My keyboard has a lag on the first keystroke and then catches up

I am running the latest Mavericks on my MacBook Pro which I purchased less than a year ago.
Now whenever I bring up a screen or try to change input fields, the keyboard is lags behind the rest of the machine, including mouse.
This is aggravating but recent.
Any suggestions?
Paul

I would first try resetting PRAM
http://support.apple.com/kb/ht1379

Similar Messages

How do I create a 1d array that takes a single calculation and insert the result into the first row and then the next calculation the next time the loop passes that point and puts the results in thsecond row and so on until the loop is exited.

The attached file is work inprogress, with some dummy data sp that I can test it out without having to connect to equipment.
The second tab is the one that I am having the problem with. the output array from the replace element appears to be starting at the index position of 1 rather than 0 but that is ok it is still show that the new data is placed in incrementing element locations. However the main array that I am trying to build that is suppose to take each new calculation and place it in the next index(row) does not ap
pear to be working or at least I am not getting any indication on the inidcator.
Basically what I am attempting to do is is gather some pulses from adevice for a minute, place the results for a calculation, so that it displays then do the same again the next minute, but put these result in the next row and so on until the specifiied time has expired and the loop exits. I need to have all results displayed and keep building the array(display until, the end of the test)Eventually I will have to include a min max section that displays the min and max values calculated, but that should be easy with the min max function.Actually I thought this should have been easy but, I gues I can not see the forest through the trees. Can any one help to slear this up for me.
Attachments:
regulation_tester_7_loops.vi ‏244 KB

I didn't really have time to dig in and understand your program in depth,
but I have a few tips for you that might things a bit easier:
- You use local variables excessively which really complicates things. Try
not to use them and it will make your life easier.
- If you flowchart the design (very similar to a dataflow diagram, keep in
mind!) you want to gather data, calculate a value from that data, store the
calculation in an array, and loop while the time is in a certain range. So
theres really not much need for a sequence as long as you get rid of the
local variables (sequences also complicate things)
- You loop again if timepassed+1 is still less than some constant. Rather
than messing with locals it seems so much easier to use a shiftregister (if
absolutely necessary) or in this case base it upon the number of iterations
of the loop. In this case it looks like "time passed" is the same thing as
the number of loop iterations, but I didn't check closely. There's an i
terminal in your whileloop to read for the number of iterations.
- After having simplified your design by eliminating unnecessary sequence
and local variables, you should be able to draw out the labview diagram.
Don't try to use the "insert into array" vis since theres no need. Each
iteration of your loop calculates a number which goes into the next position
of the array right? Pass your result outside the loop, and enable indexing
on the terminal so Labview automatically generates the array for you. If
your calculation is a function of previous data, then use a shift register
to keep previous values around.
I wish you luck. Post again if you have any questions. Without a more
detailed understanding of your task at hand it's kind of hard to post actual
code suggestions for you.
-joey
"nelsons" wrote in message
news:[email protected]...
> how do I create a 1d array that takes a single calculation and insert
> the result into the first row and then the next calculation the next
> time the loop passes that point and puts the results in thsecond row
> and so on until the loop is exited.
>
> The attached file is work inprogress, with some dummy data sp that I
> can test it out without having to connect to equipment.
> The second tab is the one that I am having the problem with. the
> output array from the replace element appears to be starting at the
> index position of 1 rather than 0 but that is ok it is still show that
> the new data is placed in incrementing element locations. However the
> main array that I am trying to build that is suppose to take each new
> calculation and place it in the next index(row) does not appear to be
> working or at least I am not getting any indication on the inidcator.
>
> Basically what I am attempting to do is is gather some pulses from
> adevice for a minute, place the results for a calculation, so that it
> displays then do the same again the next minute, but put these result
> in the next row and so on until the specifiied time has expired and
> the loop exits. I need to have all results displayed and keep building
> the array(display until, the end of the test)Eventually I will have to
> include a min max section that displays the min and max values
> calculated, but that should be easy with the min max function.Actually
> I thought this should have been easy but, I gues I can not see the
> forest through the trees. Can any one help to slear this up for me.

