My Keyboard doesn´t sound

I have activated the sound for my keyboard but it doesn´t sound. Of course I have checked that the volume is activated too.
Any idea about what´s happening?
Regards.

Do you get other notification sounds ? If not then have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

Similar Messages

  • Wifi goes on and off, backlit keyboard doesn't work and no sound since Lion  upgrade. I can get the wifi back by going into safe mode and re booting(someone suggested on here), but can't let computer die or turn off or have to do it again.

    My Wifi connection goes off if computer dies or shuts off, I can only make it work if I go into safe mode and reboot, it was just that, but now my keyboard doesn't light up like it's supposed to in low or no light and in system preferences it's like it doesn't exist.  Also, the sound doesn't work, I can't turn it up or down, it shows the sound icon grayed out and the anti symbol when I push F11 and F12, also it's like it doesn't exist in system preferences either. I have never had any problems with my MB Pro, I purchased in Feb. 2010. , but I upgraded to Lion last month, I haven't been using my laptop as much since I had an Ipad I given to me, so I think that's why I didn't notice these issues right away. What do I do? HELP!! Do I take it to Apple? I don't have the Apple care warranty, so will it be expensive for them to fix? Can I get my money back for Lion if I restore to Snow Leopard?

    Take it to an Apple store or AASP. How much it will cost will depend on their determination of the problems. To bad you didn't purchase extended AppleCare. No you don't get your money back for purchasing Lion.

  • How can I do Safe Boot if keyboard doesn't work

    iMac frozen at restart and keyboard doesn't work.  Appreciate any ideas on how I can reboot.

    Do you have a wired or wireless keyboard?  If you have a wireless one, using a wired one temporarily might help with this.  Otherewise, it sounds like you have a hardware failure, possibly hard drive or logic board.  In any case I would then recommend taking it in for a Diagnosis and service.

  • Buzz Player doesn't sound with IOS 07. Why?

    Buzz Player HD in mi Ipad 2 doesn't sound with new IOS 07.
    Do you Know why?
    Many Thanks from Spain

    First try this ... Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    If that didn't work, Do you have sounds in other apps, do you have keyboard clicks? If you don't, you have system sounds muted.
    If you lost sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the control center. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • HT1349 My iPhone keyboard doesn't click

    My IPhone 4 keyboard doesn't click.  I tried to check the settings (Sounds ➡ Keyboard Clicks) but it's ON. What should I do to make it work again?

    For everyone's information, the "silent switch" is on the top left side of the iPhone 4. I sometimes switch it on accidentally, and being new to iPhones, can't figure out what's wrong. The photo below shows the silent switch
    in the "on" position (orange / red bar showing above switch). Flick the switch up to turn the silent switch "off", then you should get your keyboard sounds back.

  • HP Pavillion dv3: Volume Icon on keyboard doesn't turn on when touched

    Hi guys!
    I have an HP Pavillion dv3 notebook and it has touch sensitive volume and wifi controls at the top of the keyboard. when you touch it and it turns blue, then it's on, when you touch it and it turns red, then its off.
    recently though, the volume control on my keyboard has been red, and even when I click it it's still red. it doesn't turn on. I checked the volumes on the screen and they're all alright, the sound card is fin, only problem is the volume button on the top of my keyboard doesn't turn on.
    how do I fix this? I can't hear any sounds because of this.
    thanks. God bless

    Hi undignified,
    Welcome to the HP Consumer Support Community!  It looks like this message was accidentally posted twice.  I am going to lock this instance of the thread and redirect everyone to this thread, or the one posted first.
    Thanks!
    Clicking the "Kudos star" to the left is a great way to say thanks!
    When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
    Rules of Participation

  • Keyboard doesn't appear in Messages+ on HTC M8

    My keyboard doesn't appear when I try to type a message in Messages+.  It appears when I type in the to box.  Instead of the keyboard I have a box lets you send gifts, photos, audio, etc.  I've tried restarting numerous times with no effect.  Has anyone else had this issue?  I like the verizon messaging app and don't want to use another, if possible. 

    shelsuz23,
    You've come to the right place for help! Being able to use the keyboard while in the message + app is definitely important.
    When did this issue start? Do you have the most current software version running on the phone http://www.verizonwireless.com/support/knowledge-base-95738/? Have you checked that the Verizon Messages+ application is updated to version 5.5.17 or later. Please go to the Google Playstore and update the Verizon Messages+ application and retest.
    JohnB_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Apple Wireless Keyboard doesn't work in Vista Ultmate?

    My Apple Wireless Keyboard doesn't work (not response) on Vista Ultmate but its works properly in Mac OS X 10.5.2...
    Should I install the driver in Mac OS first or update the keyboard firmware?
    Or install a driver for Windows Vista (I can't find any on web...)
    Please kindly help! Thanks a lot.

    this problem is fixed, but if anybody has an idea what happened, I would like to know.

  • My 17" Macbook Pro battery swelled up and kind of exploded. The apple genuis said it is still safe to use, that doesn't sound right.

    I am just kind of worried that it doesn't even fit. Do I need to kind of pop the expanded portion of the battery to get it to fit back in? The case of the battery has come apart and so to fit it back in I would have to press it back together. The battery is low count and had great capacity when it happened. I don't want to have to buy another one when this one is fairly new.

    ... The apple genuis said it is still safe to use, that doesn't sound right.
    I agree with you, that's not right.
    This may seem to be a little problem - fix it before it becomes a big one.

  • I have an iMac and my keyboard doesn't work. How can I fix it. Got it in 2011. Also my mouse is acting up

    I have an iMac and my keyboard doesn't work. How can I fix it. Got it in 2011. Also my mouse is acting up

    What OS X are you running and do you have USB or Wireless input devices...?
    For wireless devices, take a look at > Troubleshooting wireless mouse and keyboard issues
    USB keyboards and mice generally don't have connection issues, but they and there cords do occasionally go bad.

