My keyboard's shortcuts often stop working on iOS 6.x (only on iPhone, iPad works perfectly).

Any ideas to solve that ? Already tried: deleting and re-writing, safari trick, rebooting million times, turning on/off iCloud (and also leaving documents sync off over iCloud). Unfortunatelly I ran out of options ...

sorry for the iphoto and os x mountain lion, didnt see when options were checked. Ps: Sometimes it works fine and then sudenttly stops again ..

Similar Messages

Command c shortcut has stopped working

Hi, my command c shortcut has stopped working on my macbook pro. Each letter still works individually however the shortcut no longer does. Could you please tell me how to fix this?

cecelia4557 wrote:
Thanks for the reply! Is this done through system preferences/ keyboard?
Thanks again
Also check in Sys Prefs > Speech

Command-Z keyboard menu shortcut is not working

Hi
Command-Z keyboard menu shortcut is not working in my profile i.e.,my login. But able to execute the same keyboard shortcut in other profile. ALl the other menu keyboard shortcuts are working fine. Have tried deleting Universal Access, HotKeys,Finder Preference plist,. from ~/Library/Preference/ folder. But of no use. This shortcut is not working for any of the app.
Thnks

ok will try that and will let you know.. But the undo keyboard shortcut works well in other user profile.

Safari very often stops working.

Safari very often stops working. I have tried to clear the history and coockies and powered off. Then Safari works on s few pages and stops again. I have checked the network by doing exactly the same things on another ipad, and that works fine. Any suggestions?

When you say that it stops working, I assume that you mean the app crashes and takes you back to the home screen. Close all of the apps in the recents tray on the iPad, clear Safar again (delete the cookies and data) reboot the iPad and then see if Safari behaves a little better.
Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.
Go to Settings>Safari>Cookies and Data. Now reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Keyboard and trackpad have stopped working

Hi there
My girlfriend and I have 3 yr old MBP's and her keyboard and trackpad have stopped working. She can plug in an external USB mouse and it moves around, but she can't type her password into the log in. hence she's stuck.
We have tried powering down and up 3 times, even taken out the battery.
Can anyone suggest help?
Thanks Rob

She needs a new top case. On older systems, the keyboard, trackpad, and even power button are all controlled via a single cable. Odds are, if you wait long enough, the power button will stop working too.
I'd estimate the repair cost at probably around $250-$300, so she might just want to be looking for a new laptop. You can also hit ebay and craigslist to see what you can find, just be careful with the screws for the top case. You get the wrong screw in a couple of the holes, they will never come back out until you break something.

Keyboard and Trackpad just stopped working completely

Hi, I'm on a MBP 2.4 GHz running 10.4.11. Beginning yesterday my keyboard and mouse completely stopped working. This happened twice. The first time I got them working again with a hard shut down, the second time I got them working by closing the screen, putting the computer in standby. When I opened the thing back up, everythign was working.
Today, though, when the keyboard and trackpad quit, I've been unable to get them working again.
My problem is similar to the ones experienced here by MBP 2.4 and MB Air owners:
http://discussions.apple.com/thread.jspa?messageID=7194888
With the difference being that I'm on Tiger, not Leopard and I can't get the key or pad to respond at all. The solutions offered at that thread don't work for me.
I've plugged in an external keyboard and mouse and those work fine.
Any help you can offer is appreciated.
Luke Baumgarten

Related to the keyboard and mouse or trackpad not working, I've found of late that the whole lot freeze up and that wretched spinning timer takes over ad infinitum. Only way out is to hold pwr button the customary 6-8 seconds, then re-start with pwr/option.
Problem could be related to (Apple) upgrades as it's after a new one that this problem creeps in.
Makes me want to either revert to Factory settings or, Heaven forbid, give this MacBook Pro the float test and go back to Microsoft or even dig out the old steam typewriter.
The latter may be the best option - my life has definitely NOT improved since I invested in this heap of junk and the almost daily offerings of wonderful software by Apple are now set up for Spam, they're such a waste of time...
So, that's my Sunday moan.
If I leave this thing alone while I make a cup of tea I'll find it frozen again by the time I come back - any help on this from anyone??? (Steam being a bit pricey these days)
Tamji

Multicamera keyboard shortcut keys stopped working

PP 2014.0.1 release.
My keyboard shortcut keys (standard: 0,1,2) were working, but they stopped working mid-edit. Restarting the application did not fix this. Mouse works - but what a crappy way to select a camera.
Any suggestions?

