My keyboard light keeps blinking and a message on computer says connect keyboard with bluetooth

My keyboard light keeps blinking and the computer has a grey screen with picture of the keyboard with message saying connect your keyboards bluetooth to computer...but it doesnt do anything even when i shut computer off then turn it back on.

Sounds like a pairing issue. See if this article helps http://support.apple.com/kb/HT1809

Similar Messages

  • HT1551 after finish installing an update, the the status light keeps blinking and a picture of the connection between the micro USB and iTunes shows up - what is this about?

    after finish installing an update, the the status light keeps blinking and a picture of the connection between the micro USB and iTunes shows up - what is this about?

    The update failed - using a USB to microUSB lead (that Apple annoyingly don't include!), try to restore the AppleTV software to current version software using instructions here:
    http://support.apple.com/kb/HT4367
    Pay attention to differences in power connection depending on whether or not you have AppleTV2 or AppleTV 3.

  • Apple TV does not work after trying to update software. Main light keeps blinking and on the screen shows itunes icon and a usb cable. What does that means?

    My Apple TV does not work after trying to install the new software update. The main light keeps blinking rapidly and on the screen it shows the itunes icon and a USB cable. What does that mean?

    The Apple TV is in recovery mode. Try to restore the Apple TV. Follow the link for instructions on the restore process.
    http://support.apple.com/kb/HT4367

  • Apple tv light keeps blinking and never connects

    My Apple TV keeps blinking as soon as it has power and never stops. It worked the last time I used it. I tried unplugging and reconnecting, etc. Finally in desparation I hooked my older apple tv to the same tv using the in place cords and it worked. Now how to make this newer one work. Help!

    You need to restore
    Restore your Apple TV (2nd and 3rd generation) - Apple Support

  • Keyboard lights keep blinking?

    My MacBook Pro keep blinking on & off

    Try a SMC reset:
    http://support.apple.com/kb/HT3964
    Ciao.

  • I am having problems reestablishing my Time Capsule.  I had to get a new internet modem and that seemed to screw up my Time Capsule.  The amber light keeps blinking and it's not being picked up when my Macbook scans or when my PC scans for the wireless ne

    I can't find my Time Capsule on my networks anymore.  It's like it doesn't exist. We got hit by a storm and that might have caused our internet modem from ATT to fry.  I replaced the modem today but now my Time Capsule isnt working.  It's blinking amber.  The PC its connected to through the ATT modem isn't finding it as it scans and its not in utilities.  My MacBook isn't finding the time capsule either when it scans.  Whenever I hooked up all the wires to the time capsule and the modem, the internet stops working.  I've tried resetting the time capsule but it's still blinking.  I had all my computer equipment on a power surge protector. A pretty good one.  All my other equipment is fine.  The ATT modem was old, so I thought it might not have even been the lightening.  Nothing else in home was injured by storm.  I am freaking out and need help!!!  I can't use my MACbook to do my internet work and all my files were backed up on the time capsule. 
    Another problem. My Time Machine isn't backing up now either.  What is up with that? 
    I would be soooo grateful if someone can help me!  Thanks a million!

    A PC can have more issues connecting than a Mac.
    But it really should not matter.. so just try it in situ.. press and hold the reset.. once it starts up, it will return to default IP, 10.0.1.1 the PC should then be able to find it via the airport utility.
    If not drag it over to the Mac and plug in there by ethernet.. or since it is a laptop, really should not be that difficult to drag the Laptop and plug it into the TC.
    Important thing is to get access to the TC.
    The Mac if it is running lion, then you MUST download and install 5.6 airport utility to do anything useful.
    http://support.apple.com/kb/DL1482

  • HP Laserjet p1102w blue WIRELESS light keeps blinking and computer is not able to locate the printer

    Have been using the printer on wireless and it was working fine until I had to cancel a print and might have accidentally press wireless button and "X" cancel button together and havn't been able to print since.
    Did everything: 
    - update firmware: LJP1100_P1560_P1600_FW_Update.dmg
    - update printing software: HP-ePrint_v2.4.1.dmg
    - Reinstall wireless setting
    But the printer will now shot from Add new printer- Bonjour setting.
    The odd thing is When I switch the wifi on computer on and off the printer will show in Add new printer- Bonjour setting, for a second and disappear again. 
    The printer still works via cable. 
    There were 3 machine using the printer via wireless now has all same issue. 
    Thank you for any help or tip! 

