My keyboard shortcuts started not working when I updated to iOS 6?

For example, I made is so when i type in "wru" it puts in "where are you"
This isn't working for me since I have updated to iOS 6.
Please help, thank you!

Today, I did a restore on my iPhone 4S, then reinstalled ios 6.1.1.    My airplay works now as I had set it up as a new phone instead of restoring the from one of the backups.
Sometimes when a person restores a phone from one of the backups, you will just reinstall the previous problem.  I also did not setup iCloud when I reinitialized my phone for I did not want the processing to be impeded.
I'll setup iClould later and see if that causes airplay to stop working as I think that was the cause. 
I believe the problem was that there was just too many apps running in the background and too little ram and/or processing power left for airplay.  With the new ios 6.1.1, it probably takes up more processing than previous versions and just enough to shutdown airplay and keep it from running. 
Miket502,  you might have a simular problem.  I'm not telling you what to do with your phone, but it may be a solution to do what I did.

Similar Messages

  • When icloud drive  is on on in ios8 and 8.0.2 the keyboard shortcuts do not work.

    When iCloud Drive  is on on in ios8 and 8.0.2 the keyboard shortcuts do not work.
    ANyone found a solution to this?
    I Have tried it several times and when tured off iCloud Drive and tested the shortcuts on an email, all was working ok...turning icloud drive on again and again the keyboard shortcuts stoped working. Solutions?

    Hi Susana,
    I have a similar problem: when updating to iOS 8 my iPhone 5 the shortcuts disappeared and more over the keyboard often gets stuck. When repeatedly turning off iCloud drive the shortcuts are present again and the keyboard works as it should. A factory reset of my iPhone was not successful.
    The only "workaround" seems to turn off iCloud drive, however, this is of course no solution at all.
    Since reports on keyboard malfunctions are rather rare in this community, I think, you and I are using some special settings or apps which cause this problem.

  • My "go to in point" and "go to out point" keyboard shortcuts are not working, and the default keys arnt either? any help would be amazing!

    my "go to in point" and "go to out point" keyboard shortcuts are not working, and the default keys aren't either? any help would be amazing!  I use these keys a million times a hour and since I have switched to cc I cant get them to work. track selection makes no difference or if there are markers on the timeline or not. 
    Anyone else feel me on this?
    any help?

    Well that still didn't make any kind of difference.  I would just do without it but I've becomes really use to it with Avid for so long.  I have to admit there are a lot of small moments like this that makes me miss Avid.  Any other suggestions? I have checked the keyboard shortcuts a few times and maybe I'm just missing something here...

  • Why does the mail not work when i updated my 5s to iOs 8?

    why does the mail not work when i updated my 5s to iOs 8?

    Thank you for the reply. But can you tell me what this configuration is about and how I should do this?

  • Music/iTunes Match not working properly since update to iOS 7

    Music/iTunes Match not working properly since update to iOS 7

    Try a Restart. 
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
     Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple. 
    Here is a link to their contacts with most of the information below. 
    http://www.apple.com/contact/

  • Keyboard shortcut does not work on first slide in Web Browser

    I'm using a workbook to learn Captivate.
    I added a keyboard shortcut, the Enter key, to buttons on the first and second slides.
    When I preview the project in Captivate, the shortcuts all work.
    When I preview the project in a Web Browser (specifically Firefox 3.6.16), the shortcut does not work on the first slide, but does work on subsequent slides.
    Any ideas why this would happen?

    Welcome to our community
    The issue is typically a matter of focus. Particularly in Firefox. In IE, when the page loads and is presented, the Flash object (your Captivate movie) is given focus. So the keyboard shortcuts work. But that doesn't happen in Firefox. In Firefox, you must first click somewhere on the Flash object to give it focus. From there forward, shortcuts work because the Flash object is now listening for them.
    In every class I facilitate I demonstrated this and advise that it's a good idea to have a button on the first slide. This serves two purposes.
    It forces the user to click to proceed
    It keeps the first slide paused until the user is ready
    Yeah, before someone comes along and says: (in an annoyingly nasal tone) Mr. Man, you KNOW there is an option in Captivate to keep it paused at the start... I'm well aware that Captivate offers this option without adding a button, but I prefer it for the reasons above.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • "Clean Up By..." keyboard shortcut is not working

    For some reason, when I am in a Finder window or on my desktop, the "Clean Up By..." Kind, Name, Size etc shortcut is not working. I normally click use "Option + Command + 2" to clean up my desktop by kind. This no longer works. I have to go into the "View, Clean Up By..." menu to have this take place. The keyboard shortcut still appears to be mapped to this menu option (as can be seen in the attached screenshot). I have also went into system preferences and reset my keyboard shortcuts to default.