To answer my own question:
I discovered that the Multicamera track in the timeline must be targeted (enabled in the track header in the timeline) or the keyboard shortcuts to select a camera do not work. (I don't know how my track became untargeted, but it did.)
Although I understand how a keyboard shortcut will change the current clip in the multicamera sequence to the associated camera, the keyboard shortcut is strongly associated as input to the multicamera window, not the timeline. After all, I click on a camera view in the Multicamera program monitor to select that camera. I don't click in the timeline to do that. So It's not at all obvious that the multicamera track must be targeted for camera selection to work.
I find it confusing.
Do other users consider this a bug or good design?

Why do some keyboard shortcuts just stop working?

Since upgrading to Lion, some of my keyboard shortcuts - especially one for Mail - just stops working now and then and the only thing I can figure out to fix it is to restart the macbook.
The main one I've had trouble with is ⌘+ enter to send a message.
It seems (unreal, I know) that certain messages disable it in replies.
Any other way you can think of to reset the keystroke other than restarting?
Thanks
Tom

Hi there
Sounds like the project has somehow become corrupt. You may need to create a new project and copy/paste slides. You may also find that this will transfer over the issue. So it could be limited to a specific slide or even a single object on a slide.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Services/Keyboard Shortcuts Suddenly Stop Working

Hi,
I have had a problem for the past month or two relating to services/keyboard shortcuts that I have created in 10.10. I have had these same shortcuts for approximately 18 months and they worked fine on previous versions of OS X but since 10.10 they stop working after approximately 30-40mins. As I say it is only in 10.10 in 10.9 they worked all day every day without a problem.
I have created a service which allows me to right click on a directory of images and select a name to rename all the images within that directory in descending order. I have also created a keyboard shortcut that allows me to launch the Chrome App Launcher.
When I boot up the keyboard shortcut works fine. When I right click on a directory I see the services menu with all the services I have added. But after 30 minutes or so the keyboard shortcut no longer works (Apples on built in keyboard shortcuts work as they should) and if I right click on a directory the services entry is missing but apples own services appear at the bottom, the ones I have created created don't.
If I try to access services through the menubar the services I have created are missing but apples own services are still there. In the services menu my keyboard shortcuts also appear but clicking on them does nothing.
I have 2 images which show a before 30 mins how my context menu/menubar menu look and after 30 mins.
I hope my question and images make sense and someone can help me find a remedy for this.
http://imgur.com/SjcrgOS&zUgzTbO
http://imgur.com/SjcrgOS&zUgzTbO#1

Hi 454flutie,
In MAC 10.7 or later the Library is hidden. I sent you a link in the above post to unhide library , you can refer to that. Once its open you can navigate to Indesign locations and do the needful.
Steps to access hidden Library on MAC.
Open Finder.
On the top left there will be a option GO.
Click on Go and Go to Folder.
Type ~/Library and click on Go, it will open hidden Library.
To access Hidden Library:
http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html
Thanks,
Nikhil Gupta.

Why did the keyboard shortcuts just stop working?

I'm a little bit annoyed. I had several shortcuts set on my phone that I used often (my email address, phone number, things like that) and now they just don't work AT ALL. I've looked up some quick fixes, but none of them work. I take that back, the "add a new one and delete it" suggestion worked once, but the next day it stopped working. I just hope Apple is aware of this issue and it's fixed with the next update.

OS X Mavericks: If the numeric keypad doesn’t work

Utorrent shortcut keys stopped working

All the key shortcuts under the 'File' Menu from uTorrent (run under wine) stopped working.
ctrl+o , ctrl+d, ctrl+u and ctrl+n . All the other keyboard shortcuts from the other dropdown menus work; like ctrl+p, ctrl+r, ctrl+g . This problem started about a week ago, I did not change any settings to disable these keys.