    Hello eeoorhee,
    Welcome to the HP Forums.
    I see that you are having an issue with connecting the printer over the wireless connection.
    I have a few steps that we can take to troubleshoot this issue.
    First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    I also suggest that you do an uinstall of the software and drivers and reinstall.  Please click on the link that I have added for when The Printer is Not Found During Wireless Installation.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thank you for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Laptop won't start quickly but power wifi and caps lock light keeps blinking

    Hi, it has happened before too but rarely but nowadays it happens on daily purposes.
    When I switch on my laptop after leaving it for 8-9 hrs, it won't start up but instead power, wifi and caps lock light keep blinking. I tried removing battery and pressing power button for few minutes but nothing happens. Then i left it like that with lights blinking and after 15 20 minutes it booted. I did same yesterday too. I left it like that it booted after 20 minutes..so My question is "why is this happening? Is it a motherboard issue or is it because of cold moisturous weather here and laptop takes time to get warm up?" Should I show it to HP Service center?

    Hi @Nishant5788
    Welcome to the HP Support Forums. I see that you are having a problem getting your notebook to boot up normally. As for what is causing the problem the blinking Caps Lock should tell us what is causing the problem as it should be blinking in a pattern. This HP document Computer Does Not Start and LEDs blink has a chart that will tell you what the blink codes mean.
    This is most likely a hardware issue and you can give us a call regarding repair options.  You can reach HP Total Care at 1-800-474-6836 in North America or start here if you live outside of North America.
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Amber Light Keeps Blinking

    Amber light keeps blinking. I have been unable to set up wireless and never get a green light. Connection to internet works via cable to the Airport base station. I have done numerous resets and with power on off cycle per instructions on page 29. This is a brand new unit, arrived today, so it has never been working. I have hit the reset button both with power on and while powering up. Did a firmware update too. Still no luck. Is this a defective unit since it will not reset? I have also done complete resets with the DSL modem cycled off and back on, Base station off and brought back to power, and MacBook Pro cycled on and off too.
    Should I call the vendor and ask for a replacement?
    Popadave

    Hello popadave. Welcome to the Apple Discussions!
    A persistent, flashing amber light indicates that any of the several potential conditions may require your attention:
    o The base station has not yet been configured because it is new, or the reset switch has been set.
    o You have selected a security configuration that is not recommended.
    o One of several other conditions, such as a disconnected Ethernet cable or invalid IP address has been detected.
    (ref: http://docs.info.apple.com/article.html?artnum=305101)
    If you run the AirPort Utility, it will show an amber circle on the summary page next to the area(s) causing the problem. Click on this amber circle and it should provide an explanation.
    Please post back what you find.

  • ISight camera green light keeps blinking.

    using a macbook pro with retina display.
    The green light keeps blinking when not in use. 
    The camera is still able to function.

    If you are concerned about the blinking although your camera works, contact Apple Support or  an Apple Authorized Service Provider for service.
    Message was edited by: EZ Jim
    Mac OSX 10.10.1

  • HT1551 the led light keeps blinking after restarting it

    The apple tv light keeps blinking after restartin it with remote.

    You will need to restore it on a computer using iTunes.
    Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support
    Scroll down to the section titled:If your Apple TV still does not respond or if you were unable to follow the above steps

  • Red light stops blinking and then stays solid

    This one is strange. I open an email on my BB and the red light stops blinking and then stays solid for about 5 minutes. It doesnt go off when I close the email either.
    Took the battery out to see if that would clear it but it still doing it.
    Any thoughts ?????