    You're most welcome. Thanks for posting back and letting me know. Glad to help.
    PS: You may want to mark my post here as Solved as it solved your problem and may help others with the same problem that find your topic know the post that contains the answer. Click the Solved button in that post above.
    Marking posts that are helpful or solve the problem as Helpful or Solved, respectively, helps others find answers and awards points to those who take the time to respond. See "Why reward points?".
    Marking a topic as Answered indicates the question is resolved, but only you, as the person who asked the question, can mark posts as Helpful or Solved. The "Answered" status neither awards points nor provides an indication to others of the posts that were either helpful or solved the problem.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X

  • Ctrl+= "make font size larger" keyboard shortcut is not working, maybe related to Windows 7?

    I changed recently from Windows XP to Windows 7 64bit, and since then the keyboard shortcut Ctrl+= to make "font size larger" is not working anymore. Ctrl+- to make "font size smaller" is working like always. I tried this with LV8.5 and LV2011 and the missing functionality is on both LV-versions. So I wonder if this is related to Windows 7... Or am I missing something?
    Any ideas?
    I tried to switch keyboard input language without success. Then searched for menu shortcuts in the LV options, where Ctrl+= is not listed as it is only a keyboard shortcut and not in the menu. I wonder also why the whole font setting is so nestled in LV, why not just having a toolbar...
    Looking forward for any help.

    It works for me. I'm using Windows 7 64-bit, but I'm running LabVIEW 8.2, so I can't test this on other versions. Are you sure you don't have some extension installed that's using that keyboard shortcut?
    I tried to switch keyboard input language without success. Then searched for menu shortcuts in the LV options, where Ctrl+= is not listed as it is only a keyboard shortcut and not in the menu. I wonder also why the whole font setting is so nestled in LV, why not just having a toolbar...
    http://forums.ni.com/t5/LabVIEW-Idea-Exchange/A-text-toolbar/idi-p/953534

  • Gnome-shell keyboard shortcuts do not work with only conky running

    This is best described by a video showing the bug. You can see the video here http://www.youtube.com/watch?v=tZWdExRxq-I.
    Description
    The gnome-shell keyboard shortcuts like Alt+F2,Alt+F1 and the media key shortcuts do not work if conky is the only program running. However if I open any other application like gedit or vlc or firefox or anything then the keyboard shortcuts work.
    This is not a bug due to any upgrade or anything...I just installed arch linux 4-5 days before...and then installed conky 2 days. However I just noticed that the bug was due to conky. If conky is not running it all works perfectly...How do I solve this problem?
    Hope I provided sufficient information....

    spark666 wrote:i have it like this alignment top_right .till now it worked.but ty,no problem ill let it on the left.at least it works:)
    I'm having the same problem. I ended up putting
    gap_x 1595
    in my conkyrc (1080p display) to force it back to the right side. Took a little bit of trial and error, but at least it works as it is supposed to and is placed where I want it.

  • Sleep keyboard shortcut does not work in 10.4.6

    I just updated to 10.4.6 over the weekend. Unfortunately I realised that the sleep functionality seems to be broken. I have setup my machine to not go to sleep at all, but it tends to doze away after a few hours of being alive.
    Further, I used to use the keyboard shortcut Option-Command-Eject to put my machine to sleep, but this doesn't seem to work now.
    Anybody has any experience with this problem ?
    Thanks,
    Gov
    iMac G5   Mac OS X (10.4.6)  

    This is related to the preference :
    Search for text when I start typing
    With the above preference enabled :
    and e10s turned off keyboard shortcut [ correctly is sent to Gmail
    however with e10s turned ON keyboard shortcut [ triggers page search instead of getting sent to Gmail
    Workaround - with e10s enabled then disable preference
    Search for text when I start typing
    only then keyboard shortcut [ correctly is sent to Gmail

  • Dead_greek keyboard shortcut does not work in gtk2 apps

    I have set the right windows key as dead_greek via xmodmap.
    This works great in Qt, GTK3 and non-toolkit apps, but not in GTK2 apps (Firefox, Thunderbird, Pluma, etc.).
    Any ideas on how to make it work in GTK2 apps?
    This is my .Xmodmap:
    remove Mod4 = Super_R
    keycode 134 = dead_greek NoSymbol Super_R

    This is related to the preference :
    Search for text when I start typing
    With the above preference enabled :
    and e10s turned off keyboard shortcut [ correctly is sent to Gmail
    however with e10s turned ON keyboard shortcut [ triggers page search instead of getting sent to Gmail
    Workaround - with e10s enabled then disable preference
    Search for text when I start typing
    only then keyboard shortcut [ correctly is sent to Gmail

  • Keyboard shortcuts do not work in Microsoft word

    Why sometimes the keyboard shortcuts (e.g. command a, command c, commad v) do not work in Microsoft word?
    And when I encounter this problem, I need to restart my mac. It's troublesome!
    What happen? Is this the problem of my mac or my microsoft office?

    I am working. I modified one shortcut and used that shortcut. It worked then all the other shortcuts worked. I had to use the modified shortcut first to make shortcuts start up again. This is a buggy piece of software.