My 4630 printer only prints the first page and then cancels

My 4630 printer only prints the first page and then cancels the rest of the document. I have to manually choose to print one page at a time. If I try to print a document, it prints the first page and then cancels printing the rest of it. It's driving me crazy. I just bought this printer and, other than that, it works fine. I tried the HOTFIX link that was attached to a previous link as well as other microsoft updates, however, am still having no luck.

Hi @ImaniL,
I believe I have something that could assist with your printing issue
My colleague, @JERENDS, has created these instructions to help with issues similar to yours, and I believe his instructions will help resolve your printing issue!
Let me know how things go, and if that doesn't fix it, I will certainly see what else I can find for you
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

HT2954 My receive function on the email gets just the first email and then stops

My receive function on the email gets just the first email and then stops, but the wheel keeps turning like it is looking. What can I do to get it functioning again. This program has been steady for several years so something in it is tweaked. Other computers can access the account just fine. If I shut down the mail program and start it up again it will get the same email and then go into the spinning mode again. Is there a file I can delete to reset the account. I have tried to re input the SMTP data but no luck. Any Ideas?

Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move this folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.
If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
/Users/YourUserName/Library/Mail/MessageRules.plist
/Users/YourUserName/Library/Mail/MessageRules.plist.backup
Note, in 10.5 & up /Users/YourUserName/Library/Caches/Mail/ may or may not exist.

Please help me. I've just lost my iphone so I related to my backup contacts on icloud to get my contacts back. But my contacts only show at the first time and then they dissappeared, my contacts was empty. How can I see my contacts?

Please help me. I've just lost my iphone so I related to my backup contacts on icloud to get my contacts back. But my contacts only show at the first time and then they dissappeared, my contacts was empty. How can I see my contacts?

If they aren't on icloud.com they are no longer in iCloud. If you don't have another backup, I'm afraid they're gone.

I plugged my iphone 4S into my computer for the first time and then my photos were replaced with the ones from my old iphone, how do i get them back?

i plugged my iphone 4S into my computer for the first time and then my photos were replaced with the ones from my old iphone, how do i get them back?

Try restoring from the backup created at the beginning of the sync process:
Without connecting your phone, open iTunes, go to Preferences, on the Devices tab check "Prevent...from syncing automatically"
Connect your phone, right-click on the name of your phone when it appears on the left sidebar in iTunes
Select Restore from backup, choosing your most recent backup to restore from
Disconnect your phone and confirm that your photos are back
Go back to iTunes>Preferences>Devices and re-enable automatic syncing.

I would like to change of type of subscription to improve its level. Should I cancel the first one and then take another one ?

hello
I would like to change my type of subscription (adobe reader) to improve to get a higher level. Should I cancel the first one and then take another one ?
thks
cecile

Hi Cecile,
Please Contact Customer Care; an agent will be able to change your subscription from ExportPDF to Adobe PDF Pack, or an Acrobat subscription.
Best,
Sara

When I create a new project in iMovie and drop clips into it, it plays the first one and then quits right near the end of the second clip. I have re-started my computer, tried a new project etc, and no luck, does anyone know how to fix this issue?

When I create a new project in iMovie and drop clips into it, it plays the first one and then quits right near the end of the second clip. I have re-started my computer, tried a new project etc, and no luck, does anyone know how to fix this issue?

This is a part of the larger MacBook Pro connectivity issue. There are several related threads dealing with the MBP's networking problems. If your unit is suffering from this type of difficulty, good luck ... (or a long ethernet cable)
(PS Everybody please make noise on this one so apple comes up with a solution.)
< Edited by Host >

I'm having problems with bluetooth mouse and keyboard. They work for the first 10 minutes then stop communicating.