    Hi Willsie,
    Sounds like when the red light is solid, the device is still usable? Assuming this is correct, I have three questions for you:
    1. Can you you confirm this problem ONLY happens when you open up emails in the Messages application?
    2. Can you tell us the application version you are running from (OPTIONS > ABOUT)?
    3. Also, which third party applications do you have installed?
    tnx

  • Firefox keeps blinking and stalling

    I have used firefox for years. I like to keep a lot of tabs open so I don't have to search around.
    Firefox keeps blinking and stalling as hour glass pause kicks in every 10-20 seconds. If trying to type it messes up your flow.
    Don't know the cause. Suspect repeated ajax calls from some page but don't know which one.
    Here's a jing video of the problem:
    http://screencast.com/t/5jmTpAT41sf

    I see the whole window blanks out. What about the other windows?
    What about the screen itself? Was Firefox full screen or less?
    If you have problems with current Shockwave Flash plugin versions then check this:
    * see if there are updates for your graphics drive drivers
    '''https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration'''
    * disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
    '''https://forums.adobe.com/message/4468493#TemporaryWorkaround'''
    * disable hardware acceleration in the Flash plugin
    '''https://forums.adobe.com/thread/891337'''
    See also:
    * '''http://kb.mozillazine.org/Flash#Troubleshooting'''
    '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
    While you are in safe mode;
    Type '''about:preferences#advanced'''<Enter> in the address bar.
    Under '''Advanced,''' Select '''General.'''
    Look for and turn off '''Use Hardware Acceleration'''.
    Poke around safe web sites. Are there any problems?

  • I have an iphone 4 and i just updated to ios5 and i can't get my music to stay on my iphone and i also keep getting and error message when trying to restore iphone. anyone else having this problem?

    i have an iphone 4 and i just updated to ios5 and i can't get my music to stay on my iphone and i also keep getting and error message when trying to restore iphone. anyone else having this problem?

    When you restore, which error # appears?

  • HT1420 I am trying to rent a movie on my Apple TV and I keep getting the error message "Apple TV cannot connect to the server"  What can I do to correct this problem?

    Why does my Apple TV keep giving me the message "Apple TV cannot connect to the server" when I try and rent a movie to watch?

    Hello dprice3885,
    Thanks for using Apple Support Communities.
    Take a look at the Wi-Fi troubleshooting since you can access the network but not the content.
    Apple TV: Basic troubleshooting
    http://support.apple.com/kb/HT6106
    Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS4546
    Have a nice day,
    Mario

Maybe you are looking for

  • After iOS 8 update, iCloud constantly asks for password

    Hello, after I updated to iOS 8 on my iPhone 5 and iPad air I am constantly having the window pop up on both devices asking me to enter my password for iCloud. I've had to unlock the account twice now. Could this be due to activating family sharing w

  • How to print JTextArea??

    I am trying to print JTextArea which has more than one page of text. When there is more than one page of text in JTextArea, it only prints what is there on first page eventhough it print multiple pages. Here is the code I am using. Let me know if you

  • Tab Function in Pages for iPad moved?

    Was using pages for ipad today, and I used to use a tab function from the top menu bar by hitting a button that looks like an align button and it allowed for page breaks and tab functions. I think I updated pages, and now I have to hold down as if I

  • What tags can be used with Notes?

    I have been searching all over to figure out what typs of tags can be used when creating Notes for the iPod. I keep comming back to this document http://developer.apple.com/hardwaredrivers/ipod/iPodNoteReaderGuide.pdf. It is supposed to show availabl

  • Using a nav bar with Dreamweaver in Catalyst

    I am trying to create just a navigation bar in Catalyst like you might in flash with animated rollovers. Then export the swift to use in a dreamweaver set of pages. The problem I am having is trying to get the page destination set up correctly. All I