My key scrambler add-on doesn't work anymore in Firefox v21!!!

my key scrambler worked in v19 ok but not when auto upgrade occurred yesterday.
It doesn't even appear in add-on list.
I searched for it using Tools-Add-ons menus but key scrambler isn't even there.
Is this part of US Government NSA Surveillance??
Right now I'm just going to use Google Chrome browser as it works perfectly there!!!!

Is your key scrambler a plugin? Check out this article about a change in where Firefox looks for plugins that can cause a few plugins to disappear.
[[Windows Media or other plugins stopped working after Firefox update]]
Does that solve it?

Similar Messages

I had an old iPod classic 40 gb, now it doesn't work anymore; I have to add a new one (iPod classic 60 gb) to my iTunes: could you tell me which is the right procedure?

I had an old iPod classic 40 gb, now it doesn't work anymore; have to add another one (iPod classic 60 gb) to my iTunes (windows XP), which is the right procedure?

Plug it in and follow the onscreen directions. That you previously had an iPod doesn't matter.
(58889)

Last week, I had no problems streaming my MacBook Pro to my sony Bravia with a logix hdmi cable. I came back from holidays and now it doesn't work anymore. What settings should my computer be on and what settings should my tv be on?

Last week, I had no problems streaming my MacBook Pro to my sony Bravia with a logix hdmi cable. I came back from holidays and now it doesn't work anymore. What settings should my computer be on and what settings should my tv be on?

TarahCurrie Sep 10, 2014 3:48 PM
Restore From Time Machine Backup
Reinstall OS X
Get Help Online
Disk Utility
MacBook Pro, Mac OS X (10.5.8)
You are running 10.5.8
Did you try booting off your Install disk holding the c key down. From here you can get to the drop down menu just a few clicks in (you are not going to install) and run the Disk Utility>Repair Disk. See if it will let you do this.

Time Machine Just Doesn't Work Anymore

I was a happy Time Machine (with Time Capsule) user for months. But it just doesn't work anymore. It takes longer than an hour to do every hourly backup so it is backing up 24 hours a day. It finds hundreds of thousands of files changed every hour and tries to back them up. Finders says only tens of files have been modified all of today. I have tried rebuilding my spotlight indexes, repairing my Time Capsule with Disk Utility and starting over with a brand new backup. But it just backs up hundreds of thousands of files every hour. So I am turning off Time capsule since it is clearly broken. If anyone has any suggestions at all I would welcome them.

