My keyboard repeat is very slow, regardless of the System Preferences

I've tried playing with the System Preferences, but the keyboard repeat and delay stay slow and long regardless of the sliders.
Can anyone help?
Thanks,
Richard

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs.  The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Similar Messages

  • Keyboard repeat rate too slow

    Hi.
    For some reason I'm unable to increase the keyboard repeat rate in Windows XP. The slider in Control Panel / Keyboard is set to the maximum, but the rate is still too slow for my taste. I've never had a problem with this setting in Windows before, so I suspect it's either a problem with the Boot Camp drivers, or some other Apple hardware related issue.
    I've also tried to bypass the Control Panel and set the repeat rate through the registry. The value in HKEYCURRENTUSER/Control Panel/Keyboard/KeyboardSpeed is 31 when the Control Panel slider is at the maximum setting. Other sites have suggested that the unit of this value is "characters per second", and that it could be increased to at least 80. Unfortunately this does nothing for me, even after rebooting. Also, the current max. rate is more like 20 characters per second (which is not fast at all); I can decrease it - using the Control Panel or the registry editor - but it won't go any higher that 20/s (by my measurements).
    I'm using a Mac Pro with Boot Camp and rEFIt (Leopard 10.5.1, Windows XP SP2, and Kubuntu 7.10 Gutsy). Keyboard is the new aluminum Apple keyboard, but I've plugged in my old Logitech keyboard too, same result.
    Any ideas?

    Hi, Warren -
    If you have a reasonable size computer store (not an Apple one) not too far away, it may be worthwhile to visit it so she can sample the feel of various brands of keyboards.
    One thing to consider is that the keyboard should be compatible with Mac keyboard startup commands - not all are.
    I like the Macally iMediaKey keyboards - their layout is not as condensed as the newer Apple keyboards, and I like the action of the keys. In particular, I also like the fact that the keyboard has a functional power key, and extra programmable keys along the top - they're very handy for starting up commonly used programs without having to consume Fkeys.

  • After downloading 7 to my i-pad 2 the keyboard has become very slow responding and typing takes forever why?

    After downloading the new 7.0.2 to my i-pad2 the onscreen keyboard is responding very slow. I have to wait for several seconds for it to show up on the screen after touching any key.

    Reset all settings
    Settings>General>Reset>Reset All Settings
    Note: Data will not be affected but settings will be reset.

  • Hi from the last two days my iphone have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

    Hi,  from the last two days my iphone( iphone 4 with ios 5) have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore...
    iPhone Reset
    http://support.apple.com/kb/ht1430
    Try this First... You will Not Lose Any Data...
    Turn the Phone Off...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear and then Disappear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    Turn the Phone On...
    If that does not help... See Here:
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • My MacBook Pro is running very slow when using the internet and sometimes gives the pinwheel of death, any suggestions on how to fix?

    My MacBook Pro is running very slow when using the internet and sometimes gives the pinwheel of death, any suggestions on how to fix?

    <http://www.thexlab.com/faqs/sbbod.html>

  • Safari was very slow in opening up Google sites.  I found a discussion thread that suggested changing the "Configure IPv6" setting to "Off" in the System Preferences, Network, Advanced, TCP/IP section.  That seems to work well.  Are there any risks?

    Safari was very slow in opening up Google sites.  I found a discussion thread that suggested changing the "Configure IPv6" setting to "Off" in the System Preferences, Network, Advanced, TCP/IP section.  That seems to work well.  Are there any risks to leaving the Configure IPv6 setting to Off?

    Nope. You can always reverse that if you choose.

  • I get constant buffering very slow downloads and the pinwheel.  is there a keystroke remedy for this??

    i get constant buffering very slow downloads and the pinwheel.  is there a keystroke remedy for this??

    No magical keystroke remedy. The causes for this can be complicated.
    http://www.thexlab.com/faqs/sbbod.html
    Also check the health of the drive with the free demo of SMART Utiltiy.
    http://www.volitans-software.com/smart_utility.php
    Only happening while on the Internet or all over the place? What's your Internet speed?
    http://www.speedtest.net/

  • Recently bought a samsung NX30 camera which came with lightroom 5, after several hours of googling i got it setup properly with the correct camera raw to be able to access my raw images. I found my old laptop was very slow when processing the hundreds of

    recently bought a samsung NX30 camera which came with lightroom 5, after several hours of googling i got it setup properly with the correct camera raw to be able to access my raw images. I found my old laptop was very slow when processing the hundreds of images I usually take on a weekly basis.  I bought a new faster laptop but when I looked for the cd with the software and serial I could not find it in the Xmas clutter.  I downloaded a trial version of lightroom and got it working on my new laptop. Is there a way to access the serial number from my previously installed version and insert it into the trail version to make it work for me?
    Myron

