My iTunes will not open and comes up withh error 10013, not sure why, clean comp and have tried reinst
My ITunes will not open and gives me error 10013, older macbook but just reformatted....HELP PLEASE!!!
i had problems like this back when i installed iTunes 7.2. I had to uninstall 7.2, go onto the internet and get iTunes 7.1. have no clue if it will work for u though.
Similar Messages
-
Pages is not saving document correctly. After saving the changes either do not appear or you can not open the file. The error is "not a valid format" I am in Pages '09 4.1 (923). I also use Parallels. Anyone having similar issues?
I'm not sure that Lion AutoSave feature apply to network servers.
I'm just sure that the Versions feature doesn't.
Yvan KOENIG (VALLAURIS, France) samedi 21 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
My iDisk is : http://public.me.com/koenigyvan -
I purchased a new laptop with windows 7 and i am using mozilla firefox as browser and i cannot get itunes to download at all. it will download to 99% with a few seconds remaining but will not complete the download. Any suggestions on what to try next as i have tried turning off firewalls etc. I have wiped the computer and reloaded everything again but still i cannot get itunes to load
I purchased a new laptop with windows 7 and i am using mozilla firefox as browser and i cannot get itunes to download at all. it will download to 99% with a few seconds remaining but will not complete the download. Any suggestions on what to try next as i have tried turning off firewalls etc. I have wiped the computer and reloaded everything again but still i cannot get itunes to load
-
its the same shit i asked before after i download the browser i get message can not open file what do i do to dwonload the browser
That message is usually a sign that you tried to roll back to an earlier build of iTunes, but occasionally I've seen it connected to a new upgrade. This technique should fix things.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
iTunes 10.6.0.40 will not open on Windows 7, no error messages come up. Have tried un-installing it and re-installing it many times. Please help.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2 -
Have a Macbook Pro and a 4th gen iPod Touch. Downloaded and install iOS 4.3.2 yesterday. Upgrade went without a hitch, but now iTunes on My Macbook Pro will not open. I get an error that says --The file "iTunes Library" cannot be read because it was created by a newer version of iTunes--. I am running iTunes 10.1. I searched for Updates to my MacBook Pro (running 10.6.7), but comes back saying no updates available. WHAT IS GOING ON??
Is your computer still authorized in the Store menu in iTunes?
iTunes Store: About authorization and deauthorization
When I changed to my new MacBookPro I had to authorize it although I used TimeMachine to transfer my settings and data.
Did you try to deselect Wi-Fi syncing and enable it again after that?
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
Did you already transfer your purchases and manually started a backup? -
I am trying to import developed images from LightRoom 5 Photoshop 6 for further editing. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, or you do not have necessary access permissions or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file. How do I fix this? I would greatly appreciate it if you would respond with terms and procedures that a computer ignorant user, such as me, will understand. Thanks.
Have you tried restoring the Preferences yet?
-
I am trying to import developed images from LightRoom 5 into Photoshop 6. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another program is using the file. Use the 'properties' command in the Windows Explorer to unlock the file'. This has not happened before. How do I change this?
Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
Mylenium -
IPhone 6 when held in landscape will not open text messages in landscape. Phone needs to be held upright and then back to landscape. The phone sits in landscape mode on a dock.
have the same issue even after upgrading to 8.1
-
Firefox 7 will not open, only shows up in processes, after Oct's Windows 7 update and force restart.
Been unable to get FF to open out side of it showing up in the processes. No browser window to even tinker with settings. Uninstalled the latest Windows updates, restarted and still won't open. Then uninstalled recent flash update since that updated as well. Still no go. Uninstalled FF, reboot, re-install FF, reboot, still nothing. I have tried opening in safe mode and FF will not open in safe mode either. Same again after turing off firewall and virus protection. Ran virus and spyware programs, nothing came up in those. Ran them again while in safe mode, just in case, and nothing found on my system.
The Windows and Adobe updates are the only things that have changed on my system since last restart 2 days ago.
