My itunes will not detect any devices. When i do plug in a device it comes up with new hardware found then asks me to install it as a digital still camera. I have uninstalles and reinstalled itunes but that didnt help

Plaese help

too funny   i wrote this and literally 1 minute later found a post that hrlped fix it.  deleting the iTunes folder in the following location.
C:\Users\(usrname)\AppData\Roaming\Apple Computer

Similar Messages

  • HT1386 Itunes will not detect any of my devices

    Itunes will not detect any of my devices.  Any suggestions?  I've shut down and restarted, turned devices off and on.  Not sure what else to do.

    Hello, bone61. 
    Thank you for visiting Apple Support Communities.
    If your device is not recognized by iTunes, I would recommend the steps in the article below.  Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.  If the issue persists try all remaining steps. 
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H.

  • I recently updated to the latest version of iTunes and now get a message saying 'Registry settings for iTune drivers are misng for Cd burning' I have uninstallled and reinstalled iTunes and tried everything to repair the problem but still have no optical

    I am using OS  64 bit Windows Vista Home Premium and recently updated the latest version of iTunes. (I only have this CD burning software on my Laptop). Ever since updating, I  received the message 'Registry settings for the iTune drivers are missing for CD burning'. The drivers for Lower and uppper filters in the registry are missingand I now have no optical drive.  I have unistalled and  reinstalled Itunes and manually entered the filters. Have tried everything including something called GEAR driver installer which was suggested on several technical sites. Everything  was working fine in iTunes until I updated it.. It's strange I can still import music but not burn?? Friend s have told me they have ha dthe same problem when updating iTunes but resolved the problem by uninstalling/reinstalling or altering registry keys.
    Today I went to use my Epson Printer and now have problems with it not working. I decided to uninstall/ install printer software and  still can't get it to work either. I may be wrong but his all seems connected to me?
    I have been trying for days to get  telephone support and  been told today you have to pay
    Please can someone help me before I throw the lot out the window!!!!

    Many thanks b Noir
    This is a copy of ONEof the keys  in the registry I changed  as told by Apple support today. I also have changed others as instructed by GEAR  software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others  they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so  I downloaded the software and installed again.
    Sorry, just this minute went to insert image  and it is giving me a message saying this sort of content  is not allowed?.
    The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr  SiRem GEARAspiWDN.
    The GEARsoftware info about manually deleting  GEAR drive is from:
    http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
    I hope you can help

  • Hi, my itunes will not work.  I get a message saying it is out of date.  But I have uninstalled and reinstalled itunes and I get the same message?

    hi, my itunes will not work.  I get a message saying it is out of date.  But I have uninstalled and reinstalled itunes and I get the same message?

    When uninstalling iTunes on your windows computer, there is a specific way it must be done in order to completely uninstall all components of the software.  Ensure you follow the article for your correct OS.
    Did you do this when uninstalling??
    Windows XP - http://support.apple.com/kb/HT1925.
    Windows Vista or Windows 7 - http://support.apple.com/kb/HT1923.

  • I have installed latest update for itunes but it will not install and I receive a message Apple Mobile device failed to start. I have uninstalled and reinstalled itunes but have the same problem. I am using windows 7 and internet explorer

    I have downloaded the latest Itunes update, but it will not install and I receive a message 'apple mobile device failed to start'. I have uninstalled and reinstalled itunes but still have the same problem!

    Hi there willjay3976,
    You may find the troubleshooting steps in the article below helpful.
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    -Griff W. 

  • I just got an ipod touch but it will not sync to itunes. my itunes will not detect it. but my computer does. what do i do???

    i just got an ipod touch but it will not sync to itunes. my itunes will not detect it. but my computer does. what do i do???

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • HT1386 itunes will not recognize any of my devices when I try to sync them

    itunes will not recognize any of my devices when I try to sync them. How cn I fix this?

    Hello, bone61. 
    Thank you for visiting Apple Support Communities.
    If your device is not recognized by iTunes, I would recommend the steps in the article below.  Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.  If the issue persists try all remaining steps. 
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H.

  • Using windows 8 - receive message "ipod detected but cannot be identified" when connecting ipod nano 7th gen. Have unisntalled and reinstalled itunes from apple site as advised with no luck. Has anyone else had this problem and resolved it please?

    Using windows 8 - receive message "ipod detected but cannot be identified properly" when connecting ipod nano 7th gen. Have unisntalled and reinstalled itunes from apple site as advised with no luck. Has anyone else had this problem and resolved it please?

    This is how it's displayed: http://i50.tinypic.com/nd7vk7.jpg
    And this is what happens when I click properties and 'search for solutions': http://i47.tinypic.com/2iu3vrc.jpg (the box disappears after that, apparently having done nothing, when I search online for software it informs me my computer already has the best/latest installed)
    I use a Toshiba Satelite L350-170, my Vista is a 32-bit Thankyou!
    Message was edited by: Martha11

  • I have uninstalled and reinstalled iTunes several times, but keep getting an error message that "the registry settings for importing and burning CD's and DVD's is missing".  Can anyone help with this?

    I have uninstalled and reinstalled iTunes several times, but keep getting an error message that "the registry settings for importing and burning CD's and DVD's is missing".  Can anyone help with this?

    It keeps telling me to reinstall iTunes, but it continues to come back with the same error message.

  • HT1386 iTunes will not detect my iPhone(5s) after the most recent update.