    Mea culpa
    While i registered all my cs2 thru 6 versions and my lightroom 2 thru 4 versions and recorded the serials and saved the adobe registration emails.  Since this came as a freebee with the camera i neglected this vital step.  I have the instslled version on my old laptop but want to install it on my new one.  Thanks to Jim Hess I got the serial so all is well in my world and I will register it with ADOBE
    Myron

  • Why in Mac Os Lion is very slow to clean the "basket"

    why in Mac Os Lion is very slow to clean the "basket"

    Check in Finder > Preferences > Advanced tab > uncheck "Empty Trash securely".
    Regards,
    Captfred

  • My Jetpack 5510L says that its connected to 4G but its performing very slow, I removed the sim card and did a reset of the device. Any other suggestions?

    My Jetpack 5510L says that its connected to 4G but its performing very slow, I removed the sim card and did a reset of the device. Any other suggestions?

    I don't know who you would contact at Verizon to verify this, but I suspect you are in the same situation as me.  My unlimited Jetpack is now being throttled to a basically useless speed of .10Mbps.  Sometimes as low as .04Mbps.  Turns out this is done purposely as they are evidently eliminating unlimited.  They're doing this now even though accounts still display on the my device page as unlimited.  They have given no warning, no explanation and started it in the middle of a billing cycle.  At least for me.  Be prepared to pay about double for 20GB with I think and $8 per gig overage cost.  With the 5GB plan it appears they just throttle down to an unusable speed.  Currently considering saying goodbye to Verizon myself.  Even with some need to change plans and eliminate unlimited this isn't the way to treat customers during the change.

  • HT1338 my computer it's very slow when surfing the internet?

    my computer it's very slow when surfing the internet

    Hello again
    As suggested I checked all CPU data in the Activity Monitor folder and could not see anything running that appeared to be draining CPU space or competing with other applications.  The following are the results from the Activity Monitor data:
    CPU:  %User - 0.37, %System - 0.62, %Idle - 99.12
    System Memory:  Free - 4.90GB, Wired - 1.15GB, Active - 1.48GB, Inactive - 468.1MB, Used - 3.09GB
    I also ran a test on my Mac using www.sppedtest.net, the results are as follows:
    Ping Speed - 1575ms, Download Speed - 0.15Mbps, Upload Speed - 0.04Mbps
    I am hoping this provides enough information to direct me on what next to check as my Mac internet performance is still poor.
    Thank you for your time

  • My iphone 3g is very slow when accessing the internet is there anyway i can improve this

    my iphone 3g is very slow when accessing the internet is there anyway i can improve this

    What have you done thus far to try and remedy your situation?  Have you taken the recommended basic troubleshooting steps outlined in the User Guide?

  • Very slow, zaberaet all the RAM! I have a Macbook pro retina 8gb it does not pull Очень медленно работает,заберает всю оперативную память! У меня Макбук про ретина 8 гб его не тянет

    Very slow, zaberaet all the RAM! I have a Macbook pro retina 8gb it does not pull
    Очень медленно работает,заберает всю оперативную память! У меня Макбук про ретина 8 гб его не тянет

    Agreed! This bug with the ringtone delay (№4.1) is really annoying

  • Print service very slow to forward the job...

    Hi,
    On 10.5.1 server, in the system preferences, i created a new printer in LPD (Fiery Z3000).
    Then i started the print services ans published this new printer in "Bonjour".
    All users can now create this new printer shared by leopard server and print through this serveur but i wonder why the 10.5.1 server keep the jobs a very long time (5-10 mn) before sending it on the right printer.
    Do you know how i can setup Leopard server to print the job immediatly when it receives the PostScript file ?
    Thank you
    Marc

    hi,
    leopard server SHOULD relay the printing job to the printer immediately (at least it does so on my network). have you seen any log entries in the server admin for Printing or for DNS? Is DNS setup correctly for your printer (lookup and reverse lookup go to the same hostname/address?)?
    br,
    günther

  • Hello my keyboard it lights up even when I activate the icon in the system preference, I do not know what to do, please help me

    hello my keyboard it lights up even when I activate the icon in the system preference, I do not know what to do, please help me

    I am getting this exact same message on my phone!  That it is linked to apple ID 1****@qq.com - this has got to be a bug right?  My phone was linked to my apple ID but then I restored it and now it is saying it is linked to be above.  It is a little be too weird that @wqy8972222 is also getting that same message?

Maybe you are looking for