There's a new version of Wine every few weeks. If you updated it recently, that's probably the cause.
Anyways, I agree with smakked. The latest version of Deluge has advanced RSS capabilties... so there really is no reason to use uTorrent. There's a billion other clients too, just do a package search for "torrent."

Cmd+right shortcut has stopped working

Ever since updating to Snow Leopard from Leopard, the Cmd+right arrow built-in shortcut to go to the end of a line of text has stopped working. This used to work in most applications, now it doesn't work at all.
I don't see anything in System Prefs > Keyboard > Shortcuts that is overriding it, and I haven't installed any applications different from when I was on Leopard. Cmd+left arrow shortcut is still working too, which makes this even weirder.
Any suggestions as to where I would start to troubleshoot this?

I'd hazard the guess at this moment that it isn't hardware related, but don't discount that until you test with a USB keyboard perhaps.
I hate to say it, but there seem to be a number of things like this lately with reports of the issue mysteriously clearing itself shortly thereafter. I'm not trying to bucket shop a load of pixie dust, so please don't make any plans around this particular summation

Maxbook air keyboard, trackpad and usb stop working

Hi everyone! i have a macbook air (early 2008) and it stop working the keyboard, the trackpad, and the usb port i think the bluetooth too becouse when i checked the hardware it doesn't appear i think is something wrong with the software becouse the ilumination of the keyboard still works but i can't use the restore disks becouse i don't have keyboard so i can't choose the start disk, any ideas what can it be? someone experience the same problem? Thanks

It's a common problem. I'm not aware of a fix yet.

TS3048 Number pad on extended keyboard stopped working after updating to OSX 10.9.1. Testing keyboard on old system still works perfectly.

Expanded keyboard stopped working correctly after updating my system from OSX 10.8.6 to OSX 10.9.1 and now 10.9.2. The keypad numbers do not work although the numbers along the top of the keyboard work fine. Moving the keyboard back to computer still using 10.8.6 and it works fine.

See if zapping the PRAM works. Check out KB Article: http://support.apple.com/kb/HT1379 Resetting your Mac's PRAM and NVRAM

NF 980 PS2 Mouse & Keyboard PS2 IC just stopped working.

Hello, My PS2 Mouse & Keyboard intergrated circuit connections just stopped working. My Rig is only 6weeks old & was using Win 7 Ultimate 64bit. Everything was fine untill yesterday. all of a sudden the connections don't work. I tried doing a system restore. rebooted several times, unplugged & reconnected both mouse & Keyboard plugs to the PS2 connections & still not being recognized at boot up. I plugged in a USB Mouse & Keyboard adaptor & is working fine. I'm thinking something happend to the IC chip. Are these Mobo's known for this problem? I don't think I'm going to RMA the Mobo unless something else happens.
Please let me know what you think. Thanks.

Quote from: vcooper1 on 27-January-10, 13:26:40
Hey Fredrik,
Thank you very much. All I did was shut down & remove the power plug like you suggested & removed the USB Mouse/Keyboard adaptor, & plugged back into the PS2 IC Connections, & it's working great.
Could you explain what happen?
Hi,
Keyboards and mice have electronic circuitry. When you just reboot or reset the machine, voltage still goes to the peripherals like the keyboard and mouse.
It sounds like, for some reason, the keyboard and mouse got into a non-working state, but when you rebooted or reset your machine, since power was still going to the keyboard and mouse, they didn't get reset.
When you unplugged the power, that removed power from everything (well, almost), including the peripherals, so that would've reset the keyboard and mouse.
If you have an external/USB hard drive, you can see this behavior by watching the drive light. When you shutdown your machine, the drive light will stay on, unless you unplug from the wall, or flip the switch on the back of the power supply.
Jim

My keyboard's shortcuts often stop working on iOS 6.x (only on iPhone, iPad works perfectly).

Similar Messages

Maybe you are looking for