates firmware needs to be updated on a drive.
Head to your drivers and downloads page for your latitude at Dell, and check for updates to your firmware for your optical drives. If you're behind and you update, does that clear up the 2131?

Hi there I have a iPhone 3G and it was with O2 but needed to go onto 3 network so someone on my local market unlocked it and the phone was working fine until I tried to update it through iTunes and it always now stops loading towards the end with an erro

Hi there
I ha
Hi there I have a iPhone 3G and it was with O2 but needed to go onto 3 network so someone on my local market unlocked it and the phone was working fine until I tried to update it through iTunes and it always now stops loading towards the end with an error is there a way to get the phone working again please.

Shame you had the iPhone hacked as O2 usually unlock their customers iPhones happily.
We cannot discuss your problem as it is in breach of the Ts&Cs you agreed to on registering
However hint ....you have probably trashed it

Trying to download gifts, Apples says I need to upgrade to the laster version of iTuens. I have the most current version of iTunes. What's up?

I have been trying to download gifts, Apples says I need to upgrade to the latest version of iTunes. I have the most current version of iTunes. What's up? Is there a work around for this? Thanks!

The requirement shoul be on the box the iphone came in. they are also on the website
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.7 or later (free download from www.itunes.com/download)"

I downloaded the most recent version of iTunes and now it won't launch

I have a PC with over 800 gb of space, most of which is unused, and am running Windows 7, and when I opened iTunes (which opened and worked just fine) I was prompted to download the most recent version of iTunes and iCloud. Upon completion of the download, which indicated it was successful, I had to restart my computer. When I tried to launch iTunes this time, I got two error messages: "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link library iAdCore.dll" and "iTunes was not installed correctly. Please reinstall iTunes."
Last summer I got to the point where I was unable to access iTunes at all and worked for weeks with Apple support to correct the issue to no avail. I had my computer in the shop and they were able to clean up a couple of corrupted files, and thereafter iTunes worked great.
I'm afraid to uninstall iTunes for fear I'll never get it back. Anybody have suggestions?
Thanks,
Littleredz24

P. S. Just got brave and uninstalled iTunes and re-installed it. Got the same error message: Entry Point Not Found - The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link library iAdCore.dll
Now I can't get to iTunes at all. Help, please!
Littleredz24

HT1152 I downloaded the most recent version of itunes and now I cannot burn CDs....the CD burner and drive are gone....any help???

Yesterday I downloaded the most recent version of itunes and created a playlist....i was unable to burn it to a CD. Message was there was no burner...it's like the entire drive is missing from my computer. My computer tech guy said the same thing happened to him but he hasn't found the fix yet. Any help???

Whilst it may not be your fault I am afraid it appears that your post is on a forum which is not the best for your OS. It will save the time of the unpaid volunteers here, and may resolve your issue faster, if you could examine the list below and see if there is a more appropriate forum to which you could direct your question.
OS X 10.9 Mavericks
OS X 10.8 Mountain Lion
OS X 10.7 Lion
OS X 10.6 Snow Leopard
OS X 10.5 Leopard
OS X 10.4 Tiger
OS X 10.3 and earlier
OS 9, OS 8 & System 7
OS X Technologies
OS X Server
iPad
iPhone
iPod
Other

My phone is not showing up in itunes. I want to sync it. I have a MAC and I have restarted the phone, it's charged, I have the most current version of itunes. What do I do now? It says to reinstall itunes if you have windows but not for mac. Help!

My phone is not showing up in itunes. I want to sync it. I have a MAC and I have restarted the phone, it's charged, I have the most current version of itunes. What do I do now? It says to reinstall itunes if you have windows but not for mac. Help!

With your phone plugged in, open Image Capture and see if the iPhone shows up. If not, you are having a sync problem. If it shows up in Image Capture, but not iTunes, I'd delete iTunes and reinstall it.

I am at the most current version of itunes, but when i try to burn a cd i get an error stating disc burner or software not found - any help?

I am at the most current version of itunes, but when i try to burn a cd i get an error stating disc burner or software not found - any help?