    Ever since i updated iTunes it will not detect my iPhone, every time i plug it in it asks to trust the computer which I always use to sync my iPhone. Every time i select "trust this computer" and it still won't detect it. PLEASE HELP.

    Hello fercho965,
    Sorry to hear that your iPhone is currently not recognized by iTunes.  I found an article with steps you can take when you experience an issue like this.  I wasn't sure whether you were using a Windows or Mac computer, so I included the respective articles for each:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • My ipod touch will not detect any wifi signals but other devices are connected to the wifi; please help!??

    My ipod touch will not detect any wifi signals but others devices such as my laptops; do connect without a problem. I restored my ipod and updated it and still no wifi signals are being detected.

    Go to your ipod touch wireless settings chose your network and right beside there is button looks like ">" click on that check the dhcp what IP are you getting? do you get any ip? if you do your ipod touch should work with wireless no problem. Also, you may have to enter wep key again.  After that it shou,d save your device

  • How do I sync my iPhone 5 to my new PC? iTunes will not recognize it even when plugged in the USB port. Settings General iTunes wifi sync is still my old laptop. Any help is appreciated.

    How do I sync my iPhone 5 to my new PC? iTunes will not recognize it even when plugged in the USB port. Settings>General>iTunes wifi sync is still my old laptop. Any help is appreciated.

    See also Recover your iTunes library from your iPod or iOS device.
    tt2

  • Hello, why is all of my music on my iphone but only a few songs on my itunes on my laptop? it seems like its not updating on my laptop because it still says i have credit and i know i that there isnt any please help thanks

    hello, why is all of my music on my iphone but only a few songs on my itunes on my laptop? it seems like its not updating on my laptop because it still says i have credit and i know i that there isnt any please help thanks

    If they are iTunes purchases that you bought on your phone then have you copied them over from it to your computer's iTunes ? If that is the computer that you sync the phone to then you should be able to copy them over by connecting it and doing File > Devices > Transfer Purchases. Or (depending upon what country that you are in) you might be able to redownload them directly on your computer's iTunes via the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage.
    In terms of your account's balance, have you tried logging out of your account on your computer (Store > Sign Out menu option) and then logging back in (it will change to a Store > Sign In option) and seeing if your balance changes ?

  • I have uninstalled and reinstalled iTunes Version 11.4.1 and still cannot access. I continue to get the Error 7 Windows Error 193 and now I am getting the Apple Mobile Device failed to start. I can't access any of my music I HAVE PURCHASED. What  to do?

    I have uninstalled and reinstalled iTunes Version 11.4.1 and still cannot access. I continue to get the Error 7 Windows Error 193 and now I am getting the Apple Mobile Device failed to start. I can't access any of my music I HAVE PURCHASED. What  to do?

    I am getting the same error message - error 7, Windows error 193 running iTunes on a PC Laptop (HP) which has been running iTunes previously for at least 2 years. 
    I followed the Apple support page and uninstalled (in order) all Apple programmes specified, rebooted, then re-installed.  Two additional errors crop up in re-installation, the first one is to do with Apple Mobile Support Device Services.  It seems that this might be rectified by plugging in said devices before finishing the re-install.  The second reads iTunesHelper was not installed correctly please re-install iTunes.  This persists. I cannot uninstall iTunesHelper using the Control Panel, but I can delete it using Windows.  However, after re-installing again, it still won't run and the original error comes back.  I've downloaded and uninstalled 15 times now and this is taking far too long to be acceptable. 

  • I have uninstsalled and reinstalled firefox but it will not launch 3.6.1

    I have uninstsalled and reinstalled firefox but it will not launch 3.6.1

    Many thanks.
    That suggests that another application has stashed old QuickTime componentry in your system files.
    So just in case we'll go looking for older QuickTime componentry in the most common locations for it to be stashed.
    First we'll need to change some view settings.
    In your Start menu, open Computer.
    In your Organise menu, select Folder Options.
    In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
    Click OK.
    Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
    Open the "Windows" folder.
    If you have a 32-bit version of Windows, open the "System32" folder.
    If you have a 64-bit version of Windows, open the "SysWOW64" folder.
    What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

Maybe you are looking for

  • How do I use a vi created with 5.0 on 8.5?

    I downloaded the latest drivers for an Agilent 33220A Function Generator and the vi's they provide are LabVIEW version 5.0.  How do I compile these vi's using LabVIEW 8.5?

  • Shell or perl script from OS command_Sender File Channel

    Hi All, I am trying to execute a perl script from the File Sender Channel(NFS), OS command Before Message Processing. The script works fine if i run it from the shell. But when PI calls the script,  the script does not get executed. The audit logs me

  • Getting error of Defining an internal table with header line, SELECT-OPTIO

    Hi all, i have a coding for my smart form,In this coding i have define an structure which being used,but when i execute it it give me error of Defining an internal table with header line, SELECT-OPTIONS, and RANGES is not allowed within a structure.E

  • Amavisd.conf vs. X-Spam-Status

    Hello, all-- I'm seeing lots of spam come through with a 'negative' score (X-Spam-Status: No, hits=-5.541, for example.) I have amavisd.conf configured to tag at 1.4 and kill at 5. 1.4 seems quite aggressive, and I wouldn't feel comfortable going muc

  • AuthD failed to get auth session

    I have a new installation of portal, but something is not working properly (probably our changes to authentication service schemas and organization-level changes). The message ("AuthD failed to get auth session") shows up in the amAuth log: ERROR: Au