My itunes won't open, it keeps saying that it cannot open as some files are missing. It has been like it for months and I can't get it working

Please help, I keep  removing and installing itunes but I still can't open it. Every now and then it will let me in but I can't do everything that I should be able to do.

I gave my two cents on another forum post, but will also place it here.  I figure why not, more eyes and all that.
Not sure if you solved your problem, you probably did since there is no follow-up.  But since I am in the midst of this quaundary, I'll give you a little heads up.  I think 13010 might be when iTunes can't find a library.  This does not mean your music is missing as you can have your media folder (containing all your actual iTunes files) and your library folder (the database that organizes all of your media files) in separate locations.   I recently got a new computer and first pointed to the new media location and then also iTunes started to download the itunes library but for some reason deemed it damaged and may have removed it from it's original location as it can no longer find the library folder in that location.
My problem is this, no other forum post has helped me much in regards to the 13010 error.  I removed the extras and genius files and still got the 13010 error.  I reinstalled iTunes and still the 13010 error.  At this point I am willing to scrap everything just to get a factory fresh version of iTunes and then attempt to import all my old media into it and then reorganize it myself.  But as far as I know, there is no easy way to do this.

Similar Messages

  • After updating to mavericks on my MacBook, the screen keeps saying "setting up your mac." It has been like this for hours! How can I make it go faster?

    After updating to mavericks on my MacBook, the screen keeps saying "setting up your mac." It has been like this for hours! How can I make it go faster? It's has been like this for 4 hrs.

    I don't think your mac is setting up. It's stuck.
    I would:
    hold the power button until it shuts down
    unplug all peripherals
    do a safe boot (restart and hold down the shift key until you see the apple logo).
    If it starts up in a safe boot, then you can try restarting with a normal boot.
    If it does not start with a normal boot, then you probably have some incompatible third party software. Likely culprits are:
    MacKeeper
    CleanMyMac
    third-party antivirus software
    any other "cleaning" or "optimizing" or similar third party "utilities".
    A good place to start would be to uninstall any of those (while in safe mode) and then restart.

  • Can't open up Itunes (its been like this for months, and no response.)

    I can not access itunes. Whenever I click on it it says:
    "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience.
    If you were in the middle of something, the information you were working on might be lost."
    It has been like this for a while. One day itunes just stopped working. Help from Apple would be nice.
    E machine Windows XP
    E machine   Windows XP  

    we're still on track.
    Error Number: 0x80040707
    Description: DLL function call crash: QtinstallCode.QuicktimePostinstallProc
    that's a known complication of a broken QuickTime. in this context, it usually means the installation configuration information of the QuickTime has been compromised.
    here's what we'll try first.
    Download and install the Windows Installer CleanUp utility. then use it to clear any existing QuickTime installation configuration information from your PC:
    Description of the Windows Installer CleanUp Utility
    next use the QuickTime component of the complete uninstall instructions in the following document as a guide to a manual removal of leftover QuickTime program files and folders.
    Trouble installing iPod, iTunes, or QuickTime software in Windows
    once we've got all the existing QuickTime scraped away, let's try another careful standalone QT 7.0.4 reinstall.
    does it go through properly this time? if so, does your itunes launch properly again?
    love, b

  • During installation of iTunes appears an error message: Itunes cannot run because some files are missing. What can I do?

    Recently I received an iPad2 as a gift. I had iTunes because an iPod I had. First I put some productivity apps through my computer. Then I bought some other games apps through WiFi. then when I try to synchronize, I lost my productivity apps and just keep those buy on WiFi. Now I try to install iTunes again, and what I received at the end is a message that tells me "iTunes cannot run because some of its required files are missing. Please reinstall iTunes".
    I did it a couple of times. Same result. One of this times, I also retired those programs recommended on help page: iTunes, QuickTime, Bonjour, Apple Mobile, etc. (in the order indicated)
    Your help will be appreciated.

    same issues here... Using windows 7... I can't install none of the 3 soft. No Safari... No Quicktime... No Itunes... Running 32 bit windows... Error messages "Error 7" and some other error messages durint install...  Any help will be appreciated... Thanks

  • On opening after  "sleep" I get a pop up saying "disc was not ejected properly etc. Going on for months! How can I get rid of it, please?  Peter

    On awakening iMac after sleep, I get a pop up saying "The disc was not ejected properly....." etc. Presumably this was a disc of photos or a slideshow I had put onto a disc at some time past.  This has been going on for months. I have inserted and ejected thru Finder all the discs I have, and still it persists. Any ideas of how to get rid of it, please?

    phillashby, if you just upgraded ML to 10.8.5 then the problem may be caused by a bug in the upgrade.  If you look around the forum other people are having the same problem after going to 10.8.5
    I recently upgraded to OS 10.8.5 and now when my iMac (late 2012) wakes from sleep I get the error mesage that my Lacie external thunderbolt raid drive has been ejected improperly. Then it reconnects right away. I will stay away from the sleep mode for the moment.