I have to turn the computer off in order to get control of the computer again. Any ideas of what the problem may be?

You can run Bluetooth diagnostics by holding down the Option key and clicking the Bluetooth icon in the status menu bar.
Instructions here > OS X Mavericks: Troubleshooting Bluetooth device connections | Computerworld Blogs

I have a LaserJet 5L printer and I can't get it running properly under 10.5.8 while it works fine under 10.4.11. It only prints the first document and then shows the queue and prints slow like ****, it says so, but nothing printed after30 minuts.

Hi.
I have problems to get my Laser Jet 5L running properly under 10.5.8. I prints the first page/document and then it says1,36 % printed than printing but nothing happens. Under 10.4.11 everything works fine, sometimes I have to get the print jobs running again,but then it works.
I have the Laser Jet 5L connected via USB to parallel.
I am running a PowerBook G4 1,67 GHz and 2 GByte RAM.
Best regards
LasertJet5LApple

Hello, since nobody has piped in yet...
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x
1. To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
2. Choose System Preferences from the Apple menu.
3. Choose Print & Fax from the View menu.
4. Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."     As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot.

I can't print multiple pages from a website using the site's print button or 'file - print' and if I try to save as a PDF, it still only saves the first page and then cuts off.

I'm using Mac OS X 10.5.8 and Firefox version 3.6.8. When I'm on a website and try to print the info on the site, whether I use the site's own 'print' option, or I go to the Firefox toolbar and try to use 'File->Print', only 1 page prints out - it just cuts off mid-page. If I try to save as a PDF instead, the same thing happens in exactly the same spot - it saves as a 1-page PDF and cuts off in the middle of the page. I've already tried all of the suggestions here https://support.mozilla.com/en-US/kb/Printing+a+web+page?s=printing&as=s and the suggestions here http://kb.mozillazine.org/Problems_printing_web_pages and nothing has worked.
I appreciate any help!!

I have the same problem... not being able to print website 'Print' pages. I have read carefully the above link and have followed the reset directions in about:config, but I still cannot print in Firefox. Both Google Chrome and IE work perfectly every time. I have verified that the correct printer is selected and that the margins are in order (0.5 all around happen to be what mine are set for). I have resorted to use the Firefox Add On "View this Page in IE" whenever I need to print something. Works like a charm, but come on... it should work in Firefox too! I know there is some setting or something, but the Problems_printing_web_pages link had nothing there that worked for me.

When I open Firefox, it goes to the first page and then stops, saying "Not Responding" with the cursor spinning. What can I do to fix this? Thanks for any help

When I open Firefox, it goes to the first page I open, but then stops and says "Not Responding" with the mouse cursor spinning. I hit the close button and it says Windows is searching for a solution (which doesn't come).
When I open Firefox again, it says:
Well, this is embarrassing.
Firefox is having trouble recovering your windows and tabs. This is usually caused by a recently opened web page.
You can try:
Removing one or more tabs that you think may be causing the problem
Starting an entirely new browsing session
Any ideas? I gretly appreciate any help. Thanks!!

What is that first page?
Can't you open any web pages in Firefox?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

How to show the first page and then rest will be created in background

Dear Friends,
I am suffering from some seriouse issue of slow opening of report....
I am using vs2005 and asp.net 2.0 and crXI R2 sp4,
using oledb for getting data from ms sql server 2005.
Now my one report called accounts ledger
when i execute the report query it takes 1.03 mins for 515000 records..no issue with it ,
when i execute the report from report desginer for 515000 records its taking 26 mins . It is generating all
32000 pages.
Now same report i run from my web based erp application it takes 30mins to execute 32000 pages now
this is too much time it is taking and now our client is fedup of ussss..
So is there any way that we can show First page at the earliest and rest of the pages willl be getting created in background? is it possible ?
We have to give them the solution as sson as possible...
can anyone suggest the diff ways to get out of this problem .......
Please ur co operation will be appriciated....
thansk

