My key pad not working

Hi since i up date the last soft wire my key paid button not working properly especially P button and number 0 doesn't work anymore so could you give me solution pls ASP

I have asked our Hosts to move this to Using iPhone where it may get faster response - ÇÇÇ

Similar Messages

HP mini5101; Key pad not working on start up, hence can not log in??

Hi, I have been trying to log on the HP mini5101 but the key pad does not work/respond. I've tried re-start, shut down and on the notebook again for a few times and still unsuccessful. Very frustrating!!
Appreciate if someone could help/assist and enlighten me. I really like to know why and how to make the key pad work again??
Thank you.
Pam Yap

Hello drink1208,
Thanks for posting on the HP Forums!
I understand a USB ports are not working on your computer. To assist you properly, I do require the following information:
1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your notebook product number
2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
3. Does this occur on certain programs, or all programs?
4. Have you installed any new software or drivers on this computer, before the issue appeared?
Additionally, if the issue just began occurring, I would perform a system restore. I want you to bring the computer back to the earliest restore point possible, in an attempt to dodge whatever caused the issue. Here is a document on how to perform a System Restore: System Restore
Mario
I worked on behalf of HP.

HP Pavilion g6-2320tx Notebook PC key pad not working

HP Pavilion g6-2320tx Notebook PC keypad do not work.

Hi,
Try the following.
Shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to see if this will launch the Start-up Menu - if it does, select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Key pad not working.

I have been using my 8310 in the leather pouch provided and now the letters Z,C,N,M and the space bar will not work. The unit is less than a year old and I was using a Blackberry product. I will be looking to get my hands on a (Bold) 9000 series when it comes out but dont know when that will be. Can anyone provide me with and information on the above issues?
Message Edited by James-L on 07-15-2008 01:48 PM

Welcme to the Frums
I too have a CURVE 8330 and have had it several months. I love it. I am thankful I haven't had these button sticking problems though. I hate that you guys have had trouble. Any chance they are still under warranty for you to change?
Nurse-Berry
Follow NurseBerry08 on Twitter

HELP! Track pad and key pad not working at all!!!

My phone was working fine and then I woke up to not being able to use the track pad and keyboard. It was stuck on password sign in and when I plugged the phone in woke automatically go to bedside mode. Spent hours on the phone with my carrier just to make it worse. ANY ideas???

Hi and Welcome to the Community!
So that we can avoid redundancy, please list exactly everything that your carrier had you do, and the specific results of each thing...
I'm a bit surprised that they fobbed you off, though...you see, you pay them for 100% of your service and 100% of your formal support. Right now, they seem to be delivering neither to you...
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Apple Keyboard with number pad the V key will not work

Apple Keyboard with number pad the V key will not work. Everyother key works but not the V. I have a MacBook Pro. Any suggestions?

Call AppleCare and get it replace if it's under warranty; otherwise, get a new one. They're only $49 USD.

Some keys are not working of my laptop lz801pa#

Hi
Recently I installed Windows 8.1 on my laptop (hp pavilion dv6 6115tx entertainment notebook) - lz801pa
Then I installed Visual studio 2013. everything was working perfectly then.
I guess when I changed keyboard option in visual studio to C# 2005, after that some of the keys stopped working.
I also reset that option to default, but the issue is still there.
Down & right arrow keys, right arrow key of num pad, 1-5,8,9,0 keys in the first row(up above qwerty keys row) are not working.
I am able to press indivisually tab & alt, but alt+tab combination is not able to use for switching between windows/apps.
Please help me.

Hello Rdmusale,
I understand that some of the keys are not working on your notebook computer, and I would be happy to assist you in this matter!
To correct the output of characters from your keyboard, I recommend following this document on Notebook Keyboard Troubleshooting (Windows 8). This should help correct how the keys appear on your keyboard.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

W700 Number pad Not working

W700 Windows 7 Pro x64
The full 10 key pad is working. It does not work if you try to use it to login but right when windows starts, it will work for about 3-4 keystrokes and then stop working. When it stops working, nothing. No arrow movement or numbers.

W701 - Win 7 / 64. My number pad is also not working (mostly). This has been the case since purchase, about one year ago (04-2011). It works as soon as Win 7 starts, but after a short time it no longer functions. However the Fn + NmLk keys do produce the short-cut to the calculator. I thought it had to do with sleep mode or hibernation, and if I waited, a new driver would be available, but this is yet to be the case. Perhaps it is a loose cable connection under the keyboard (?) - it remains a mystery. If I discover a solution I will post back here.

New aluminum keyboard for 24" iMac-10-key numbers not working??