Marcia,
Consider the following, it might give you some ideas:
Time Machine performs backups at the file level. If a single bit in a large file is changed, the WHOLE file is backed up again. This is a problem for programs that save data to monolithic virtual disk files that are modified frequently. These include Parallels, VMware Fusion, Aperture vaults, or the databases that Entourage and Thunderbird create. These should be excluded from backup using the Time Machine Preference Exclusion list. You will, however, need to backup these files manually to another external disk.
One poster observed regarding Photoshop: “If you find yourself working with large files, you may discover that TM is suddenly backing up your scratch disk's temp files. This is useless, find out how to exclude these (I'm not actually sure here). Alternatively, turn off TM whilst you work in Photoshop.” (http://discussions.apple.com/thread.jspa?threadID=1209412)
If you do a lot of movie editing, unless these files are excluded, expect Time Machine to treat revised versions of a single movie as entirely new files.
If you frequently download software or video files that you only expect to keep for a short time, consider excluding the folder these are stored in from Time Machine backups.
If you have recently created a new disk image or burned a DVD, Time Machine will target these files for backup unless they are deleted or excluded from backup.
Installing new software, upgrading existing software, or updating Mac OS X system software can created major changes in the structure of your directories. Time Machine will backup every file that has changed since the installation.
Files or folders that are simply moved or renamed are counted as NEW files or folders. If you rename any file or folder, Time Machine will back up the ENTIRE file or folder again no matter how big or small it is.
George Schreyer describes this behavior: “If you should want to do some massive rearrangement of your disk, Time Machine will interpret the rearranged files as new files and back them up again in their new locations. Just renaming a folder will cause this to happen. This is OK if you've got lots of room on your backup disk. Eventually, Time Machine will thin those backups and the space consumed will be recovered. However, if you really want recover the space in the backup volume immediately, you can. To do this, bring a Finder window to the front and then click the Time Machine icon on the dock. This will activate the Time Machine user interface. Navigate back in time to where the old stuff exists and select it. Then pull down the "action" menu (the gear thing) and select "delete all backups" and the older stuff vanishes.” (http://www.girr.org/mac_stuff/backups.html)
*TechTool Pro Directory Protection*
This disk utility feature creates backup copies of your system directories. Obviously these directories are changing all the time. So, depending on how it is configured, these backup files will be changing as well which is interpreted by Time Machine as new data to backup. Excluding the folder these backups are stored in will eliminate this effect.
*Backups WAY Too Large*
If an initial full backup or subsequent incremental backup is tens or hundreds of Gigs larger than expected, check to see that all unwanted external hard disks are still excluded from Time Machine backups.
This includes the Time Machine backup drive ITSELF. Normally, Time Machine is set to exclude itself by default. But on rare occasions it can forget. When your backup begins, Time Machine mounts the backup on your desktop. (For Time Capsule users it appears as a white drive icon labeled something like “Backup of (your computer)”.) If, while it is mounted, it does not show up in the Time Machine Prefs “Do not back up” list, then Time Machine will attempt to back ITSELF up. If it is not listed while the drive is mounted, then you need to add it to the list.
*FileVault / Boot Camp / iDisk Syncing*
Note: Leopard has changed the way it deals with FileVault disk images, so it is not necessary to exclude your Home folder if you have FileVault activated. Additionally, Time Machine ignores Boot Camp partitions as the manner in which they are formatted is incompatible. Finally, if you have your iDisk Synced to your desktop, it is not necessary to exclude the disk image file it creates as that has been changed to a sparsebundle as well in Leopard.
Let us know if any of this helps.
Cheers!

Sound doesn't work(only in firefox). why? sound doesn't work(only in firefox). why? (adobe flash player doesn't work even thought it's installed)

sound doesn't work (only in firefox). adobe flash player doesn't work correctly, thought it's installed. can't solve the problem. i need Sound.
== This happened ==
Every time Firefox opened
== don't know

What does the Adobe test page say?
http://www.adobe.com/software/flash/about/
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")
See also [[No sound in Firefox]] and [[Video or audio does not play]]

IMac freezes & Time Machine doesn't work anymore

Hello,
For several days now my trusty iMac (two years old) keeps freezing without a recognizable pattern. Programs like iTunes, iPhoto or maybe even the Finder just stop working and display only the rotating ball - the only thing left to do for me after that is to manually terminate that process or (in the case of the Finder) to restart the whole iMac. I'm really clueless as to where this behaviour suddenly comes from, up until about a week ago the iMac worked perfectly. And now something like this happens every single time I start it.
Another thing that doesn't work anymore is Time Machine. My last automatic backup is from September 17th. After that it just stopped working. Every time an automatic or manual backup is initiated it just says "Searching for backup volume" but doesn't find it, even after several hours of looking. The Time Capsule itself works perfectly, no errors whatsoever.
My iMac is up-to-date, I also already ran the disgnostics of the hard drive program - everything seems to be fine. Can anyone help me?
Thank you in advance,
Paul

When you next have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Reveal in Finder, doesn't work anymore

Using iMac 27" 3.4 GHz Intel Core i7.
Since I have upgrade to Mountain Lion 10.8.2 and iPhoto 9.4.1 and 9.4.2, using menu «Reveal in Finder» (original or modified photo) doesn't work anymore.
This menu was working fine beforehand.
Could it be related with the last upgraded version of Java (version 7, upgrade 9) ?
Thanks for your advices.

Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT

Pinching in Safari doesn't work anymore..

In ML it was possible to pinch and get an overview of your tabs.
As I discovered recently this doesn't work anymore.
Pinching to get tab overview doesn''t work anymore and pinching to zoom in/out either.
Any solutions or thoughts on this issue? Perhaps involving the recent Safari update in ML?

Please read this whole message before doing anything. This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it. Step 1 The purpose of this step is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.” While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin. Test while logged in as Guest. Same problem? After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it. *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing. Step 2 The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Asha 311 notification LED doesn't work anymore aft...

after updating to the latest firmware 5.92 the notification LED between the call key and end key doesn't work anymore!!!
is there any solution to this problem???
this update seems more like downgrade rather than upgrade...

it not a problem .. it works perfectly..the thing u need to do is goto settings>llights>light effects to on . thats it ... if still it doesnt work then take ur phone to customer care

Keyboard of MacBook Pro doesn't work anymore

Hello to everybody!
I hope, that somebody out there can help me as fast as possible.
I spread a coffee over my 1-year old MacBook Pro keyboard and as fast as I could I turned it head down, so that the coffee could come out of the keyboard. I cleaned the keyboard and tried it out, if everything still works... in the begining it worked, but then some letters begun to not work anymore or I couldn't write some big letters anymore... so I desided to put my extern keyboard from an other computer on my MacBook Pro so I could at least write with this extern keyboard. But now as I wanted to put this extern keyboard away my MacBook Pro keyboard doesn't work anymore at all. Now I have the question, if I need to give in somewhere an order on my laptop that I want to use again the laptopkeyboard instead of the extern-one? The problem is, that normaly with windows I was used to just put the extern keyboard away and my computer realized on his own that it needs to use the own keyboard again, but with the MacBook Pro this doesn't work, so I'm a little bit confused and don't know, if my keyboard is now totaly damaged or if I just need some computer-language-order to tell my computer to use the normal keyboard again.
Please HELP me!!!
With best regards
Kati

i'm not suggesting it also, but it could work .
Btw, i will take off the keyboard from the MBP, disconnect the conector, so you can really give him a bath and shake it.
and, as it is dead, what do you have to loose ?
to take off a keyboard is quite easy, google will give you some tutorials on that.
another , may be the best method, is to clean it really, but it's like a pain in the a.s to dissassemble it.
I have done that on Apple Pro keyboard and apple Imac G3 rev 1 keyboard, and they are working as usual now, but it took me some hours, with a real good tutorial from sterpin.net(in french, useless for your topic)
so, a good bath in distillate water, with a lot of shaking, you can also press on keyboard keys, shake it, and so on, and 2 days under a august sun..
distillate is not expensive, and I will suggest it better than alcool, as it will not damage any of others components. Have in mind that it really need to be dry, so, 2 days are not so much, and, when the keyboard is under the sun , shake it too from time to time, just to be sure that some water can't make a "water bubble" in a place.
and give us some news.

Firefox installed the latest version. Now my google browser, history etc. doesn't work anymore. It doesn't respond. I can't run searches from the browser. youtube button is missing. I've tried opening firefox in safe mode but that doesn't work.

# Question
firefox installed automatically the latest version. Now my google browser, history etc. doesn't work anymore. It doesn't respond. I can't run searches from the browser. youtube button is missing. I've tried opening firefox in safe mode but that doesn't work

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
What happens if you open Firefox in Save mode?
*https://support.mozilla.com/kb/Safe+Mode
*Help > Restart with Add-ons Disabled