Hi Mithun,
Here are a few points related to performance issue. These might be helpful.
The performance of a report is related to:
External factors:
1. The amount of time the database server takes to process the SQL query.
( Crystal Reports send the SQL query to the database, the database process it, and returns the data set to Crystal Reports. )
2. Network traffics.
3. Local computer processor speed.
( When Crystal Reports receives the data set, it generates a temp file to further filter the data when necessary, as well as to group, sort, process formulas, ... )
4. The number of records returned
( If a SQL query returns a large number of records, it will take longer to format and display than if was returning a smaller data set.)
Report design:
1. Where is the Record Selection evaluated?
Ensure your Record Selection Formula can be translated in SQL, so the data can be filter down on the server, otherwise the filtering will be done in a temp file on the local machine which will be much slower.
They have many functions that cannot be translated in SQL because they may not have a standard SQL for it.
For example, control structure like IF THEN ELSE cannot be translated into SQL. It will always be evaluated
in Crystal Reports. But if you use an IF THEN ELSE on a parameter, it will convert the result of the condition to
SQL, but as soon as uses database fileds in the conditions it will not be translated in SQL.
2. How many subreports the report contains and in section section they are located.
Minimise the number of subreports used, or avoid using subreports if possible because
subreports are reports within a report, and if you have a subreport in a details section, and the report returns 100
records, the subreport will be evaluated 100 times, so it will query the database 100 times. It is often the biggest
factor why a report takes a long time to preview.
3. How many records will be returned to the report.
Large number of records will slow down the preview of the reports. Ensure you only returns the necessary data on the report, by creating a Record Selection Formula, or basing your report off a Stored Procedure, or a Command Object that only returns the desired data set.
4. Do you use the special field "Page N of M", or "TotalPageCount"
When the special field "Page N of M" or "TotalPageCount" is used on a report, it will have to generate each page
of the report before it displays the first page, therfore it will take more time to display the first page of the report.
If you want to improve the speed of a report, remove the special field "Page N of M" or "Total Page Count" or formula that uses the function "TotalPageCount". If those aren't use when you view a report it only format the page requested. It won't format the whole report.
5. Link tables on indexed fields whenever possible.
6. Remove unused tables, unused formulas, unused running totals from the report.
7. Suppress unnecessary sections.
8. For summaries, use conditional formulas instead of running totals when possible.
9. Whenever possible, limit records through selection, not suppression.
10. Use SQL expressions to convert fields to be used in record selection instead of using formula functions.
For example, if you need to concatenate 2 fields together, instead of doing it in a formula, you can create a SQL Expression Field. It will concatenate the fields on the database server, instead of doing in Crystal Reports.
SQL Expression Fields are added to the SELECT clause of the SQL Query send to the database.
11. Using one command as the datasource can be faster if you returns only the desired data set. It can be faster if the SQL query written only return the desired data.
12. Perform grouping on server
This is only relevant if you only need to return the summary to your report but not the details. It will be faster as less data will be returned to the reports.
Regards,
Shweta

HT201320 Setting up mail only works the first time and then fails...

Hello,
I own a new iPad 4.
Setting up my own mail accounts works great for the first time (I see new mails and I can sent mails), but the second time I open the Mail-App it complains about my mail settings.
Mails are provided from my own domain. Using other mail clients I don't have issues.
Setting is based on IMAP ssl/port 993 and ssl/578. iPad runs on IOS6.1.
Do you have an idea why?
Carsten

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

My music app resets a song when I close the phone the first time and then when i open the phone again.

Does anybody have the same problem?

Check in preferences > general > Startup: Do you have "Show my windows and tabs from last time" selected? If so change to "Show my home page" (or blank page).
Note: this may happen when quitting Firefox, and you inadvertently click "Save and Quit" and select "Do not ask next time".

My keyboard has a lag on the first keystroke and then catches up

Similar Messages

Maybe you are looking for