I've got a new 24" intel aluminum iMac I've only had for 2 weeks.
Just today, the 10-key number pad stopped working & my programs froze up with no response from the might mouse plugged into the USB port on the keyboard.
The keyboard viewer shows all of the keys being recognized & Apple Hardware Test showed no issues.
I re-booted several times, did a permission repair & ran MacJanitor & when I rebooted again, I don't get any freeze-ups so far, but I do not have the function of the 10-key portion of my new aluminum iMac keyboard.
Very strange, but it does seem to be software related.
Something of interest: Only the 789-456+1230.enter keys are not working. Those above the 789 are working fine.
And to re-iterate, the keys are all being recognized by the keyboard viewer onscreen.
Any help would be greatly appreciated.
dave

I didn't end up taking it in - I created a new user account & there were no problems with my keyboard.
I transferred my home folder to the new account & started basically fresh.
I guess my old user account was corrupted or messed up somehow.
I have done this once before on my 1book g4 laptop & it also worked.
Thanks for the suggestion, I was getting ready to pack it up for a trip to the Apple Store & remembered to try this at the last minute!
Thanks again
dave

Fn key is not working on Apple compact wireless keyboard

The fn key is not working on my Apple compact wireless keyboard. Keyboard Viewer shows the keyboard (incorrectly) as having a number pad but no fn key. How do I fix this? I'm running OSX 10.5.8.

Unfortunately my old Mini does not have wireless capability. So I could not test the keyboard.
I did however find two preferences files. I suggest you find them and trash them.
Disconnect the keyboard first. Then find the two .plist files. They are:
com.apple.KeyboardViewerServer.plist - this is in Users / yourself / Library / Preferences.
The other is: com.apple.keyboardtype.plist - this is in Library (root level) / Preferences.
After trashing both these, it's a good idea to restart the computer, and then once again pair the keyboard.

Touch pad not working with HP G60 operating on Windows 7

I have a HP G60 operating on Windows 7 (not sure bit) and have problems with touch pad not working.
I was using touch pad and wireless mouse interchangeably for past year.
No recent changes made to system. Suddenly not work one evening. Have tried shutting down and left overnight which has not resolve problems. On one occasion, i was not even able to type and that resolved after re-starting computer.
There is a button between space bar and top of touch pad which is white. Even when i press and turn red, it has not changed situation. Therefore I have to use my wireless mouse to operate for the moment.
Would appreciate any advice about what is the problem and ways to resolve it.
Thanks a lot!
Mo

Hi,
The numbers are fine
Try the following.
First, ensure the Touchpad is switched on ( the light between the Touchpad and the Spacebar should be white ), then download the latest Synaptics driver installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp44501-45000/sp44940.exe
Next, open windows Control Panel, open Programs and Features, right click the entry 'Synaptics Pointing Device Driver' and select Uninstall.
When this has completed, shut down the notebook, remove any external devices connected to the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
When windows has fully reloaded - it will automatically load a generic driver for the Touchpad, but just let it do this. Then open your Downloads folder, right click the Synaptics installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

CURVE 8520 - KEYS ARE NOT WORKING

Need assistance to guide as the qwerty pad, navigation and other keys are not working. when conncting the phone to laptop, the alarm confirmation appears and cannot cancel or open other file.
already restart the phone and removed the memory card but still problem occurs.
Solved!
Go to Solution.

Perfom a back up from your device information , the make an update if your device dont have any update make a force detection or just a reset of factory settings if the error continues you need a warranty replacement.
Back up steps:
For a backup of the data on a BlackBerry smartphone, complete the following steps:
    Click on Device from the upper left-hand corner of the BlackBerry Desktop Software and select Back up from the drop-down list, or simply click Back Up Now from the main screen of the BlackBerry Desktop Software.
    Mark the appropriate customization level ( Full, Quick, Custom).
    If your smartphone includes built-in media storage and you want to back up data that is stored there, select the Files saved on my built-in media storage check box.
    Input a file name if desired, or leave the default text.
    Leave the Encrypt backup file unchecked.
    Select Back up.
Update steps:
    Connect the smartphone to the computer.
    On the home screen of the BlackBerry Desktop Software, click Update.
        To download an update, click Get update.
        To view other available versions of the BlackBerry Device Software, click View other versions. If applicable, click another version. Click Install.
    Do any of the following:
        To keep a backup file of your smartphone data and settings, select the Back up your device data checkbox. This backup file is restored to the smartphone after the update is complete. If the data is not backed up, the smartphone data, settings, and email messages are deleted from the smartphone after the update is installed.
        To encrypt the backup data, click Encrypt backup file.
        Select the Keep me subscribed to email notifications checkbox to receive email updates when new versions of the BlackBerry Device Software become available.
    Click Install update.
When the confirmation message that the update is complete is displayed, the BlackBerry smartphone may be disconnected.
Force Detection :
Remove the battery from the back of the BlackBerry smartphone.
Connect the BlackBerry smartphone to the computer using a USB cable.
Once prompted to Retry, Update or Cancel, click Update. If available updates are found Desktop Manager will prompt you to Get Update, Update Later or View other versions
Click Get Update to install the recommended software version or View other Versions to manually select the version you wish to install and click Install.
In the Update Options screen there is the option to enter the email address to be notified in future when there may be new software versions available.
    fill in the checkbox and enter the email address in the text field to receive email notifications
    uncheck the checkbox and leave the text field blank to not receive updates.
Reinsert the Battery which was removed in step 1
Click Install Update
Reset Factory Settings steps:
    In the top right corner of the BlackBerry Desktop Software, click on the ? in the top right hand corner of the BlackBerry Desktop Software.
    Click Support Resources
    Then Support Tools
    Click the Reset button under the heading Reset to Factory Settings.
Any question let me know.!