Satellite X200 20G - Fn keys pop-up screen doesn't appear anymore

Good morning, I hope you could help me on the following:
I have just noticed that when I place the cursor at the top of the screen, the pop-up screen with the functions keys no longer appears...
What did I do??? I don't think I have made any change to the settings.... I have installed the Vista SP1 but I couldn't tell you if the problem has just followed this installation (sorry). I usually don't use this functionality, I would even say that usually it annoys me a lot, but now that it doesn't work anymore, I miss it and I would say I discover a lot a usefulness to this feature...
How to get it back? That is the question.
I have looked in the Toshiba screens, I found Toshiba "Accessibility", but when I hit this icon I get a 'Toshiba Accessibility Error" pop-up screen telling: "This system can not use "Toshiba Accessibility" ".
Could you please advice?
Thank you
Guy

Hello *marina4000* , first of all thank you very much for coming into my post.
Second, I really think you have identified the area where the problem is.... I would have never looked into the "flashcards" area as to me this was related to memory cards...
You were right, I found in the Toshiba folder, Utilities, the Flashcards related topics. I hit "Restart Flash Cards" and the bar at the top of the screen appeared again, GREAT!....
But, as unfortunately there is a "but", the bar didn't appear at the next boot. I went back to the menu and found a line called "Settings for Flash Cards". It opened me a window where I found a box called "Disable all functions keys" but it was unchecked. I then checked this box, hit OK, then again uncheck it and clicked OK and the bar appeared, but again, at the next boot, it was not present...
It looks as if this is the right direction to dig into, but there is still something to fix so the bar is loaded at boot time.
I am hectic to read your next post!
(thank you again)
Guy

Why doesn't the "zoom in/out" via pinching the trackpad on my mac not work anymore with firefox? It worked before and still works with Safari.

why doesn't the "zoom in/out" feature by pinching the trackpad on my mac work anymore with firefox? It worked about a month ago, and still works on Safari.

Some gestures have been removed in Firefox 4 and later.
You can restore the zoom feature by changing the values of the related prefs on the about:config page.
browser.gesture.pinch.in -> cmd_fullZoomReduce
browser.gesture.pinch.in.shift -> cmd_fullZoomReset
browser.gesture.pinch.out -> cmd_fullZoomEnlarge
browser.gesture.pinch.out.shift -> cmd_fullZoomReset
browser.gesture.pinch.latched -> false
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold(user set).
*Preferences can be reset to the default or changed via the right-click context menu.

Networkmanager: mobile broadband doesn't work anymore

Hi,
I had setup a mobile broadband connection for my Nokia N900, connected via USB, with the NetworkManager (Gmome 3) two or three weeks ago. It worked perfect. Yeserday I tried the internet connection again - after a couple of rolling updates (e.g. actual NetworkManager 0.8.999-1). Now, the internet connection doesn't work anymore.
NetworkManager --no-daemon prints out the following:
NetworkManager[2944]: <info> Activation (ttyACM0) starting connection 'n900'
NetworkManager[2944]: <info> (ttyACM0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
NetworkManager[2944]: <info> Activation (ttyACM0) Stage 1 of 5 (Device Prepare) scheduled...
NetworkManager[2944]: <info> Activation (ttyACM0) Stage 1 of 5 (Device Prepare) started...
NetworkManager[2944]: <info> Activation (ttyACM0) Stage 1 of 5 (Device Prepare) complete.
NetworkManager[2944]: <warn> GSM modem enable failed: (32) Serial command timed out
NetworkManager[2944]: <info> (ttyACM0): device state change: prepare -> failed (reason 'modem-init-failed') [40 120 28]
NetworkManager[2944]: <warn> Activation (ttyACM0) failed.
NetworkManager[2944]: <info> (ttyACM0): device state change: failed -> disconnected (reason 'none') [120 30 0]
NetworkManager[2944]: <info> (ttyACM0): deactivating device (reason: 0).
It seems, the modem cannot be initialized
Using wvdial with the N900, the internet connection works still fine.
What is the problem? Any ideas?
Last edited by thesofty (2011-05-11 08:48:56)

