My keyboard shortcuts on the iPhone 5 have stopped working
My keyboard shortcut have stopped working. If I restart my phone they start working but then will stop. Any ideas?
Searching around suggests this is a common problem. I've got the same issue. I just read that shortcuts are now sync'ed across other iOS devices. It probably has something to do with that. Sorry this isn't a helpful reply! But just wanted to chime in and indicate a lot of us have this problem.
Similar Messages
-
What would cause the microphone in the iPhone 3Gs to stop working?
What would cause the microphone in the iphone 3Gs to stop working?
Basic troubleshooting steps are restart, reset, restore. If these are tried and you still have problems then you have a hardware failure and will need to have your phone replaced by Apple.
-
My Imac The DVD drive have stopped working, the DVD goes in, the computer read it and it comes out again ..
Sofaware is: OS X 10.8.5 (12F37)
Can anybody please help, or would I need to buy a new drive?Have you tried one of those CD cleaning Discs yet?
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time. -
Keyboard shortcuts involving the letter Z don't work
I have Final Cut Express 4.0, and am using the book "Final Cut Express 4" from the Apple Pro Training Series to learn how to use it. Most of the keyboard shortcuts given in this book seem to work fine, but any involving the letter Z (as in "z" to select the Zoom In tool, "shift-Z" to make a sequence fit the Timeline window, etc.), nothing happens. My Z key works fine normally. Does anyone know what's wrong? I have noticed that my Mac's keyboard shortcuts in general have acted a little erratically lately.
Mine works fine. You might like to trash the preferences exactly like this:-
http://www.fcpbook.com/Misc1.html
Note that any special settings (Easy Setup etc.) will revert to the factory defaults. -
IPhone headphones have stopped working in one ear.
iPhone 5 headphones have stopped working in one ear. I've tried it on multiple devices and they still won't work. Is there anything I can do?
If the headphones exhibit the same issue on multiple devices, the headset is the issue.
Everything that was included in the box with the iPhone is covered under the same 1yr warranty. Take them to Apple for evaluation and possible replacement. -
I have an hp pavilion dv6910us and the speakers have stopped working and no longer show as installed as a device. I have tried reinstalling the audio device driver, but the hp website does not list a driver for my specific laptop.
Right now it shows that I have a bluetooth audio device installed. I have never installed this device and don't know where it came from.I had the exact same problem, updating updating the Mbox 2 drivers on the Avid website has fixed the problem.
http://avid.force.com/pkb/articles/en_US/Download/Mbox-2-Drivers?retURL=%2Fpkb%2 Farticles%2Fen_US%2FDownload%2FMbox-2-Drivers&popup=true -
I went in to use itunes today. It opened up right away, but I can't play any songs nor enter the store. It displays the message ' itunes has stopped working' and then closes. I tried removing itunes and reloading. Same thing. This is on my PC. My wife can still open itunes on her PC. Can anyone help?
Hello printer12
Start your troubleshooting with the article below as it goes over issues with iTunes crashing and multiple options to troubleshoot.
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1421
Regards,
-Norm G. -
Keyboard shortcuts to switch between search engines stopped working
The latest version of Firefox looks great but unfortunately the keyboard shortcuts that I use all the time to switch between search engines stopped working which leaves me stuck with version 33.1.
I'm talking about the shortcuts Ctrl + ↑ and Ctrl + ↓ described in this page:
https://support.mozilla.org/en-US/kb/keyboard-shortcuts-perform-firefox-tasks-quickly#w_search
Please solve this! Thanks.This worked perfectly, many thanks!!!
-
after running i disconnected my iphone headset. since then my iphone speakers have stopped working. i can still listen to music using headphones and the phone ringer still works but the speakers are silent. when i adjust the volume it indicates it is in "headphone" mode. Any idea how i can solve this problem ?
I have read in other threads with similar problems that cleaning the headphone jack/port seems to usually work. The simplest method is to rapidly plug/unplug the headphones a few times. See if that works.
-
My iPad Air has the latest software version(iOS 7.1.2) update, since that update the location services have stopped working. have a solution?
I have had the same problem, so many apps do not work properly without it! Apple says the internet satellite, the Internet satellite says Apple, back and forth with the blame instead of fixing the problem. Have turned location on and off, reset everything multiple times ( lots of hours and bandwidth to download ), Siri is now working part time, I guess she has cut back her hours for the summer. Even in these forums was suggested to check with Skyhook who does the global positioning, and after hours with them, they ended up saying that they have nothing to do with it anymore, Apple does. All to no avail and much frustration! I wonder if this is happening with the iPhone's? i'd like to know if this is happening with others that do not use satellite as their ISP? That would help narrow down the argument with Apple vs. satellite. Fell for you! Someone please help us! Ta
-
The letter keys have stopped working on my MacBook. Number keys and punctuation keys seem to work fine. Also, the trackpad treats a single finger click as a two-finger click. I tried an external mouse and this does the same.
