My iTunes will restore my iPhone 4s but it won't turn on?
I dropped my iphone in the toliet a few days ago but luckily i quickly retrived it. i dried it off but didnt turn it off and i just put it in rice for over a day and i took it out today. my iphone wont turn on but when i connect it to itunes it did restore the phone but it still wont turn on? does anyone have an idea as to how to fix the phone?
It is clear liquid damage, nobody here can help you out with that. Putting the iPhone in raw rice to dry out can help but a positive result is never guaranteed. All anybody could suggest is to take it to an Apple Store to get a replacement for a fee.
Similar Messages
-
I just restored my iphone 4 but it won't leave the page asking me to restore it! Help please!
I just completely restored my iphone 4 but when I connect it to my laptop to manage my iphone and everything on it and sync it like usual, it only goes back to the page saying "Welcome to your new iphone! Would you like to set up your iphone as a new i phone or restore your information from a previous backup?", then gives me those 2 options. Why won't it go to any other step/page for me to sync or manage everything I have on it?! I even tried restoring it again to see if anything changes, but it just wont get past asking me to restore it! How do I get to the main page for my device???
This commonly happens when a phone has been hacked to unlock the phone from a specific arrier or the phone has been jailbroken. If your phone is in either of these categories you will have to look elsewhere for assistance.
-
I'm trying to restore my iPhone 4s but it won't except my iCloud password or id
Can someone please help?
I'm not sure what to tell you. With iOS 7, you'll need to provide the correct ID an password to proceed. You can try turning off Find My iPhone in Settings>iCloud. You will get the same prompt but perhaps it will accept your password this time.
-
ITunes will not recognize iPhone 3gs, but the phone charges. I've tried everything!
Hi
I've uninstalled and reinstalled iTunes.
I've tried a different USB port.
I've turned the phone off and on.
I've restarted the computer.
I've restarted the AMDS.
I have all the latest updates.
I'm using an iPhone 3GS on a Windows 7 laptop.
I have no other problems with the phone, and I did nothing to make it unrecognizable.
My computer recognizes it as a device, but iTunes doesn't.
iTunes does however recognize my iPod.
Please help me!!!Does you have tried everything include verifying the Apple Mobile Device USB Driver is installed, checking for 3rd party mobile phone software installed on your computer, and troubleshooting 3rd party security software?
-
When I plug my iPhone 4 into my laptop, a box pops up that says "The iPhone "iPhone" cannot be used because it requires iTunes version 11.1 or later. Go to www.itunes.com to download the latest version of iTunes."
I did so, but after downloading this software, I was told that it needed my MacBook Pro to have Version 10.6.8 or higher to run. My MacBook has Version 10.6.4, and I have no idea what updating it would require. I'd prefer to get my music from iTunes library to my phone without updating. If anyone knows how, please help.
Otherwise, could someone please tell me how to update my MacBook, how much it would cost, etc.?You'll have to update your OS on your Macbook.
Click on the black Apple logo at the top left of your Mac screen. Then click on Software Update.
support.apple.com/kb/ht1338 -
tried updating to ios 6 on iphone 4 has completely shut my phone off tells me i have to plug into itunes and restore to factory settings but will not let me do this?? need help???
Interceptor94 wrote:
What should I do short of restoring my phone to factory settings?
Nothing. The message means you MUST restore your phone to factory settings. There's no way around this . Your phone is in recovery mode. That's the only way to get it out. -
I tried to restore backup from itune to my new iphone 5s but have forgotten the password what should I do?
JennyGEL wrote:
I ... have forgotten the password what should I do?
Which password?
If you mean the passcode to your iPhone, here's the solution:
http://support.apple.com/kb/HT1212
If you mean the encryption password to your backup on your computer:
Warning: Make sure it's a password you will remember or write it down for safekeeping. If you encrypt an iPhone backup in iTunes and forget your password, you can't restore from backup and your data will be unrecoverable.