Hi,
I managed to solve. Only the downgrade did not work. My solution:
1-Create the directory (if not existing)
/var/lock
2-Do not use package:
kdeplama-network-management
3-Use the package (downgrade)
extra/modemmanager 0.4-1 [instalado: 0.4-1]
http://arm.konnichi.com/2011/04/30/extr … pkg.tar.xz
4-Use the pachage (gnome)
network-manager-applet
5-Add dbus policy (If the file nm-applet.conf does not exist, create!)
https://bbs.archlinux.org/viewtopic.php … 39#p484839
[root@DESTINY log]# cat /etc/dbus-1/system.d/nm-applet.conf
<!DOCTYPE busconfig PUBLIC
"-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
"http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
<busconfig>

<policy user="root">
<allow own="org.freedesktop.NetworkManagerUserSettings"/>
<allow send_destination="org.freedesktop.NetworkManagerUserSettings"
send_interface="org.freedesktop.NetworkManagerSettings"/>
<allow send_destination="org.freedesktop.NetworkManagerUserSettings"
send_interface="org.freedesktop.NetworkManagerSettings.Connection"/>

<allow send_destination="org.freedesktop.NetworkManagerUserSettings"
send_interface="org.freedesktop.NetworkManagerSettings.Connection.Secrets"/>
</policy>

<policy group="network">
<allow own="org.freedesktop.NetworkManagerUserSettings"/>
<allow send_destination="org.freedesktop.NetworkManagerUserSettings"/>
<allow send_interface="org.freedesktop.NetworkManagerUserSettings"/>
<deny send_interface="org.freedesktop.NetworkManagerSetting.Secrets"/>
</policy>

<policy at_console="true">
<allow own="org.freedesktop.NetworkManagerUserSettings"/>
<allow send_destination="org.freedesktop.NetworkManagerUserSettings"
send_interface="org.freedesktop.NetworkManagerSettings"/>
<allow send_destination="org.freedesktop.NetworkManagerUserSettings"
send_interface="org.freedesktop.NetworkManagerSettings.Connection"/>
</policy>
<policy context="default">
<allow send_destination="org.freedesktop.NetworkManagerUserSettings"
send_interface="org.freedesktop.DBus.Introspectable"/>
</policy>
<limit name="max_replies_per_connection">512</limit>
</busconfig>
For information look this file
tail -f /var/log/message
tail -f /var/log/erros.log
Last edited by FZ (2011-05-15 00:34:07)

Choosing start volume with [alt] doesn't work anymore

Hi there,
On my MBP (15" early 2011). Normally I can choose from what volume I want to boot by pressing the [alt] key right after switching on my MBP. I have OSX Snow Leo and Win7 (64bit) installed.
However since I installed the latest software updates several days ago, including a firmware update for the thunderbolt connection, the choosing of the start volume by pressing [alt] on startup doesn't work anymore: I can move the mouse, but the two volumes don't appear on the screen. All I can do is to switch off. I can however boot under both, OSX and Win7 by choosing the "restart under Win7/OSX" option in the other system respectively.
I now found out, that it works perfectly fine again when I have my 27" Apple Cinema display (mini display, not thunderbolt) connected to my MBP. When it's not connected I am having the issue.
My guess is that the thunderbolt firmware update causes this.
Anyone got an idea? It's quite a pain in the *** that I always have to start one system at first to get in the other one at the moment.
Thx

Hi Fortuny,
thx for your answer! I just have reseted this NVRAM as described in the support page, and think I have done it right. It worked as said there, I just didn't have to set any time or resolution things afterwards, as it is written there that it might have to be.
Sadly it didn't seem to help. Anyway, I do have news:
When the two volumes didn't appear again on the startup screen, I sat back and thought about what the issue could be. After approximately one minute starin on the screen, suddenly the two volumes appeared! So in fact it DOES work, just it takes about a minute now when I don't have the cinema display attached.
Does this additional info say anything to the experts out there? It's still not solved, as it is rather inconvenient to wait a minute untill I can choose the startup volume.
Thx for any sugestions!

My key scrambler add-on doesn't work anymore in Firefox v21!!!

Similar Messages

Maybe you are looking for