If I restart, the mouse works fine but after a few minutes the issue starts. I have looked at a few forums and have checked the settings under system preferences but nothing jumps out at me :-(
Any ideas???Is this one of the MacBooks with a removeable battery? If so, try removing the battery and restarting the MacBook (obviously while plugged in to an AC adapter) and test to see if you still have this issue. Other users have reported that swollen expanding batteries have caused keyboard and trackpad problems.
If that isn't it, let us know, we'll keep helping you.
Best of luck. -
Internal speakers have stopped working (Lenovo W500 with Win 7 Pro)
Hi
I have a Lenovo W500 4062-5YG... O/S: Win 7 Pro
My sound device is a Conexant 20561 SmartAudio HD.
The problem is, that the internal speakers have stopped working all of a sudden... I think it is a hardware problem since when I hookup external speakers or headphones they produce sound... but I am no expert!
I have done the following to try and fix it:
Disable, then enable audio drivers
Uinstall, then install audio drivers
Setting the internal speakers as the default speaker source
Restoring the system to an earlier day (where I knew that the speakers had functioned)
None of these actions have worked.
I actually thought I could perform a hardware test on the speakers in the "Lenovo Solution Center"... but it doesn't seem like it:-(
So...
How can I know for sure whether it is a hardware or software problem?
And more importantly - How can I get my internal speakers to work?
Any help is appreciated.
Cheers
PhilipHello Philip,
As mentioned in your post, you have performed all the major troubleshooting steps to resolve the issue. I suggest you to update your BIOS also in order to resolve your issue. You can download and update the BIOS update utility from the below mentioned web link.
http://support.lenovo.com/en_SG/downloads/default.page?
Kindly click on Quick path and put your 7 Digit TYPE-Model number(40625YG) in the box and then click on the Find My Product. Please click on BIOS and then download the BIOS update utility according to your Operating System. It might resolve your issue. If it will also not work then it seem to be an issue with hardware. Kindly get in touch with the support centre they will assist you and try to resolve the issue.
Regards,
Harish
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Does the Iphone 4s have an AZERTY-keyboard in Belgium?
Does the Iphone 4S have an AZERTY-keyboard in Belgium?
If you select French under Settings>General>Keyboard>International Keyboards, you can select: AZERTY, QWERTY or QWERTZ, with AZERTY being default.
-
I removed my English keyboard and locked the iPhone and now the iPhone locked on Arabic keyboard
Hi Eliasaa,
You may need to try the directions for changing your keyboard language found in the following article:
iOS: Using international keyboards
http://support.apple.com/kb/HT4509
If this does not resolve your issue, you may need to follow the instructions in this article:
iOS: Forgot passcode or device disabled
http://support.apple.com/kb/ht1212
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
How can I map a keyboard shortcut to the reacord button in the Audio Mixer Panel?
I have been recording voiceovers in Premiere Pro CS5 for a while, but I would like to improve my work flow. Each time I record a take, I first press the record button (labeled as B below) with the mouse cursor and then press the Play button with the Spacebar keyboard shortcut. After I record the audio, I hit Stop and this toggles the record button off at the same time. I then must hit the record button again with the mouse to start the process over again.
Is there a way to map a keyboard shortcut to the record button in the audio panel so that I don't have to touch the mouse when recording voiceovers?There is not currently a shortcut for this. That's a good feature request, though. You can submit feature requests here.
Maybe you are looking for
-
My front panel blanks while I use the panel bounds property
When I execute the PanelBounds property of the front panel, the panel seems to blank for a brief moment allowing me to see the desktop and then reappears. I am wondering how to prevent this behavior or approach the problem in a different way. Any i
-
E-Recruitment business partner objects missing First and Last Name
Hi, We are on Netweaver 2004s and ERecruitment EHP3...it's installed on production but not activated. We are finding a bunch of BP records that exist where there is no First and Last Name on them, however the CP object does have this data. We can't
-
HT201493 How do I get to settings
How do I get to settings in the FindFriends app??
-
How do I recover a deleted mail account and all associated contacts?
How do I recover a deleted mail account and all associated contacts?
-
Hi I have a list of email addresses seperated by a comma. I want to insert all of those email address into a table using 1 query. Is that possible? Here is my the list i have... <Cfset mylist = "[email protected],[email protected],[email protected],[