No window, no nothing, only FF in the processes takin up 50% of my CPU and usin 30,000k in memory.
What else can I try to get my FF back?I have the same problem (and with Mozilla Thunderbird) running with Windows Vista OS. The non-opening problem was preceded by a long period where Firefox and other programs were taking absurdly long times, such as one minute, to open. Starting Windows in "safe mode with networking" solves the problems. Similarly, I just found that If I run msconfig.exe and select "diagnostic startup" then Firefox and Thunderbird both start and start up really fast (that is, when most services and startup programs are prevented from starting). However there is no network so they do not connect. I then turned on (in msconfig) enough processes to get networking running and Firefox and Thunderbird still start up really fast.
I am fairly certain there are no viruses on my computer, so the only other possibility is that some program/registry-entry is preventing the OS from working properly. The problem with windows that it is virtually impossible to find something like this, since the Windows OS has very weak self-diagnostics, and the registry is absurdly complicated with over half a million entries on my computer.
If you can do a "repair install" then this will probably fix the problem, but I do not think that Vista has this feature. Alternatively an upgrade of the OS might fix it, such as from Vista to Windows 7. -
Help! I have an iMac 24" OSX version 10.6.8. My iphoto is having problems. It will not open properly. All I get is the little wheel going around and around. My iphoto is: iphoto'11 version 9.2.3(629.52). What do I need to do to remedy this? I recently installed InstallMac. I don't want this on my computer. I don't know how to get it off. I'm afraid that is what scrogged my iphoto. Can anyone tell me how to correct this situation?
Re: iPhoto:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
I just restored my Mac HD from a time machine back-up and PS 4 Will not open. I get an error code 150:30. Any Idea what I should do ?
Photoshop's licensing information might have lost when you restored it to new HD. Re-install Photoshop CS4 and enter the same serial key for PS CS4 which you used before.
In case you need the download link for PS CS4, you can get it from here. Download CS4 products
Let me know in case you still get any issues.
~ Arpit -
My iphoto will not open correctly. All I get is the little wheel going around and around. What do I need to do to fix this? I would like to be able to see my photos again.
There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have. -
My MacBook Air, once pressed the power button, comes up with a file containing a question mark. I have tried re-starting it but this logo continues to appear and will not go. I cannot log onto my mac. Any suggestions as to what this is please?
You need to reinstall OS X:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
The System Preference:Desktop&Screensaver will not open. I get a rotating circle that never stop rotating. I have to do a Force Stop.
Quit System Preferences if it's running. In the Finder, hold down the option key and select
Go ▹ Library
from the menu bar. From the Library folder, delete the following item, if it exists:
Caches/com.apple.systempreferences
and move the following item to the Desktop:
Preferences/com.apple.desktop.plist
Launch System Preferences and test. If you still have the issue, put the item on the Desktop back where it came from and post again. Otherwise, delete the item.
Maybe you are looking for
-
Exe build with database conn and report generation vi's?
I tried to build an .exe and learned the hard way that there are many things needed to be included for this to work. As is now my program is not working. I wanted to get a list of necessary steps to make a successful build. Please correct me if I a
-
Function module with UPDATE TASK
All, Have a look at the below code. While debugging the control is not going inside the function module called using <b>call function ...... in update task</b> statement. I believe the function module is not executed immediately, but is scheduled for
-
Merge Replication from 2012 SQL Server publisher/distributor to 2014 SQL Express subscriber
Hi, I'm having a question about which version to use when running SQL Merge Replication. In my test enviroment I have a SQL 2012 server running as Publisher and Distributor for my Merge Replication. I have now set up a test client running Win7 with S
-
SAP MM Agewise Stock Standard report in Days
<b>Dear MM Guys In sap mm Any standard report available for Agewise stock in days. format. pls tell me.. Regards Anandkumar.</b>
-
Thunderbird 31 - IMAP - leave copies of emails on server
Does anyone know how to set up Thunderbird 31 so that it leaves a copy of emails on the server? I'm using IMAP not POP. thx