Keys are not working

my keys on my mac book pro are not working properly. the shift and control keys are not working and do not show up in the viewer.
any helpful hints on how to get them working?

seems like various different keyboard issues, requiring different solutions.
however, for what it is worth, I DID resolve a related issue. In my case, the problem was definitely SOFTWARE related. "s" key stopped working, as well as a couple of keys on "number pad", including "enter" key, etc.
when i did time machine backup and transferred to new computer, i found that the "s" key (and others) STILL NOT WORKING on new computer!
i should also note that, before the transfer, i had also tried different keyboards on old computer and had same problem: no "s" key, etc.
this made me think problem had to do with that old computer, since same problem with different keyboards. but, after problem remained after transfer, it was pretty obvious that I had transferred the problem to the new computer, which made me conclude the problem was SOFTWARE and NOT HARDWARE.
well, first thing i always try (as IT guy) is to set up and test new Apple user account. when i set up a new test account (administrator; not standard or guest, etc.), I noticed that the "s" key was WORKING (and I assume others - new keyboard was NOT extended; so no number pad to test those keys). When I logged back into the old account, once again, the "s" key not working.
i duplicated all of this testing on the new computer; so THE PROBLEM WAS DEFINITELY A SOFTWARE PROBLEM WITH THAT PARTICULAR USER ACCOUNT. I guess somehow an ACCOUNT can be specifically affected (corrupted) in some way that other accounts are NOT so affected.
Doubt if this would apply in case of UNRESPONSIVE KEYBOARD (which seems to usually be HARDWARE related); but in the case where only SELECTED KEYS are not working, you might want to simply try setting up a NEW USER ACCOUNT.
Unfortunately, Apple has NO easy way to transfer files between accounts. But, of course, I would likely NOT want to do that anyway, in this case, as I might end up transferring software problem to the new account. Therefore I DID have a bit of work to do, in terms of tranferring PICTURES and MUSIC to the new account from the old, etc. But that seemed minor compared to working on a computer with certain keys not functioning!

HP Pavilion Volume Touch-Pad NOT WORKING | NO SOUND HELP

HP Pavilion Volume Touch-Pad NOT WORKING
I have an HP Pavilion dv3t - 2000, Windows Vista computer.
SOMEONE DID ALREADY HELP ME HERE WITH THIS PROBLEM BUT THEY STOPPED RESPONDING | Please check that link out!
The volume touchpad above the keyboard is not working properly (There is no sound coming out of the speakers or the headphone jack) , If you touch the megaphone part of the touchpad above the keyboard then it stays red, however the sound icon on the taskbar changes from mute to unmuted when you touch the red megaphone. The volume slider on the touchpad works suprisingly.
I don't know if I uninstalled something or what but I need this problem fixed!
Thanks!

Hi,
Shut down the notebook, unplug the AC Adapter and remove the battery.
Follow the procedure detailed on Page 63 of your Maintenance & Service Guide to remove the RTC battery. Hold down the power button for 30 seconds.
Leave the notebook for 10 minutes and then re-insert the RTC battery, re-assemble and replace the cover, insert the battery, plug in the AC Adapter and start the notebook. Tap away at f10 as soon as you start the notebook to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
If you still have no audio and the installer you downloaded previously still doesn't detect the Hardware, it would start to look like a Hardware failure, but to try and rule out any further software cause, try the following.
Follow the procedure on the link below to create a bootable Ubuntu CD and follow the steps in Part 3 to 'Try it' to see if this OS will run. The 'Try it' option runs the OS from the CD without the need to install on your HDD. If this runs Ok ( it will be slow running from a CD ) and you still have no audio output, this would tend to confirm a Hardware issue.
http://www.ubuntu.com/desktop/get-ubuntu/download
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Keyboard number pad not working....

I have installed Leopard, and now my number pad won't work. I have looked under System Preferences, and found nothing wrong there. I have the aluminum keyboard that is wired. Anyone have any ideas? Thanks...

I am having the same problem on my 24" imac (late 2006).
My keyboard is a wireless mac keyoard.
All the number keys (0-9), as well as the decimal key do not work. When trying to use these keys in TextEdit or TextWrangler, they actually cause the keyboard to appear to lock up (command-option-esc clears, with no need to actually force-quit anything). The F-keys also appear to continue working.

My key pad not working

Similar Messages

Maybe you are looking for