  • Problem with XP Pro sp1 install - keyboard doesn't work - MBP

    After using bootcamp to repartition the HD and rebooting with an xp pro sp1 cd, the blue windows installer loads and runs fine up to where you need to press the enter button to install windows or F3 to exit. At this point, the keyboard doesn't work at all and I have to push the power button. I also can not load osx or the osx boot disc, but the xp disc still loads fine. Currently working on slipstreaming a w/ sp2 to see if this will fix the problem. Prior to bootcamp, I upgraded osx and my firmware. Anyone else encounter this?

    You need to use SP2. There is a reason it's recommended by Apple. If you have a valid XP install disk you can easily slipstream it with SP2, which is perfectly legal and effective, and is a relatively painless process.
    http://www.helpwithwindows.com/WindowsXP/winxp-sp2-bootcd.html
    Nick

  • KEYBOARD DOESN'T WORK IN ALL JAVA APPS

    I think there are a bug with Java,
    but some keys of my French keyboard doesn't work with ALL Java APPS (Solaris Management console...), but work fine with all other apps.
    When I use Xsun, there are no problem, all keys work, but with Xorg, some keys doesn't work. (Only in Java Apps).
    I had got this bug with Sun Solaris 10 and Sun Solaris 11 (6/05 Express)
    This is a very nasty bug, I have got a PS/2 keyboard.
    Willits

    Enable multilib repo in /etc/pacman.conf , pacman -Syy and pacman -S flashplugin
    Last edited by Halcyon22 (2010-09-14 13:34:53)

  • The backlight of keyboard doesn't work in win7, with a well setup bootcamp drivers

    The backlight of keyboard doesn't work in win7, with a well setup bootcamp drivers

    Forum and support for Boot Camp:
    http://www.apple.com/support/bootcamp

  • Italian keyboard doesn't work under the gui

    I have an italian keyboard on a x86 Solaris 10 installation.
    All the patch available using Sun Update applied but the keyboard doesn't work, it still works only as a USA keyboard.
    Forcing it as a Italian layout at startup (pressing esc and using the boot utility) make the keyboard work in the consolle with the correct layout but under the gui, after the dtlogin startup, the key doesn't work correctly. Every key is "shifted" of one position, so inserting "root" result in "eiir"
    Even applyng the 118966-08 patch as suggested doesn't work.
    Obiouvsly I used the gnome panel to set the correct keyboard under gnome but with no result
    Both the two type of italian keyboards don't work, the standard one and the 104 "ibm" italian layout.
    All this keyboards work fine on the same PC with both WindowsXP and Linux Ubuntu.
    Any suggestion to fix this ?

    The solution was to reconfigure the X-Server: In a console-window I called kdmconfig and corrected the keyboard settings: it was a US-Keyboard. Nobody knows ... At installation time I configured a german keyboard.
    A remaining problem is that my mouse and keyboard are connected via USB and they are frozzen after boot. First when I physicaly detach both and reconnect them they start working in an ordinary manner. I saw a forum entry which talked about BIOS-settings.

  • One button of the keyboard doesn't work correctly

    Hi there,
    I have a problem with my keyboard:
    One button of the keyboard doesn??t work correctly: I want to write down a vowel with an accent (like in French and Spanish?), but if I press the button ´ and then the vowel, TWO dashes (´´) and the vowel appear: ´´i. Normally, there would automatically be an accent on top of the i.
    I have already tried a different keyboard, but it??s the same problem when I connect it to my notebook. I have also tried to choose a different language like French and Spanish, where they have those accents, but it still doesn??t work.
    It would be great if somebody could help me.
    Thanks a lot,
    Hanna

    Hi Hannah,
    You do not say which options you have changed to try using a different language, but there are several options which do slightly different things.
    If you go into Control Panel and select "Regional and Language Options", a new window opens with 3 tabs across the top. Choose "Languages" (the middle one), then press the "Details" button. This opens another window which allows you to view and change settings including the current input language and keyboard settings.
    Changing some of these settings will not make any difference until you reboot your machine.
    I hope this helps, let us know how you get on!
    Weezle

Maybe you are looking for

  • Cannot ping inside IP behind sonicwall from Cisco ASA 5500

    I have a sonicwall at site B and the cisco asa5500 at the main office. (site A) The site to site VPN is working, but I can not ping the inside ip (10.1.5.2) of the sonic wall from Site A. I need this only to access the computers behind the sonicwall

  • Problem in displaying quantity in screen field.

    Hi all, Am facing a problem in displaying the quantity in a screen. In my program,am displaying the material no , unrestricted stock , blocked stock and the related pending prs for that material  say mat no - 6021  Un.Res.Stock - 100  blocked stock 1

  • User Usage Report

    I want to generate a report on the usage of users account within our database. Do you know of any simple software/ procedure that enables me to create a list of data containing the last logins or the complete login history of all logins. I am using o

  • Tabstrip of report SAPMF02D translate only in English

    Dear All, i have a SAP ECC6.0 EHP4 netweaver here my component: SAP_ABA 701 0007 SAPKA70107 Cross-Application Component SAP_BASIS 701 0007 SAPKB70107 SAP Basis Component PI_BASIS 701 0007 SAPK-70107INPIBASIS Basis Plug-In ST-PI 2008_1_700 0004 SAPKIT

  • Round trip clearing adobe form field values not binded to webdynpro context

    Hi , I have developed a webdynpro ABAP application with Interactive form. I'm calling a webservice on 'exit event' of the one of the form fields. Once webservice is executed, Im filling a table with 300 rows which is in the form. The table fileds are