My itunes wont open it tells me that my itunes library was updated by a newer version on itunes but my software is uptodate any one else have this prob?
my itunes wont open it tells me that my itunes library was updated by a newer version on itunes but my software is uptodate any one else have this prob?
Look under your Start Menu for Apple Software Update, but before doing that, check the time and date on your computer that it's correct.
It's also saying the iTunes Library .XML file in your iTunes Folder file is new, for some reason, but your songs should be still in the iTunes Folder.
You can move the XML file out and restart iTunes and it shoudl creat another, you lose your playlists and have to import all your music again.
Similar Messages
-
My Itunes wont open - reading error "cannot be read because it was created by a newer verdion of itunes"
should i uninstall/ reinstal.
will i loose all my music nd playlists?This technique should work...
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
For some strange reason the songs in my library are multiplying. For example, I really only have 4,000 songs but every time I open itunes I have 6,8,10,000 songs! Any one else have this problem. How do I stop that from happening? I keep having to delete my library!
This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2 -
Transferred Itunes library from pc to new mac; however, when opening itunes on the new mac it reported that the library was created with a newer version of itunes and could not be opened. It asked if I wanted to download updates and I did. However, the new mac is up to date. Itunes won't open. What to do now? Any help would be appreciated.
Thanks
JimHello, Stephen.
Thank you for the question. You will need to rebuild your iTunes library file in order to open an older version of iTunes. Below, I have included the article that walks you through this process. Start with the section labeled Re-creating the iTunes Library file.
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/ht1451
Cheers,
Jason H. -
Since upgrading to OS 10.9 some labels in the iTunes Store are unreadable. I tried resetting the cache in prefs with no luck. Anyone else have this problem?
Strangely enough the pref file did not show up in the Preferences folder. I don't know what this means but it could be signifigant.
-
I recently transfered everything from my emac to another one but now when I try to open iTunes I get the window that states: The file "iTunes Library" cannot be read because it was created by a newer version of iTunes. The computer I transfered to had a bunch of files on it and I got full ownership of what was already there, so, how do I get to my iTunes library, I do have access as an administrator to the iTunes library (that works just fine) already there and I guess I must have had a newer version ofiTunes on my defunt eMac....
Tell us some version numbers please, of your Mac OS versions and iTunes versions on both computers (two eMacs yes?).
dlrobinson49 wrote:
I guess I must have had a newer version ofiTunes on my defunt eMac....
That is a pretty good guess.Try updating the second eMac's iTunes to at least the version that was on the first. -
itunes wont open i get "itunes libary.itl" can not be read because it was created by a newer version of itunes. tried deleting itunes an re installing. help
The same thing happened to me no one has replied to my comment either!! I need help!!
-
On my old iTunes sofwear iTune store would not open. I uninstalled iTunes and downloaded the new updates and installed it. Now I get a message that said " The file iTunes Libary.itl" cannot be read becouse it was created by a newer version of iTunes.I did everything it said to do inarticle HT1923 Removing and reinstalling iTunes, Quick Time, and other sofware components for Windows Vista or Windows 7. Now what?
Unless you've recently attempted to downgrade iTunes this is probably a sign of a corrupt library file. See Empty/corrupt library after upgrade/crash.
tt2 -
I cannot open iTunes. I get a message that says "The file iTunes library.itl cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?"
I downloaded it and it and I continue to get the same message.
How do I fix this? Thanks, DeeUpgrade iTunes to the latest version. It should be 10.5.3.
-
I get a message "The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes." Please advise what I need to do to get around this issue - at the moment iTunes wont open up!
Hi did you ever get a solution to this problem? Having the same issue myself!
-
Hate iTunes 11. Reverted to the old version. Now I get a msg when I click to open iTunes stating, "The file "iTunes Library.itl" cannot be read because it was created in a newer version of iTunes" and it will not open. HELP!! How can I revert the library as well?
I hate iTunes 11 too... and I also want to revert to previous version. But Apple seems to be so incredibly customer-friendly these days that is quite deliberately not publishing clear/simple revert instructions. I think it's a disgrace that Apple removed Cover Flow without warning people who are tempted to upgrade. Absolute disgrace. And now we're stuck with this piece of ..
-
While downloading the latest iTunes version, my computer turned off. When I opened iTunes, it says that "The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes" Help please
That message is usually a sign that you tried to roll back to an earlier build of iTunes, but occasionally I've seen it connected to a new upgrade. This technique should fix things.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
After getting error message 7, I un-installed all apple sw and installed iTunes, but it would not open. Received the message that iTunes Library cannot be read as it was created by a newer version of iTunes. What do I do now?
Hey I finally got an older vesion of itunes to work!!! 10.7 x64 for windows 7
After uninstalling all apple products even quicktime
I had to delete everything from (program files, and program files x64, program data,)
And all downloads from apple, and I went in to search deleted other stuff from apple, and itunes
But definently not my itunes library and Playlist
Down loaded 10.7 x64 for windows 7, but checked (do not start when done)
Then I emptied my recycling bin and restarted my PC
I ran geek tech tool box same as reg cure pro, also PC Tools registry cleaner, and CC Cleaner
Then I emptied my recycling bin and restarted my PC
And wallah... It finally works, and I Love the older version anyways.
Easier to download and transfer music!!!!! -
I just installed iTunes on my new laptop. When I click on the desktop icon I receive a pop up that says "The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes". I have no idea what this means or what to do about it. I can't even find a file on my computer like the one referred to in the pop up. I am currently considering keeping my old laptop if it is the only way for me to continue to access iTunes. What should I do to fix this?
What version of iTunes are you using? An .itl file is something that Windows uses, or very old versions of iTunes on Mac. The library file on Macs is now .xml and has been since late iTunes 4.
Is iTunes running ok without any problems after you OK that message? If it is, then you may be able to ignore it if you can't account for why you're getting it. But make sure you take backups in case something happens in the future. -
I receive the message: The file "iTunes library.itl"cannot be read because it was created by a newer version of itunes. I do not know exactly what this means. I have Windows 7 on my computer and was able access itunes until just recently. I have tried uninstalling and reinstalling itunes multiple times and that does not work. Sometimes I can get in when immediately after installing, but then if I close it, i cannot get back in. Now, i can't get in at all.
That message is usually a sign that you tried to roll back to an earlier build of iTunes, but occasionally I've seen it connected to a new upgrade. This technique should fix things.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2
Maybe you are looking for
-
Itunes 10.5.3 update radio issue.
Just had a software update notification for iTunes with the new iBooks stuff in, so I updated it, like you do, and now it continually tries to update radio lists, and keeps throwing up error messages, stopping me from usingTunes. Clicking the X in th
-
Hello guys, again here :) Well, i have a tile list which renders almost 50-60 items. I want to give a toolbar, which will be used to customize all the item renders at the same time. like, change picture border and it will change the border in all the
-
Airport Express and network printer
I purchased a new Airport Express with 802.11n and I can configure it properly with no issues with basic functionality. Connecting my HP Photosmart printer via USB cable also works fine. However, connecting it via ethernet connection is problematic.
-
Edit Google Cal event in iCal without changing the original?
I'd like to be able to edit an event or delete it on my iCal without touching the original copy. Is this possible?
-
Calling BAPI only ones and receiving all values
HI all, I am having a BAPI and I want to receive all the values from the BAPI at the first time.I am having two tables table1 and table2. These tables are inside a Tab(tab strip). When i click the Tab strip the BAPI fills the first table table1 and