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

After I downloaded the most recent versions of itunes and quicktime I cannot play any videos, tutorials. Thank you for any help.

Videos will not play after downloading the mmost recent versions of Itunes and Quicktime. What can I do? The video tries to start but freezes and does not respond.

Appreciate the suggestion. I did the repair, but videos still don't play.
I tried putting quicktime in "safe mode", but that also did not solve the video-play problem.
However, I downloaded a video and that video does play.
A video may start but quickly freezes.
In itunes is the player "quicktime or itunes"?
When I open the quicktime player(its appearance doesn't look like a player with controls for play, pause, etc.).
Maybe the controls appear when play begins' however, then I try to open any song of video, I always get the same message: "Do you want to allow this website to open a program on your computer(in itunes, I assume).)
If i choose "yes" I get an error message.
I thought this additional information might be helpful, but you can just answer the original question if you have some additional ideas.
Thanks for your help.

Since downloading the most recent version of iTunes, I have to accept the software terms and conditions every time I open iTunes

Since installing the most recent version of iTunes, I have to accept the software terms and conditions every time I go in to iTunes. I sign in to my account, but when I re-open iTunes, as well as having to accept the terms and conditions before continuing, I find that iTunes has logged me out of my account. None of this has happened before. I am using a PC with Windows 8.

See Empty/corrupt iTunes library after upgrade/crash.
tt2

3.6.26 is working on my OSX 10.4.11 PPC, but it keeps asking me to download the most current version for my system... why?

I've dowloaded and updated 3.6.26, which Firefox stated was the most current version, but when I restart the browser, it then states I'm NOT running the most current version for my system... why?
I'm running a Mac PPC G4 10.4.11 Thanks for any assistance you can provide :)

Thanks for the Reply Alice... :) The message is when I restart Firefox, which activates the update, and the 'thanks' page on Firefox's site (not Google)... So, I'm curious why it gives me my most current update, then tells me that there might be a more current version for my system... very strange! Anyway, I'm definitely sticking with 3.6.26, unless I get info that suggests there's a .27 or .28 flying around that may be useful... I will definitely NOT go to 9 or 10.... :)

ITunes "Check for Updates" says 7.3.1 is the most current version

Hi all.
We all know 7.3.2 is out. But when I go to "iTunes--->Check for Updates" in iTunes, it says 7.3.1 is the most current version. What gives?
Thanks in advance.

Also make sure that you don't move your Apple apps from their default location. If you do then the Software Updater doesn't know where to look to see what version that you currently have.
MJ

ITunes doesn't see my iPad. Tried all the fixes, except reloading iTunes. I have the most current version of iTunes. Computer sees iPad as camera. Any ideas?

iTunes doesn't recognize my iPad. Computer just sees it as a camera. Tried all the fixes, except for reloading iTunes; I do have the most current iTunes available. Any ideas?

Nobody from Apple answers any questions here other than those that go longer than 24 hours without a response and all that those Apple people do is to direct users to kb articles that might help in given situations. It pretty much ends there. So don't expect "Apple" to hear your pleas.
if you want help from Apple, make an appointment at an Apple store and see if they can diagnose the problem for you. The only other thing that I could suggest is to connect your iPad to another computer running iTunes. If iTunes sees the iPad, then the issue is on your computer somewhere. If you try this, you want to turn off auto sync on the other computer. Launch iTunes and go to Edit>Preferences>Devices>Prevent iPods, iPhones and iPads from syncing automatically.

HT1926 I just downloaded the most current ver of iTunes and it did not make it. Now I get a runtime error. Not sure what to do.

I tried to download and install the latest versionn of iTunes and it didn't update. Now, each time I try to go into the program it says "Runtime error an application attempted to load the c runtime lobrary incorrectly. Is there a way to fix this, or do I need to completely lose all of my music by re-loading a new version. I need to get it back someway without losing everything. HELP!

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later). This was posted earlier by TuringTest2.
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes

My itunes was working fine untill i tried to download the most current version of itunes. now it wont boot up and has error messages,error7(windows error 126) and MSVCR80.dll

Similar Messages

Maybe you are looking for