  • When trying to import photos with iPhoto from photoshop.. won't let me keeps saying that the photos are already in the iPhoto library but they are not... need to fix this

    When trying to import photos with iPhoto from photoshop... won't let me keeps saying that the photos are already in the iPhoto library but they are not

    If you are using Photoshop from within iPhoto the following may help with the workflow.  However, we do need to know the answers to the questions posed by Terence and Larry to be able to help you.
    Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
    1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
    2 - double click on the thumbnail in iPhoto to open it in Photoshop.  When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
    3 - however, if you get the navigation window
    that indicates that  PS wants to save it as a PS formatted file.  You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    With Photoshop Elements  the Saving File preferences should be configured as shown:
    I also suggest the Maximize PSD File Compatabilty be set to Always.  In PSE’s General preference pane set the Color Picker to Apple as shown:
    Screenshots are from PSE 10
    Note 1:  to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
    Note 2:  editing a RAW file with either PSE or PS creates a new file which must be saved outside of iPhoto, i.e. the Desktop, and imported as a new photo into the iPhoto Library.

  • I've tried multiply times to update itunes 10.5 but it keeps saying that it can't find the file and i can't reinstall itunes because it will delete the 100 gigabites of info on it what can i do

    i've tried multiply times to update itunes 10.5 but it keeps saying that it can't find the file and i can't reinstall itunes because it will delete the 100 gigabites of info on it what can i do

    I've had all kinds of trouble keeping my iTunes software current over the past year, but have found the easiest way to remedy the issue is to simply download the latest version of iTunes as though I am a first-time user and then just install it into the directory my current version of iTunes is using. Doing this has allowed me to update my software without losing any of my media/data. Hope this helps! Best of luck!!!

  • I am trying to update my iTunes but it keeps saying that it cannot find the correct path...Any suggestions?

    I  am trying to update my iTunes but it keeps saying that it cannot find the correct path...Any suggestions?

    Hey b.elyse
    Check out the following article that will assist with removing iTunes. Make sure to follow the order to ensure that it removed properly.
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/ht1925
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • My iTunes account says that it cannot locate the original file for all of my songs.  My iPhone still has all the music and is able to play the songs, if I sync and backup my iphone will the songs be replaced with the empty copies from my itunes library?

    So basically I tried to back up my itunes library to my external hard drive and when I followed the instructions and then went to play a song it said Orginal file cannot be found. It said that for all of the songs. I'm not sure how to fix what I did, I already tried consolidating and all of that stuff and it didn't locate the files.  I'm guessing that I somehow deleted the original songs along the way.  I synced my iPhone without knowing what I did and surprisingly all of the music is still on my phone.  So now that I've completely screwed up my iTunes account, I need to know how to get all my music back onto my iTunes account and have that library only on my external hard drive, not my computer. Everything looks fine on my iTunes besides the fact that it cannot locate the files but what I'm afraid of is me syncing and backing up my iPhone and then being left with no music because it syncs to the empty songs.  How can I fix this? and if I can't fix my iTunes library is there anyway for me to still be able to backup my iphone and all the music on it, without erasing my music?

    Well I'm not sure if I correctly backed up my itunes library because when trying to open itunes from that back up it keeps saying original file not found. Okay this is going to sound confusing but bear with me.  I "backed up" my itunes, meaning I just dragged and dropped the iTunes folder into my external hardrive, and then I changed the destination on iTunes to open from my external hardrive.  It was working fine when I did that, however I did that just on my own, I didn't know about consolidating the files or any of that so I hadn't done that before copying the folder to my external hard drive. I can't remember but I'm pretty sure I deleted the iTunes folder after I had copied it to my external hardrive. So I did that and it was working fine, I was able to open my itunes with my external hardrive.  BUT yesterday I thought that I hadn't done it correctly because I didn't consolidate the files and all that, so I wanted to be more thorough and do that, I followed the steps to do that but when I did that I think it got all the files from my computer and not from my external hard drive so it basically didn't find anything on my computer because I had deleted them. And like an idiot, I replaced the iTunes folder on my external hard drive (the one I did correctly the first time), with the one I did wrong. So I believe I pretty much deleted all the music files from both my external hard drive and my computer. Please correct me if I'm wrong?
    I believe getting all my music back on my itunes is a lost cause. BUT I still have all my songs and stuff on my iPhone. My question is, if I plug my phone into my computer and sync it, will it erase all my songs from my phone? A little more info, my iTunes still has the names and stuff of all my songs, they just can't be played because the files are missing, my iPhone doesn't need to erase and sync when I plug in my phone because it's already synced to my computer. What I'm afraid of is when I plug in my phone to backup and sync, will it erase my music because it can't find the files on my computer or external hard drive anymore? Or will it just leave the songs because they're already there (on my phone) and only sync the new songs that I've downloaded? I just need to know is my iTunes still going to be functional as far as me being able to backup my phone?
    I have a lot of songs purchased from iTunes but a lot (like 60%) are from CDs that I no longer have. So re-downloading my music would only account for 40% of my library.