  • Keyboard shortcuts does not work

    Since I upgraded to iOS 8 my keyboard shortcuts sync between iPhone 5s and iPad Mini Retina do not work... I tried to use another Apple ID. Also tried full restores, but no effect yet. Any ideas?
    Thank You very much!

    Update on shortcut issues... the only solution that is reportedly working is detailed below. This has been used to fix both the reappearing shortcuts issue and/or the keyboard shortcuts crash on iOS.
    (1) On any affected iOS device go to Settings > General > Reset > Erase all Content And Settings
    (WARNING this will obviously delete everything so you must be willing to go this far with no guarantee)
    (2) If you also have a Mac(s) proceed to step (3) otherwise skip to step (6)
    (3) On Mac, go to System Preferences > Keyboard >Text Tab and delete ALL the shortcuts you have there.
    (4) Using Terminal app on your Mac, the following command will place a “Real iCloud Drive" folder on your desktop which will allow you to see ALL the hidden items in iCloud Drive:
    ln -s ~/Library/Mobile\ Documents/ ~/Desktop/Real\ iCloud\ Drive
    (5) Open this new iCloud Folder alias (you must choose to view it in a Finder window as list view).  Inside this folder is the folder called "Settings" and inside that, "Dictionaries.” Delete the “Dictionaries” folder and empty trash.
    (6) Set up your iOS device(s) as NEW. Meaning, you must manually reinstall any apps, settings, etc. Do NOT restore from iTunes or iCloud backup as that will just leave you with the same corrupted issue. Before going through all the time that takes, start with singing into your device with your Apple/iCloud ID and see if the shortcuts issue seem to be fixed and when you enter new ones they sync between devices and/or Mac.
    - This solution was suggested to me by a developer and it seems to have worked for my iOS shortcuts crashing & syncing debacle. The issues have not reappeared for the last week and all the shortcuts are properly syncing between an iPhone, iPad and 2 Macs. Please don’t get angry with me if you try this and it doesn’t work for you. I’m just sharing an option.
    - I continue to submit feedback to Apple about the issue and have still been having followup calls with AppleCare. They just keep saying “a fix will be in an upcoming iOS software update.” They’ve been saying that to me me since iOS 8.0 and we are now at 8.1.3…

  • Command-S keyboard shortcut is not working

    Hi!
    On our (pre-iSight) 17" iMacG5 running 10.4.6 my son (logged in to his own account) can't use the keyboard shortcut Command-S to save documents (confirmed not to work in Pages and TextEdit - both made by Apple). Using the mouse he can select and use the Save command from the Edit meny.
    In all other accounts everything is normal.
    There was a topic called: "Keyboard Shortcut not working" that spanned from Nov 15 to Dec 30, 2005 but the topic was then for some reason archived.
    In this topic the last post stated:
    "Hey!
    Well I kinda have the same problem. It´s just another combo, that´s not working. It is "command+s" for saving files in various apps and it doesnt work in a single app. "Shiftcmds" for "save as" works just fine.
    I did a lot of restarts, checked the keyboard shortcut prefs, repaired permissions but the problem still remains. Anybody an idea what to do? Ersaing any .plist files or something?
    Oh, and it still works when I switch to another user!"
    That user had a MacMini (no details).
    In December 2005 there was no 10.4.6 and the other user had a MacMini, so this has to be a problem NOT with a specific Mac-model or a specific version of the OS.
    Maybe with Apple-software?
    Anyone got a clue!?!?
    Best regards,
    Matts
    iMacG5 17"   Mac OS X (10.4.6)   Factoryadded Bluetooth & Airport

    You're most welcome. Thanks for posting back and letting me know. Glad to help.
    PS: You may want to mark my post here as Solved as it solved your problem and may help others with the same problem that find your topic know the post that contains the answer. Click the Solved button in that post above.
    Marking posts that are helpful or solve the problem as Helpful or Solved, respectively, helps others find answers and awards points to those who take the time to respond. See "Why reward points?".
    Marking a topic as Answered indicates the question is resolved, but only you, as the person who asked the question, can mark posts as Helpful or Solved. The "Answered" status neither awards points nor provides an indication to others of the posts that were either helpful or solved the problem.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X

  • Some keyboard shortcuts are not working

    I have found a few keyboard shortcuts that don't work, no matter what you set the shortcut to. I only found two, and they are "Show Desktop", and "Show Launchpad". I have set them to many different combinations, none of which seem to work. every once in a while, it will work, but after my computer goes to sleep, it doesn't work again. It only works some of the times after I restart or shutdown. When I open the shortcut tab under the keyboard settings menu, it always defaults to the screenshots tab, and I don't know if this is a bug or not.

    there may be a conflict with some system-level shortcuts, for instance the shortcuts in the System Prefs for Dashboard and Expose default to F9, F10, F11, which will supersede the default FCP shortcuts for insert, overwrite, and replace edits.
    Check your keyboard layouts in FCP - if the shortcuts are assigned, then check those two System Prefs panes (keyboard, Dashboard & Expose) for system-level shortcuts that might be conflicting.

Maybe you are looking for