If you can't remember the password and want to start again, you must perform a full software restore and chooseset up as a new device when iTunes prompts you to select the backup from which to restore. -
iPod touch 5th gen will only sync to iTunes using an old lightning cable that it's falling apart, will charge with another cable but it won't sync to iTunes already try reset and restore same results..I also update everything using a Mac mini and latest iTunes version and 8.1.3 iOS on iPod touch any help will be really appreciated also try different computer like a macbook pro no luck.
See if yo missed anything here:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
and
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
ipad is connected to the computer however doesn't show up in the menu, I'm trying to restore it but am concerned that it will restore the iphone and not the ipad. any suggestions?
Hi vanover7,
It sounds as if when you connect your iPad to your computer it does not show up in iTunes, is that correct?
Please use the steps in this article to troubleshoot the issue -
iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L -
When iOS 6.0 updating my iPhone and connecting my iPhone to iTunes the only option I have, is to restore my iPhone. But ufortunately, I did not back up my iPhone before the updating. Is there any way I can avoid the restoring process?
Once the Device is asking to be Restored with iTunes... it is too late to save anything...
To minimise loss... Connect to iTunes on the computer you Usually Sync with and Restore from the most recent Backup...
http://support.apple.com/kb/HT1414
Restore from Backup
http://support.apple.com/kb/ht1766 -
Trying to restore my iphone 5c, but it says i have to turn off the 'find my phone' option in icloud. when i try, it brings up the wrong apple id. I reset it under itunes & app store in settings but still not working...frustrated!
Open iTunes on computer, connect iPhone to computer with USB Cable, hold both home and power buttons for about 20 seconds until iTunes recognizes iPhone in Recovery Mode, click Restore button of iTunes on computer.
-
i was restore my iphone 5 but last time itune show error (-1) so how can i solve this problem?
Error -1 indicates a serious hardware failure.
Try restoring the device again, try on a different computer. If the issue continues, take the device to Apple for evaluation and possible replacement. -
i restore my iphone 3gs but after that iTunes show a message there is a problem with your iPhone, help me please
Yes. Talk to whoever replaced the battery. Sounds like they broke something.
-
i wana restore my iphone 3g but when i restore it with itunes after some time is say '' iphone could not restored unknow error 1015 '' help me please
99% because your iPhone was hacked/jailbroken. We cannot help you, see terms of use.
Error 1015: This error is typically caused by attempts to downgrade the software for an iPhone, iPad, or iPod touch. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version isn't supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you're now trying to restore to an authorized, default state. -
I tried to restore my iphone 5s but it shut off during the restore and wont turn back on I tried reseting it with the home and power button but it doesnt work and I tried connecting it to itunes but it doesnt show up
Did you try to connect in recovery mode, as explained in this article?
If you can't update or restore your iOS device
If this does not work, get it checked by an Authorized Apple Service Provider or by Apple:
iPhone - Contact Support - Apple Support
Maybe you are looking for
-
Drill Down error with more than one dimension
Hello I'm using AWM 10.2.0.3.0A with Oracle 10.2.0.1.0 and i can't perform drill down operation when i have more than one dimension in the same axis. That is, when i have two dimensions, a can't perform drill down on both dimenions at the same time,
-
My I-Pod Touch contains an audible book, which I can not remove. It does not appear in I-Tunes when I try to sync, and this audio book takes up so much memory that I can't sync my i-Pod. How can I remove this from my i-pod? Thanks
-
I'm new to Flash and an amateur at making pages so keep it simple for stupid me. I have a html page that has a space on it that I would like to show a rotating image ( like a slide show a image would fade in and then be replaced by another, maybe in
-
hi am trying to develop a plug in on eclipse and i want to get the path for the class(project) that eclipse editor(on focus) is currently opining ...???!!! is there anyway to do this ??? actually i believe there is cause many plugins on eclipse uses
-
Hi All, I want to read a binary file which has double data. The first byte is an unsigned byte. I have tried using DataInputStream readUnsignedByte method. But then how to convert this value into double. int hdop = _data.readUnsignedByte();