  • The iPad says disabled connect to iTunes. When connected it says please enter passcode. There is no places for me to enter a passcode. This has been like this for many DAYS...not hours. HELP!

    The iPad says disabled connect to iTunes. When connected to iTunes it says please enter passcode. There is no places for me to enter a passcode. This has been like this for many DAYS...not hours. HELP!

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Somehow my iTunes app has been put into the trash.  How can I get this and all of the stuff that was in it back to my Application folder?  I try to drag it out of trash, but it won't work.

    Somehow my iTunes app has been put into the trash.  How can I get this and all of the stuff that was in it back to my Application folder?  I try to drag it out of trash, but it won't work.

    Also, when I do try to drag it out of the Trash to put it back into Applications (on the Finder sidebar), it asks me to authenticate with the administration password.  I enter it, and then a window appears saying that I can't do that because I do not have permission to modify iTunes.  Please help.

  • I can't install itunes 11.0.4.4 and so I can't sync with IOS7 can't uninstall old Itunes error message saying some files are missing.  What to do?

    I am trying to install the latest version of Itunes so I can Sync with IOS7 but I keep getting an error message saying it can't dis-install the old version Missing itunes64 files.
    I tried to just un-install the old version but my computer tell me it can't because some files are missing.  I don't know how to find them or how to fixx my problem.  Can anyone help?
    Thanks

    I keep getting an error message saying it can't dis-install the old version Missing itunes64 files.
    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • I am trying to remove the older version of iTunes but an error message appears saying that it cannot find the path to 'iTunes64.msi", and I tried the search option to find it on my computer but no such luck. Please help me

    I am trying to remove the older version of iTunes but an error message appears saying that it cannot find the path to 'iTunes64.msi", and I tried the search option to find it on my computer but no such luck. Please help me

    Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.

  • Adobe Photoshop CS6 won't load on my macbook pro, says "Could not initialize Photoshop because the file was invalid (it has been deleted).

    Adobe Photoshop CS6 won't load on my macbook pro, says "Could not initialize Photoshop because the file was invalid (it has been deleted).

    Tried the preferences, they are not there, tried uninstalling and reinstalling, no love! Any help?

  • My iPhone says Searching in the top right hand side and has been like this for 2 days. Already had a replacement sim yesterday, still not working. Apple advised me to restore my phone by connecting to iTunes. When trying to do this it's not allowing

    My iPhone says Searching in the top right hand side and has been like this for 2 days. Already had a replacement sim yesterday, still not working. Apple advised me to restore my phone by connecting to iTunes. When trying to do this it's not allow

    Are you on a Windows PC? Do you have anti-virus software running on it? Here are some help articles for you to troubleshoot with:
    Resolve iOS update and restore errors
    Resolve iOS update and restore errors in iTunes

Maybe you are looking for

  • Question about resolution of project vs. res of material to be imported

    i am trying to put a project together that consists of still images (which i can prepare in any resolution) and some film material (avi and mov) which comes in the size of 640x480, square pixel aspect ratio. what do i have to do in order to set up a

  • Reg:Seeburger BIC Error

    Hello All, I was working on XML to EDIFACT Map in BIC Mapping Designer in seeburger,I am getting following Error while running the map: [Error:ID=3056;LEVEL=1] InhouseDocWriter setField() Error: Exception at create or setField(UNB.SG0.UNH:S009.0065)

  • I want to downgrae from v.4 to the previous version

    I upgraded to v.4 a few days ago and I hate it. I want to downgrade to the previous version, which I was very happy with. I'm pretty computer illiterate, do NOT enjoy experimenting with new features, configurations, etc. I would simply like to return

  • Doubt in Smartforms - how to display multiple  sale document no. in s

    Hi guru's,         I need sample code like print program and Smartform download  for multiple 'Vbeln' sale order document no. Please help me Rewards for helpful sample code. Regards, Rajiv Christopher.

  • Cannot open or use templates in OpenOffice & Star Office with FF7

    I have Open Office & Star Office downloaded but now with FF7 I cannot open the templates on either one so I cannot use them. There used to be a FF extension for Open Office but it doesn't work with FF7... Help